English 
Español 
Tiếng Việt 
Русский 
العربية DIN 933 black oxide hex bolts supplier
XZ Fastener supplies DIN 933 black oxide hex bolts for buyers who need full-thread metric hex head bolts with a dark surface, controlled dimensions, and practical assembly performance. Black oxide is often selected for indoor machinery, fixtures, equipment frames, and oiled assemblies where low coating buildup and appearance are important. Sizes, strength grades, packaging, and inspection requirements can be reviewed according to order requirement. Buyers can also compare black oxide DIN 933 bolts with zinc plated DIN 933 bolts and hot dip galvanized DIN 933 bolts before confirming the finish.
Quick Specs
What Buyers Should Know Before Sourcing DIN 933 Black Oxide Hex Bolts
Confirm full thread and standard
DIN 933 full thread hex bolts are used when continuous thread engagement is required along the shank. If the project drawing allows DIN 933 or ISO 4017, confirm the standard, length under head, thread pitch, and grade before quotation. Buyers can review related DIN 931 and DIN 933 black oxide carbon steel hex head bolts for product reference.
Understand the black oxide finish
Black oxide is a thin conversion finish that gives a dark appearance and limited corrosion protection when used with oil. It is often chosen when the buyer wants a darker surface and less coating buildup than heavier corrosion-resistant finishes. For heavier outdoor protection, another coating may be more suitable.
Separate full thread from partial thread
DIN 933 bolts are fully threaded, while DIN 931 bolts are partially threaded. This matters for grip length, nut position, and thread engagement. If the purchase record is unclear, the DIN 933 vs DIN 931 guide can help confirm the correct description.
Match grade to assembly load
Grade 8.8 carbon steel hex bolts are commonly used for machinery and structural assemblies. Grade 10.9 may be requested for higher strength applications, but the nut grade, washer hardness, tightening method, and service conditions should also be reviewed before order confirmation.
Common Purchasing Descriptions
Procurement teams may describe the same or related items in different ways. Clear wording helps confirm material, grade, finish, inspection scope, and packaging requirements.
- DIN 933 black oxide hex bolts, full thread, metric coarse thread
- DIN 933 full thread hex bolts, black oxide and oiled finish
- Grade 8.8 carbon steel hex bolts, black oxide, DIN 933 / ISO 4017
- Metric hex head bolts, M6 to M36, full thread, carbon steel
- Black oxide DIN 933 bolts for machinery and fixture assembly
- Zinc plated DIN 933 bolts for buyers comparing indoor corrosion protection
- Hot dip galvanized DIN 933 bolts for projects requiring heavier outdoor coating
For additional bolt, nut, washer, screw, and custom part sourcing, buyers can browse XZ Fastener’s fastener products.
Detailed Specifications Table
| Item | Typical Supply Information | Buyer Notes |
|---|---|---|
| Product | DIN 933 black oxide hex bolts | Full-thread metric hex head bolts with dark finish and oil protection. |
| Standard | DIN 933, ISO 4017 equivalent discussion available | Confirm whether the drawing requires DIN, ISO, or buyer-specific reference. |
| Size Range | Common metric sizes such as M6-M36, other sizes upon review | Provide diameter, length under head, thread pitch, and quantity for each size. |
| Thread | Full thread, metric coarse thread commonly requested | Fine thread or special pitch should be clearly shown in the inquiry. |
| Strength Class | 4.8, 8.8, 10.9 according to order requirement | Grade selection should match the assembly load and mating nut or washer requirement. |
| Material | Carbon steel or alloy steel depending on grade | Higher grades usually require controlled heat treatment and mechanical inspection. |
| Finish | Black oxide with oil, or other finishes upon request | State appearance, oil requirement, corrosion expectation, and packing protection. |
| Inspection | Dimension, thread gauge, hardness, surface, coating, packing check | Mechanical report or third-party inspection can be discussed before order. |
| Packaging | Bulk carton, small box, pallet, or buyer-specified packaging | Include carton weight limit, label format, barcode, and anti-rust packing requirement. |
Material and Grade Explanation
DIN 933 black oxide hex bolts are usually ordered in carbon steel or alloy steel according to the required property class. Grade 8.8 carbon steel hex bolts are common for machinery, brackets, and general steel assemblies. Higher grades such as 10.9 may be used where the design requires higher strength, but grade changes should be approved according to the project specification.
Buyers comparing mechanical classes can review XZ Fastener’s ISO 898-1 bolt grades guide. Bolt grade, nut grade, washer hardness, tightening method, and finish should be considered together because each factor affects final assembly performance.
Surface Finish Selection Guide
Black Oxide
Black oxide DIN 933 bolts are suitable for dark appearance, low coating buildup, and controlled indoor assemblies. Oil protection is usually important because black oxide alone is not intended for heavy corrosion exposure.
Zinc Plated
Zinc plated DIN 933 bolts are commonly selected for general indoor corrosion protection and bright or yellow appearance. Buyers comparing zinc plating with black oxide should consider appearance, corrosion expectation, and any high-strength process concerns.
Hot Dip Galvanized
Hot dip galvanized DIN 933 bolts may be considered for outdoor steelwork, but the coating is thicker and can affect thread fit. Buyers can compare coating options in the surface finish comparison chart.
Zinc Flake and Other Coatings
Zinc flake coatings may be discussed when corrosion resistance is needed without electroplating. Color, thickness, friction, and salt spray requirements should be confirmed. XZ Fastener’s fastener coating guide explains common coating choices for industrial fasteners.
Manufacturing and Quality Control
Production typically includes material review, heading, thread rolling, heat treatment where required, black oxide finishing, oil application, sorting, and packing. Key dimensional checks include diameter, length under head, across flats, head height, thread pitch, full thread length, chamfer, and bearing surface. Surface checks may include appearance, oil coverage, and protection during packing.
Thread verification is important for metric hex head bolts because the coating and oil should not create assembly problems. Buyers can request thread gauge checks according to order requirement. The Go/No-Go thread gauge testing guide explains a practical inspection method for bolts, nuts, and screws.
Applications
- Machinery manufacturing, fixture assembly, and equipment maintenance
- Indoor steel frames, brackets, supports, and machine guards
- Tooling, jigs, clamps, conveyors, and automation equipment
- Assemblies requiring a dark surface and low coating buildup
- General engineering use where black oxide with oil protection is acceptable
For outdoor or wet environments, buyers should compare black oxide with zinc plating, hot dip galvanizing, or zinc flake coatings before confirming the order. The zinc plated vs hot dip galvanized bolts guide can help when heavier corrosion protection is being considered.
How to Get a Faster Quotation
Prepare a clear size list with diameter, length, pitch, grade, finish, quantity, packaging method, delivery destination, and inspection requirements. If the black oxide bolts must match a drawing, sample, or previous purchase record, attach those files with the inquiry. Buyers can request a quote for DIN 933 black oxide hex bolts and related fasteners.
FAQ
Are DIN 933 black oxide hex bolts fully threaded?
Yes. DIN 933 is a full-thread hex head bolt standard. If the assembly needs a partial thread, DIN 931 or another drawing-controlled standard should be checked.
Is black oxide suitable for outdoor bolts?
Black oxide is generally used for controlled indoor applications and usually needs oil protection. For outdoor or wet environments, zinc plating, hot dip galvanizing, or zinc flake coating may be more suitable.
Can Grade 8.8 carbon steel hex bolts be supplied with black oxide?
Grade 8.8 carbon steel hex bolts can be discussed with black oxide finish according to size, grade requirement, inspection scope, and order quantity.
What should be specified for black oxide DIN 933 bolts?
Buyers should specify size, length, thread pitch, grade, black oxide and oil requirement, quantity, packaging method, and required inspection documents.
Does black oxide change thread fit?
Black oxide is a thin finish and usually has less buildup than heavier coatings, but thread fit should still be checked when the assembly has strict tolerance requirements.
Can XZ Fastener supply matching nuts and washers?
Matching nuts and washers can be discussed according to order requirement. Provide the bolt grade, finish, standard reference, and assembly condition for compatibility review.
Send Your DIN 933 Black Oxide Hex Bolt Inquiry
For a faster response, send your size list, finish, quantity, packaging method, and inspection requirements. XZ Fastener can review DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, hot dip galvanized DIN 933 bolts, and related fasteners according to order requirement.
Request a quote with your drawing, purchase list, or project specification.