{"id":8774,"date":"2024-08-08T21:13:46","date_gmt":"2024-08-08T13:13:46","guid":{"rendered":"https:\/\/xzfastener.com\/?p=8774"},"modified":"2026-06-29T21:15:09","modified_gmt":"2026-06-29T13:15:09","slug":"fasteners-for-steel-structures-types-standards-and-selection-tips-2","status":"publish","type":"post","link":"https:\/\/xzfastener.com\/es_mx\/fasteners-for-steel-structures-types-standards-and-selection-tips-2\/","title":{"rendered":"Fijaciones para estructuras de acero: tipos, normas y consejos de selecci\u00f3n"},"content":{"rendered":"<p>Steel structure buyers usually ask the same practical question: which bolts, nuts, washers, and anchors should be used for the project without creating approval, installation, or safety problems?<\/p>\n\n\n\n<p>The answer starts with the connection type. A warehouse frame, bridge splice, equipment platform, transmission tower, and base plate anchor group do not always use the same fastener system. In steel construction, the fastener is not just hardware. It is part of the load path.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Main Fastener Types Used in Steel Structures<\/h2>\n\n\n\n<p>Structural projects commonly use several fastener groups. Each has a different role.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Tipo de sujetador<\/th><th>Uso com\u00fan<\/th><th>Punto clave de compra<\/th><\/tr><\/thead><tbody><tr><td>Pernos estructurales<\/td><td>Beam, column, splice, and bracing connections<\/td><td>Grade, standard, head type, thread length<\/td><\/tr><tr><td>Heavy hex nuts<\/td><td>Matched with structural bolts<\/td><td>Grado de tuerca y ajuste de rosca<\/td><\/tr><tr><td>Arandelas endurecidas<\/td><td>Bearing surface and preload control<\/td><td>Washer hardness, OD, and thickness<\/td><\/tr><tr><td>Pernos de anclaje<\/td><td>Placas base y cimientos.<\/td><td>ASTM grade, length, thread, bend or plate detail<\/td><\/tr><tr><td>varillas roscadas<\/td><td>Support systems, bracing, embedment, repair<\/td><td>Material grade and straightness<\/td><\/tr><tr><td>U-bolts and clamps<\/td><td>Pipe supports, brackets, secondary steel<\/td><td>Shape accuracy and coating<\/td><\/tr><tr><td>Standard hex bolts<\/td><td>Non-critical framing, guards, accessories<\/td><td>Correct standard and strength class<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Para abastecimiento general, los compradores pueden revisar los disponibles <a href=\"https:\/\/xzfastener.com\/es_mx\/home\/products\/\">productos de fijaci\u00f3n<\/a>, then separate structural load-bearing items from ordinary accessory hardware.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Standards Buyers Should Recognize<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">ASTM and Inch-Series Projects<\/h3>\n\n\n\n<p>In U.S. and many export markets, structural bolting often refers to ASTM F3125 grades such as A325 and A490. Buyers may still write \u201cA325 bolts\u201d or \u201cA490 bolts\u201d in RFQs, but the current project specification should be checked carefully.<\/p>\n\n\n\n<p>Related components may include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>ASTM A563 nuts<\/li>\n\n\n\n<li>ASTM F436 hardened washers<\/li>\n\n\n\n<li>ASTM F1554 pernos de anclaje<\/li>\n\n\n\n<li>ASTM A307 bolts for lower-strength general use<\/li>\n<\/ul>\n\n\n\n<p>Do not replace one ASTM grade with another based only on size. Grade, material, mechanical properties, marking, and installation method matter.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Metric and European Projects<\/h3>\n\n\n\n<p>Metric steel structures may reference ISO, DIN, or EN standards. EN 14399 is commonly associated with high-strength structural bolting assemblies for preloading. EN 15048 may be used for non-preloaded structural bolting assemblies. Older DIN references such as DIN 6914, DIN 6915, and DIN 6916 may still appear in drawings or replacement orders.<\/p>\n\n\n\n<p>For metric RFQs, this <a href=\"https:\/\/xzfastener.com\/es_mx\/din-iso-fastener-standards-complete-overview-for-industrial-buyers\/\">Gu\u00eda de est\u00e1ndares de sujetadores DIN y ISO<\/a> can help buyers avoid assuming that similar standards are automatically interchangeable.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Selecci\u00f3n de materiales y resistencia<\/h2>\n\n\n\n<p>Steel structure fasteners are commonly carbon steel or alloy steel. The required grade depends on the design load, connection type, and installation procedure.<\/p>\n\n\n\n<p>Compradores abasteci\u00e9ndose <a href=\"https:\/\/xzfastener.com\/es_mx\/fastener-material\/carbon-steel\/\">acero al carbono sujetadores<\/a> should confirm:<\/p>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li>Standard and grade.<\/li>\n\n\n\n<li>Diameter, length, and thread length.<\/li>\n\n\n\n<li>Nut and washer grade.<\/li>\n\n\n\n<li>Mechanical test requirements.<\/li>\n\n\n\n<li>Required head marking.<\/li>\n\n\n\n<li>Whether the joint is preloaded or non-preloaded.<\/li>\n<\/ol>\n\n\n\n<p>Higher strength is not always better. A490-class fasteners, for example, require stricter control than lower-strength general bolts. Use the grade specified by the engineer or project standard.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Surface Finish and Corrosion Protection<\/h2>\n\n\n\n<p>Steel structures often sit outdoors. Coating selection should match exposure.<\/p>\n\n\n\n<p>Common finishes include plain, black oxide, zinc plated, hot-dip galvanized, zinc flake, and other project-specified coatings. For outdoor steel structures, hot-dip galvanizing is frequently selected because it provides heavier zinc protection than ordinary electroplating.<\/p>\n\n\n\n<p>Para la selecci\u00f3n del recubrimiento, revise <a href=\"https:\/\/xzfastener.com\/es_mx\/products-category\/various-coated-fasteners\/\">sujetadores recubiertos<\/a> and confirm the full assembly: bolt, nut, and washer.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Galvanized Thread Fit<\/h3>\n\n\n\n<p>Hot-dip galvanizing adds coating thickness. Nuts may need to be tapped oversize after galvanizing. If this is not controlled, installers may find that nuts bind before proper tightening.<\/p>\n\n\n\n<p>This is a common site problem. It is not solved by forcing the nut. It is solved by specifying matched galvanized assemblies and checking thread fit before shipment.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Consejos de selecci\u00f3n para compradores<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Match the Fastener to the Connection<\/h3>\n\n\n\n<p>Preloaded slip-critical connections, bearing-type connections, anchor connections, and secondary steel supports have different requirements. Do not use a single bolt type across all locations unless the project design allows it.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Buy Assemblies When Possible<\/h3>\n\n\n\n<p>For structural joints, order bolts, nuts, and washers as matched sets when the standard requires it or when coating fit is important. This reduces field mismatch.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Check Thread Length<\/h3>\n\n\n\n<p>Too much thread in the shear plane may reduce joint performance. Too little thread may prevent full nut engagement. Confirm grip length and washer stack before placing the order.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Control Documentation<\/h3>\n\n\n\n<p>Steel structure projects often require traceable reports. Ask for the documents before production, not after shipment.<\/p>\n\n\n\n<p>Los documentos \u00fatiles incluyen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Certificado de materiales<\/li>\n\n\n\n<li>Informe de prueba mec\u00e1nica<\/li>\n\n\n\n<li>Informe de dureza<\/li>\n\n\n\n<li>Informe de espesor de recubrimiento<\/li>\n\n\n\n<li>Informe de inspecci\u00f3n dimensional<\/li>\n\n\n\n<li>Lot traceability record<\/li>\n\n\n\n<li>Packing list by size and lot<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Errores de compra comunes<\/h2>\n\n\n\n<p>Evite estos errores:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Comparing prices without confirming the exact standard.<\/li>\n\n\n\n<li>Mixing structural bolts with general hex bolts.<\/li>\n\n\n\n<li>Ordering bolts without compatible nuts and washers.<\/li>\n\n\n\n<li>Using zinc plated fasteners for severe outdoor exposure without review.<\/li>\n\n\n\n<li>Ignoring thread fit after galvanizing.<\/li>\n\n\n\n<li>Accepting unclear labels on mixed-size shipments.<\/li>\n\n\n\n<li>Changing standards without engineering approval.<\/li>\n<\/ul>\n\n\n\n<p>For common items, <a href=\"https:\/\/xzfastener.com\/es_mx\/products-category\/standard-fasteners\/\">sujetadores est\u00e1ndar<\/a> may cover many project needs. For special base plates, long anchors, bent rods, or drawing-based hardware, custom production may be required.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">RFQ Checklist for Steel Structure Fasteners<\/h2>\n\n\n\n<p>Antes de solicitar una cotizaci\u00f3n, proporcione:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Project standard or drawing.<\/li>\n\n\n\n<li>Bolt type, size, length, and grade.<\/li>\n\n\n\n<li>Est\u00e1ndar de tuerca y arandela.<\/li>\n\n\n\n<li>Finish and coating thickness requirement.<\/li>\n\n\n\n<li>Quantity by each size.<\/li>\n\n\n\n<li>Required certificates and inspection reports.<\/li>\n\n\n\n<li>Packing method and label format.<\/li>\n\n\n\n<li>Delivery schedule and destination.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Consejo final<\/h2>\n\n\n\n<p>Fasteners for steel structures should be selected as engineered assemblies, not loose commodity items. A clear RFQ protects the buyer, fabricator, installer, and final owner.<\/p>\n\n\n\n<p>For project review, buyers can <a href=\"https:\/\/xzfastener.com\/es_mx\/home\/contact-us\/\">contacto XZ Fastener<\/a> with drawings, size lists, standards, finish requirements, quantities, packing details, and inspection documents.<\/p>","protected":false},"excerpt":{"rendered":"<p>Steel structure buyers usually ask the same practical question: which bolts, nuts, washers, and anchors should be used for the project without creating approval, installation, or safety problems? The answer starts with the connection type. A warehouse frame, bridge splice, equipment platform, transmission tower, and base plate anchor group do not always use the same [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[479],"tags":[483],"class_list":["post-8774","post","type-post","status-publish","format-standard","hentry","category-fastener-knowledge-library","tag-industry-application-guides"],"acf":[],"_links":{"self":[{"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/posts\/8774","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/comments?post=8774"}],"version-history":[{"count":1,"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/posts\/8774\/revisions"}],"predecessor-version":[{"id":8775,"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/posts\/8774\/revisions\/8775"}],"wp:attachment":[{"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/media?parent=8774"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/categories?post=8774"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/xzfastener.com\/es_mx\/wp-json\/wp\/v2\/tags?post=8774"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}