{"id":6701,"date":"2022-06-09T17:10:45","date_gmt":"2022-06-09T09:10:45","guid":{"rendered":"https:\/\/xzfastener.com\/?p=6701"},"modified":"2026-06-18T17:12:22","modified_gmt":"2026-06-18T09:12:22","slug":"how-to-read-fastener-inspection-reports-before-accepting-an-order","status":"publish","type":"post","link":"https:\/\/xzfastener.com\/fr\/how-to-read-fastener-inspection-reports-before-accepting-an-order\/","title":{"rendered":"Comment lire les rapports d'inspection des fixations avant d'accepter une commande"},"content":{"rendered":"<p>A fastener inspection report should not be treated as a formality. Before accepting an order, buyers need to check whether the report actually matches the goods, the purchase order, and the project requirement.<\/p>\n\n\n\n<p>Many delivery disputes start with one simple problem: the report looks complete, but the batch number, size, grade, coating, or test item does not match the shipped fasteners.<\/p>\n\n\n\n<p>The report must prove the order is correct. It should not just fill a document folder.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Start With Product Identification<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Match the Report to the Purchase Order<\/h3>\n\n\n\n<p>The first page should identify the product clearly. Check the report against the PO, drawing, invoice, and packing list.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Item to Check<\/th><th>Que confirmer<\/th><\/tr><\/thead><tbody><tr><td>Nom du produit<\/td><td>Bolt, nut, washer, screw, anchor, stud, or assembly<\/td><\/tr><tr><td>Norme<\/td><td>DIN, ISO, ASTM, ASME, EN, or drawing number<\/td><\/tr><tr><td>Taille<\/td><td>Diam\u00e8tre, longueur, pas, longueur de filetage<\/td><\/tr><tr><td>Mat\u00e9riel<\/td><td>Carbon steel, alloy steel, stainless steel, or special material<\/td><\/tr><tr><td>Note<\/td><td>8.8, 10.9, 12.9, A2-70, A4-80, B7, etc.<\/td><\/tr><tr><td>Terminer<\/td><td>Zingu\u00e9, HDG, oxyde noir, flocons de zinc, PTFE, uni<\/td><\/tr><tr><td>Num\u00e9ro de lot<\/td><td>Must match labels, cartons, and certificates<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>For common industrial items, buyers can compare <a href=\"https:\/\/xzfastener.com\/fr\/products-category\/standard-fasteners\/\">attaches standards<\/a> before confirming the inspection scope.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Check Dimensional Inspection<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Size and Thread Fit Matter First<\/h3>\n\n\n\n<p>Dimensional inspection should cover more than overall length. For fasteners, thread fit is often where problems appear.<\/p>\n\n\n\n<p>Key items include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Diam\u00e8tre<\/li>\n\n\n\n<li>Longueur<\/li>\n\n\n\n<li>Pas de filetage<\/li>\n\n\n\n<li>Longueur du fil<\/li>\n\n\n\n<li>Taille de la t\u00eate<\/li>\n\n\n\n<li>Cotes sur plats<\/li>\n\n\n\n<li>ID, diam\u00e8tre ext\u00e9rieur et \u00e9paisseur de la rondelle<\/li>\n\n\n\n<li>Nut height and thread engagement<\/li>\n<\/ul>\n\n\n\n<p>For bolt and washer assemblies, buyers can review <a href=\"https:\/\/xzfastener.com\/fr\/fastener-type\/bolts\/\">produits de boulons<\/a> et <a href=\"https:\/\/xzfastener.com\/fr\/fastener-type\/washers\/\">produits de laveuse<\/a> when checking matched sets.<\/p>\n\n\n\n<p>If the report does not include thread gauge results, ask for clarification before accepting the order.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Review Mechanical Test Results<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Do Not Accept Grade Claims Without Data<\/h3>\n\n\n\n<p>For load-bearing fasteners, the report should include mechanical properties. These may include hardness, tensile strength, proof load, yield strength, or wedge tensile testing, depending on the standard.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Article de test<\/th><th>Pourquoi c'est important<\/th><\/tr><\/thead><tbody><tr><td>Duret\u00e9<\/td><td>Confirme la coh\u00e9rence du traitement thermique<\/td><\/tr><tr><td>R\u00e9sistance \u00e0 la traction<\/td><td>Verifies load capacity<\/td><\/tr><tr><td>Charge d'\u00e9preuve<\/td><td>Confirms the fastener can hold specified load<\/td><\/tr><tr><td>Limite d'\u00e9lasticit\u00e9<\/td><td>Important for high-strength design<\/td><\/tr><tr><td>Essai de traction en coin<\/td><td>Checks bolt head and shank integrity<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Pour <a href=\"https:\/\/xzfastener.com\/fr\/products-category\/high-strength-fasteners\/\">attaches \u00e0 haute r\u00e9sistance<\/a>, mechanical testing should match the stated grade and batch.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Check Coating Reports<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Coating Affects Corrosion and Assembly<\/h3>\n\n\n\n<p>Surface finish is not only visual. Coating thickness can affect corrosion resistance, thread fit, and tightening behavior.<\/p>\n\n\n\n<p>Pour <a href=\"https:\/\/xzfastener.com\/fr\/products-category\/various-coated-fasteners\/\">attaches enduites<\/a>, check:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Type de rev\u00eatement<\/li>\n\n\n\n<li>\u00c9paisseur du rev\u00eatement<\/li>\n\n\n\n<li>Salt spray requirement, if specified<\/li>\n\n\n\n<li>Adhesion or visual condition<\/li>\n\n\n\n<li>Baking record for high-strength electroplated parts<\/li>\n\n\n\n<li>Batch number linked to the coating report<\/li>\n<\/ol>\n\n\n\n<p>A zinc plated report should not be used for a hot-dip galvanized shipment. A coating report without batch traceability has limited value.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Verify Material Certificates<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Certificat d'essai de mat\u00e9riaux<\/h3>\n\n\n\n<p>The MTC should show material grade, heat number, chemical composition, and sometimes mechanical properties. For stainless steel or special alloy orders, PMI may also be required.<\/p>\n\n\n\n<p>Check whether the heat number on the MTC matches the production batch. If the fastener is custom-made, the drawing revision should also be listed.<\/p>\n\n\n\n<p>Pour les produits bas\u00e9s sur des dessins, utilisez <a href=\"https:\/\/xzfastener.com\/fr\/products-category\/custom-non-standard-fasteners\/\">fixations non standard sur mesure<\/a> and request a dimensional report against the approved drawing.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Check Packing and Traceability<\/h2>\n\n\n\n<p>Inspection reports should match physical shipment labels.<\/p>\n\n\n\n<p>Before accepting an order, confirm:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Carton labels match the packing list<\/li>\n\n\n\n<li>Batch numbers match test reports<\/li>\n\n\n\n<li>Quantity matches the PO<\/li>\n\n\n\n<li>Mixed sizes are clearly separated<\/li>\n\n\n\n<li>Certificates are signed and dated<\/li>\n\n\n\n<li>Report units are correct: mm, inch, MPa, HRC, kg, or pcs<\/li>\n<\/ul>\n\n\n\n<p>For full shipment planning, buyers can review the complete <a href=\"https:\/\/xzfastener.com\/fr\/home\/products\/\">produits de fixation<\/a> range and define inspection requirements by product type.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conseil final<\/h2>\n\n\n\n<p>A fastener inspection report should answer three questions: what was tested, which batch was tested, and whether the results meet the order requirement.<\/p>\n\n\n\n<p>Before accepting an order, check product identity, dimensions, thread fit, mechanical properties, coating, material certificate, and traceability. If the report does not match the goods, do not approve shipment until the supplier explains and corrects it.<\/p>","protected":false},"excerpt":{"rendered":"<p>A fastener inspection report should not be treated as a formality. Before accepting an order, buyers need to check whether the report actually matches the goods, the purchase order, and the project requirement. Many delivery disputes start with one simple problem: the report looks complete, but the batch number, size, grade, coating, or test item [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[479],"tags":[509],"class_list":["post-6701","post","type-post","status-publish","format-standard","hentry","category-fastener-knowledge-library","tag-quality-inspection-testing"],"acf":[],"_links":{"self":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts\/6701","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/comments?post=6701"}],"version-history":[{"count":1,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts\/6701\/revisions"}],"predecessor-version":[{"id":6702,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts\/6701\/revisions\/6702"}],"wp:attachment":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/media?parent=6701"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/categories?post=6701"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/tags?post=6701"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}