{"id":9133,"date":"2026-11-17T12:35:27","date_gmt":"2026-11-17T04:35:27","guid":{"rendered":"https:\/\/xzfastener.com\/?p=9133"},"modified":"2026-11-17T12:35:29","modified_gmt":"2026-11-17T04:35:29","slug":"pickling-passivation-stainless-fastener-rfq","status":"publish","type":"post","link":"https:\/\/xzfastener.com\/fr\/pickling-passivation-stainless-fastener-rfq\/","title":{"rendered":"Pickling and Passivation: Stainless Fastener RFQ Requirements"},"content":{"rendered":"<p>\u201cPassivated stainless steel\u201d is not a complete purchase specification. It leaves the supplier to interpret the process, the acceptance test and the evidence expected with the shipment. A clearer RFQ separates the required surface condition from the documents used to verify it.<\/p>\n<h2>Separate cleaning, pickling and passivation<\/h2>\n<p>These terms should not be used interchangeably. Cleaning addresses contamination on a surface. Pickling can remove scale and an affected surface layer. Passivation concerns the stainless surface and the removal of contamination such as free iron under an agreed process. An order should identify which operation is required rather than treating all three as one finish.<\/p>\n<p>The selected treatment must suit the specified alloy, manufacturing condition and component. This guide does not prescribe chemical concentrations, processing temperatures or immersion times; those belong in the approved process specification.<\/p>\n<h2>Write the required condition for each part<\/h2>\n<p>List the bolt, nut, washer or threaded rod separately. State the material designation and drawing revision, then identify the treatment specification and edition, if required by the project. Ask whether treatment occurs before or after cutting, machining or other operations that affect the final surface.<\/p>\n<p>For a custom threaded part, agree how the final condition will be checked without silently changing the drawing dimensions or thread acceptance requirements. A smooth-looking sample is not a substitute for an agreed inspection criterion.<\/p>\n<h2>Ask what the quotation includes<\/h2>\n<ul>\n<li>Cleaning only, pickling, passivation or an agreed sequence of operations.<\/li>\n<li>The party responsible for treatment and any required subcontractor approval.<\/li>\n<li>The specified verification method, sampling plan and acceptance criteria.<\/li>\n<li>Identification linking the treatment record to the delivered manufacturing lot.<\/li>\n<li>Final packing condition, handling restrictions and required document format.<\/li>\n<\/ul>\n<p>Two quotations using the same finish name may cover different work. Resolve exclusions before comparing prices, especially where one offer includes verification and another supplies only a statement of treatment.<\/p>\n<h2>Keep reports distinct<\/h2>\n<p>A material inspection report addresses the material information within its scope. A dimensional report addresses measured features. Neither should be treated as a passivation verification report unless that examination is explicitly included. Ask the supplier to identify each report and the lot it represents.<\/p>\n<p>Where a customer requires a particular certificate or third-party involvement, confirm the scope and approving organisation before placing the order. Do not assume that a requested document heading automatically establishes the required inspection coverage.<\/p>\n<h2>Protect the accepted condition through packing<\/h2>\n<p>Agree how treated parts will be segregated, labelled and protected during handling and transport. Tell the supplier whether parts will be received as individual items, bags, cartons or project kits. If the buyer plans further cutting or fabrication, refer the resulting surface-condition requirements to the responsible engineer rather than assuming the original treatment covers later work.<\/p>\n<h2>Request a comparable quotation<\/h2>\n<p>Send XZ Fastener the material, drawing or product standard, quantity by size, required surface condition, acceptance requirements and document list. We can review the supply and customisation scope, including material inspection reports, dimensional reports and batch traceability. For EN 10204 3.1\/3.2 or third-party reports, the issuing parties and scope need to be agreed for the actual order.<\/p>\n<p>Start with the <a href=\"https:\/\/xzfastener.com\/fr\/home\/contact-us\/\">quotation form<\/a>, or review <a href=\"https:\/\/xzfastener.com\/fr\/products\/stainless-steel-fully-threaded-rod\/\">stainless threaded rod supply<\/a>. Our <a href=\"https:\/\/xzfastener.com\/fr\/oil-gas-fastener-receiving-checklist\/\">receiving checklist<\/a> can help organise the documents and labels needed at delivery.<\/p>","protected":false},"excerpt":{"rendered":"<p>\u201cPassivated stainless steel\u201d is not a complete purchase specification. It leaves the supplier to interpret the process, the acceptance test and the evidence expected with the shipment. A clearer RFQ separates the required surface condition from the documents used to verify it. Separate cleaning, pickling and passivation These terms should not be used interchangeably. Cleaning [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[109],"tags":[],"class_list":["post-9133","post","type-post","status-publish","format-standard","hentry","category-technical-guides"],"acf":[],"_links":{"self":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts\/9133","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/comments?post=9133"}],"version-history":[{"count":1,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts\/9133\/revisions"}],"predecessor-version":[{"id":9134,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/posts\/9133\/revisions\/9134"}],"wp:attachment":[{"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/media?parent=9133"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/categories?post=9133"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/xzfastener.com\/fr\/wp-json\/wp\/v2\/tags?post=9133"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}