XZ Fastener | Fabricante mundial

📚 Biblioteca

XZ INFORMACIONES

Conocimiento de fijación industrial · Tendencias de la industria · Conocimientos técnicos

DIN 960 rosca fina pernos hexagonales fabricante de pedidos al por mayor

facebook
x
LinkedIn
Reddit
WhatsApp
Correo electrónico

Table of Contents

DIN 960 rosca fina pernos hexagonales fabricante de pedidos al por mayor

XZ Fastener manufactures DIN 960 fine thread hex bolts for bulk orders where pitch control, repeatable dimensions, and batch consistency matter more than a one-time purchase. These metric fine pitch hex bolts are used in machinery, automotive assemblies, structural brackets, and equipment where vibration, limited thread engagement, or precise adjustment must be considered. Bulk buyers can specify carbon steel, alloy steel, or stainless steel, with finishes selected according to exposure conditions. For smooth production, confirm diameter, length, pitch, strength class, coating, packing, and inspection documents before the first batch is released.

Solicitar una cotización Ver productos de sujetadores
DIN 960 fine thread hex bolts bulk order manufacturer product illustration

Especificaciones rápidas

EstándarDIN 960, paso fino métrico, cabeza hexagonal, rosca parcial
fuerza8.8, 10.9, 12.9 y otras clases disponibles bajo petición
Materialesacero al carbono, acero aleado, acero inoxidable 304/A2 y 316/A4
terminarLiso, zincado, óxido negro, galvanizado en caliente, escamas de zinc, pasivado
SolicitudMachinery, automotive assemblies, brackets, equipment, and steelwork

Lo que los compradores deben saber antes de adquirir DIN 960 rosca fina pernos hexagonales

DIN 960 bolts are metric fine thread hex bolts, usually specified when joint control is more important than general-purpose fastening. In bulk production, the most common problem is not the head shape. It is the pitch. A coarse-thread bolt may look similar at receiving, but it will fail the assembly requirement once matched with the nut or tapped hole.

Before issuing a purchase order, confirm the requested pitch against the drawing and the Guía de estándares de sujetadores DIN y ISO. For large quantity programs, the order should also define inspection level, batch marking, packing method, and whether mating nuts or washers are supplied together.

Nota de pedido al por mayor: Fine thread bolts should be checked after coating, not only before surface treatment. Zinc plating, zinc flake, and hot dip galvanizing can affect thread fit in different ways.

Descripciones de compras comunes

Bulk purchase files often include several bolt families in one program. XZ Fastener can review DIN 960 items together with related product descriptions such as DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts.

Descripción común Punto de control de pedidos al por mayor
DIN 960 M10 x 1.25 x 50 Class 8.8 zinc plated Confirm fine pitch, thread length, zinc finish, and carton quantity
DIN 960 M16 x 1.5 x 80 Class 10.9 plain Confirm heat treatment, head marking, hardness, and tensile requirement
Fine thread hex bolts with nuts and washers Confirm matched nut pitch, washer hardness, and assembly packing
DIN 960 assorted size bulk order Confirm size list, quantity per size, lot traceability, and pallet marking

For related bulk supply, see XZ Fastener pernos industriales y sujetadores estándar.

Tabla de especificaciones detalladas

Artículo de especificación Opciones típicas Production Control Point
Estándar DIN 960 Confirm against drawing and purchase order before tooling or batch release
Tipo de hilo Paso fino métrico, rosca parcial Use pitch gauges and go/no-go gauges according to order requirement
Diámetro y longitud Tamaños métricos comunes suministrados según la lista de tamaños del comprador. Measure length under head and confirm thread length tolerance
Clase de fuerza 8.8, 10.9, 12.9; otras clases bajo petición Control material grade, heat treatment, hardness, and tensile result
Materiales acero al carbono, acero aleado, acero inoxidable A2 o A4 Confirm material certificate and any required chemical composition report
terminar Liso, zincado, óxido negro, galvanizado en caliente, escamas de zinc Verifique la apariencia del recubrimiento, los requisitos de espesor y el ajuste de la rosca después del acabado.
Embalaje Cartones a granel, cajas pequeñas, palés de exportación, etiqueta del comprador Confirm carton weight, quantity per box, lot label, and pallet layout

Explicación de materiales y grados

Class 8.8 carbon steel is commonly selected for industrial assemblies that require reliable strength without moving into high-load specialty hardware. Class 10.9 and 12.9 are used where higher tensile performance is required, but these grades also need suitable nuts, washers, tightening control, and surface finish selection.

For harsh environments, stainless steel A2 or A4 may be requested. A4 stainless steel is often preferred for coastal, chemical, or wet service conditions. Buyers comparing structural or equipment joints can also review sujetadores de alta resistencia.

Guía de selección de acabado superficial

terminar Uso de pedidos al por mayor
Llano Indoor assembly, oil protection, or parts needing later treatment
zincado Protección general contra la corrosión con apariencia limpia.
óxido negro Machinery appearance requirement, usually with oil protection
galvanizado en caliente Outdoor exposure where thicker coating is needed
Escamas de zinc Controlled corrosion performance with tighter coating management

For finish-sensitive programs, compare available sujetadores recubiertos antes de aprobar la producción a granel.

Manufactura y Control de Calidad

In bulk manufacturing, consistency across lots is the real test. A DIN 960 bolt batch must keep the same pitch, head dimension, thread length, grade marking, finish, and packing rule from the first carton to the last pallet.

  1. Review drawing, standard, size list, pitch, grade, finish, and packing requirement.
  2. Confirm raw material and heat treatment route before mass production.
  3. Control forming, threading, and thread length during production checks.
  4. Inspect dimensions, pitch, hardness, surface finish, and nut fit after coating.
  5. Pack by size, lot, carton quantity, and export pallet plan.

For drawings, special lengths, head markings, or matched sets, XZ Fastener can discuss sujetadores personalizados Según el requisito del pedido.

Aplicaciones

DIN 960 fine thread hex bolts are used where the assembly design calls for a finer pitch, better adjustment, or stronger resistance to loosening than a common coarse-thread joint. Application approval should always follow the buyer drawing or engineering specification.

  • Automotive and transport assemblies using metric fine pitch fasteners
  • Machinery frames, brackets, and equipment housings
  • Flange connections and tapped-hole assemblies with limited engagement
  • Vibration-prone equipment where pitch selection is part of joint design
  • Distributor stock programs requiring controlled labels and repeat supply

Buyers can review wider productos de fijación when combining DIN 960 bolts with nuts, washers, threaded rods, and other project hardware.

Cómo obtener una cotización más rápida

A bulk order quotation is faster when the request is complete. Send one size table instead of separate messages, and identify every pitch clearly. Fine thread bolts should not be quoted from diameter and length alone.

Información necesaria Ejemplo
Lista de tallas M10 x 1.25 x 50, M12 x 1.25 x 60, M16 x 1.5 x 80
Material y grado Clase 8.8 acero al carbono, Clase 10.9 acero aleado, A4 acero inoxidable
terminar Liso, zincado, óxido negro, galvanizado en caliente, escamas de zinc
Cantidad Pieces per size, shipment batch, or annual forecast
Embalaje Cartón a granel, caja pequeña, embalaje de exportación paletizado, etiqueta del comprador
Requisitos de inspección Informe dimensional, registro de calibre de rosca, prueba de dureza, certificado de material.

Envíe dibujos, descripciones de compra y requisitos de embalaje a través de contacto XZ Fastener for review.

Preguntas frecuentes

What makes DIN 960 different from standard coarse-thread hex bolts?

DIN 960 fine thread hex bolts use metric fine pitch and are generally supplied with partial thread. They are specified when the joint design requires that finer pitch. They should not be replaced by coarse-thread bolts unless the buyer approves the change.

Can XZ Fastener manufacture DIN 960 bolts for bulk orders?

Yes. DIN 960 bolts can be supplied for bulk orders according to confirmed size list, pitch, strength class, material, finish, packing, and inspection requirements.

Which strength classes are commonly used for DIN 960 bolts?

Common options include 8.8, 10.9, and 12.9 for carbon or alloy steel. Stainless steel A2 and A4 options can be supplied when corrosion resistance is the main requirement.

Can DIN 960 fine thread bolts be hot dip galvanized?

Hot dip galvanized finish can be supplied when specified, but thread fit must be checked carefully because the coating is thicker than standard zinc plating. Matching nuts should be confirmed at the same time.

What inspection items should be checked before shipment?

Typical checks include diameter, length under head, thread pitch, thread fit, head dimensions, grade marking, hardness, finish appearance, coating requirement, quantity, and packing marks.

What should buyers send for a complete quotation?

Send the DIN 960 size list, exact fine pitch, material, strength class, finish, quantity per size, packaging method, required documents, and any mating nut or washer requirement.

Prepare Your DIN 960 Bulk Order Request

For accurate production review, send your DIN 960 fine thread hex bolt size list, finish, quantity, packaging method, and inspection requirements. Include matching nuts, washers, carton labels, pallet marks, and document requirements when the order is part of a larger assembly or project supply package.

Solicitar una cotización
Vistas de publicaciones: 761
Buscar artículos
Artículos populares
Suscríbete a noticias técnicas

Conocimiento de fijación industrial · Tendencias de la industria · Conocimientos técnicos

Póngase en contacto rápidamente con un experto en negocios

XZ Ingeniero de ventas

Bulk fastener quotations · MOQ 1,000 pieces

Tell us your fastener requirements. Our sales team will prepare your quotation.

Lead time: 3 days. Custom packaging available. Shipping time and order details are confirmed in your quotation.

Optional: attach drawings, photos or a specification list. Accepted: PDF, JPG, PNG, Word, Excel, XML and TXT.

¡Gracias por visitarnos!

Por favor comparta su consulta con sales@xzfastener.com

PARA WHATSAPP