XZ Fastener | Fabricant mondial

📚 Bibliothèque

APERÇUS XZ

Connaissances en matière de fixation industrielle · Tendances de l'industrie · Informations techniques

Fabricant de commande en gros de boulons hexagonaux à filetage fin DIN 960

Facebook
X
LinkedIn
Reddit
WhatsApp
Courriel

内容目录

Fabricant de commande en gros de boulons hexagonaux à filetage fin DIN 960

XZ Fastener manufactures DIN 960 fine thread hex bolts for bulk orders where pitch control, repeatable dimensions, and batch consistency matter more than a one-time purchase. These metric fine pitch hex bolts are used in machinery, automotive assemblies, structural brackets, and equipment where vibration, limited thread engagement, or precise adjustment must be considered. Bulk buyers can specify carbon steel, alloy steel, or stainless steel, with finishes selected according to exposure conditions. For smooth production, confirm diameter, length, pitch, strength class, coating, packing, and inspection documents before the first batch is released.

Demander un devis Voir les produits de fixation
DIN 960 fine thread hex bolts bulk order manufacturer product illustration

Spécifications rapides

NormeDIN 960, pas fin métrique, tête hexagonale, filetage partiel
Force8.8, 10.9, 12.9 et autres classes disponibles sur demande
MatérielAcier au carbone, acier allié, acier inoxydable 304/A2 et 316/A4
TerminerPlaine, zingué, oxyde noir, galvanisé à chaud, flocons de zinc, passivé
DemandeMachinery, automotive assemblies, brackets, equipment, and steelwork

Ce que les acheteurs doivent savoir avant de se procurer des boulons hexagonaux à filetage fin DIN 960

DIN 960 bolts are metric fine thread hex bolts, usually specified when joint control is more important than general-purpose fastening. In bulk production, the most common problem is not the head shape. It is the pitch. A coarse-thread bolt may look similar at receiving, but it will fail the assembly requirement once matched with the nut or tapped hole.

Before issuing a purchase order, confirm the requested pitch against the drawing and the Guide des normes de fixation DIN et ISO. For large quantity programs, the order should also define inspection level, batch marking, packing method, and whether mating nuts or washers are supplied together.

Remarque sur la commande groupée : Fine thread bolts should be checked after coating, not only before surface treatment. Zinc plating, zinc flake, and hot dip galvanizing can affect thread fit in different ways.

Descriptions d'achat courantes

Bulk purchase files often include several bolt families in one program. XZ Fastener can review DIN 960 items together with related product descriptions such as DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts.

Description commune Point de contrôle des commandes groupées
DIN 960 M10 x 1.25 x 50 Class 8.8 zinc plated Confirm fine pitch, thread length, zinc finish, and carton quantity
DIN 960 M16 x 1.5 x 80 Class 10.9 plain Confirm heat treatment, head marking, hardness, and tensile requirement
Fine thread hex bolts with nuts and washers Confirm matched nut pitch, washer hardness, and assembly packing
DIN 960 assorted size bulk order Confirm size list, quantity per size, lot traceability, and pallet marking

For related bulk supply, see XZ Fastener boulons industriels et attaches standards.

Tableau des spécifications détaillées

Article de spécification Options typiques Production Control Point
Norme DIN 960 Confirm against drawing and purchase order before tooling or batch release
Type de filetage Pas métrique fin, filetage partiel Use pitch gauges and go/no-go gauges according to order requirement
Diamètre et longueur Tailles métriques courantes fournies selon la liste des tailles de l'acheteur Measure length under head and confirm thread length tolerance
Classe de force 8.8, 10.9, 12.9 ; autres cours sur demande Control material grade, heat treatment, hardness, and tensile result
Matériel Acier au carbone, acier allié, acier inoxydable A2 ou A4 Confirm material certificate and any required chemical composition report
Terminer Plaine, zingué, oxyde noir, galvanisé à chaud, flocons de zinc Vérifiez l'apparence du revêtement, l'épaisseur requise et l'ajustement du filetage après la finition.
Emballage Cartons en vrac, petites boîtes, palettes d'exportation, étiquette de l'acheteur Confirm carton weight, quantity per box, lot label, and pallet layout

Explication du matériau et de la qualité

Class 8.8 carbon steel is commonly selected for industrial assemblies that require reliable strength without moving into high-load specialty hardware. Class 10.9 and 12.9 are used where higher tensile performance is required, but these grades also need suitable nuts, washers, tightening control, and surface finish selection.

For harsh environments, stainless steel A2 or A4 may be requested. A4 stainless steel is often preferred for coastal, chemical, or wet service conditions. Buyers comparing structural or equipment joints can also review attaches à haute résistance.

Guide de sélection de finition de surface

Terminer Utilisation des commandes groupées
Plaine Indoor assembly, oil protection, or parts needing later treatment
Plaqué zinc Protection générale contre la corrosion avec un aspect propre
Oxyde noir Machinery appearance requirement, usually with oil protection
Galvanisé à chaud Outdoor exposure where thicker coating is needed
Flocon de zinc Controlled corrosion performance with tighter coating management

For finish-sensitive programs, compare available attaches enduites avant d'approuver la production en vrac.

Fabrication et contrôle qualité

In bulk manufacturing, consistency across lots is the real test. A DIN 960 bolt batch must keep the same pitch, head dimension, thread length, grade marking, finish, and packing rule from the first carton to the last pallet.

  1. Review drawing, standard, size list, pitch, grade, finish, and packing requirement.
  2. Confirm raw material and heat treatment route before mass production.
  3. Control forming, threading, and thread length during production checks.
  4. Inspect dimensions, pitch, hardness, surface finish, and nut fit after coating.
  5. Pack by size, lot, carton quantity, and export pallet plan.

For drawings, special lengths, head markings, or matched sets, XZ Fastener can discuss attaches personnalisées selon les exigences de la commande.

Applications

DIN 960 fine thread hex bolts are used where the assembly design calls for a finer pitch, better adjustment, or stronger resistance to loosening than a common coarse-thread joint. Application approval should always follow the buyer drawing or engineering specification.

  • Automotive and transport assemblies using metric fine pitch fasteners
  • Machinery frames, brackets, and equipment housings
  • Flange connections and tapped-hole assemblies with limited engagement
  • Vibration-prone equipment where pitch selection is part of joint design
  • Distributor stock programs requiring controlled labels and repeat supply

Buyers can review wider produits de fixation when combining DIN 960 bolts with nuts, washers, threaded rods, and other project hardware.

Comment obtenir un devis plus rapide

A bulk order quotation is faster when the request is complete. Send one size table instead of separate messages, and identify every pitch clearly. Fine thread bolts should not be quoted from diameter and length alone.

Informations nécessaires Exemple
Liste des tailles M10 x 1.25 x 50, M12 x 1.25 x 60, M16 x 1.5 x 80
Matériau et qualité Acier au carbone Classe 8.8, acier allié Classe 10.9, acier inoxydable A4
Terminer Plaine, zingué, oxyde noir, galvanisé à chaud, flocons de zinc
Quantité Pieces per size, shipment batch, or annual forecast
Emballage Carton en vrac, petite boîte, emballage d'exportation palettisé, étiquette de l'acheteur
Exigences d'inspection Rapport dimensionnel, enregistrement de jauge de filetage, test de dureté, certificat de matériau

Envoyez les dessins, les descriptions d'achat et les exigences d'emballage via contacter XZ Fastener for review.

FAQ

What makes DIN 960 different from standard coarse-thread hex bolts?

DIN 960 fine thread hex bolts use metric fine pitch and are generally supplied with partial thread. They are specified when the joint design requires that finer pitch. They should not be replaced by coarse-thread bolts unless the buyer approves the change.

Can XZ Fastener manufacture DIN 960 bolts for bulk orders?

Yes. DIN 960 bolts can be supplied for bulk orders according to confirmed size list, pitch, strength class, material, finish, packing, and inspection requirements.

Which strength classes are commonly used for DIN 960 bolts?

Common options include 8.8, 10.9, and 12.9 for carbon or alloy steel. Stainless steel A2 and A4 options can be supplied when corrosion resistance is the main requirement.

Can DIN 960 fine thread bolts be hot dip galvanized?

Hot dip galvanized finish can be supplied when specified, but thread fit must be checked carefully because the coating is thicker than standard zinc plating. Matching nuts should be confirmed at the same time.

What inspection items should be checked before shipment?

Typical checks include diameter, length under head, thread pitch, thread fit, head dimensions, grade marking, hardness, finish appearance, coating requirement, quantity, and packing marks.

What should buyers send for a complete quotation?

Send the DIN 960 size list, exact fine pitch, material, strength class, finish, quantity per size, packaging method, required documents, and any mating nut or washer requirement.

Prepare Your DIN 960 Bulk Order Request

For accurate production review, send your DIN 960 fine thread hex bolt size list, finish, quantity, packaging method, and inspection requirements. Include matching nuts, washers, carton labels, pallet marks, and document requirements when the order is part of a larger assembly or project supply package.

Demander un devis
Vues des publications : 368
Rechercher des articles
Articles populaires
Abonnez-vous aux actualités techniques

Connaissances en matière de fixation industrielle · Tendances de l'industrie · Informations techniques

Contactez rapidement un expert métier

XZ Ingénieur commercial

Service en ligne disponible · Réponse dans la minute 1

Bonjour! Bienvenue sur XZ FASTENER. Je m'appelle Aaron, votre ingénieur commercial dédié, et je suis heureux de vous aider.

Afin de vous fournir un devis rapide et précis, veuillez remplir les informations suivantes.

Envoyer

Merci de votre visite !

Veuillez partager votre demande à sales@xzfastener.com

POUR WHATSAPP