acero al carbono varillas roscadas proveedor mayorista
XZ Fastener supplies carbon steel threaded rods for wholesalers, distributors, construction supply companies, pipe support fabricators, and maintenance inventory buyers. As a carbon steel threaded rods wholesale supplier, we support DIN 975, DIN 976, ASTM, metric, and inch thread requirements with practical options for grade, length, finish, carton labels, bundle packing, and pallet loading. Rods can be supplied in standard full lengths or cut-to-length pieces according to order requirement. Buyers can request plain, zinc plated, black oxide, hot dip galvanized, Dacromet, or other finishes with inspection details confirmed before shipment.
Especificaciones rápidas
Lo que los compradores deben saber antes de adquirir acero al carbono varillas roscadas
Plan the wholesale range before ordering
Wholesale threaded rod orders often include several diameters, lengths, grades and finishes in one shipment. Buyers should confirm whether rods are needed in standard full lengths, shorter cut studs, mixed cartons or bundled pallets. When a purchasing list includes rods together with nuts, washers, bolts and anchors, XZ Fastener can help match related productos de fijación for repeat distributor supply.
Check fit, load and packing together
Threaded rods must fit the selected nuts, anchors, coupling nuts and support hardware. Grade, thread pitch, coating thickness and straightness all affect assembly performance. For load-related questions, buyers can review the guide on Capacidad de carga varilla roscada before confirming diameter and grade for construction or industrial use.
Descripciones de compras comunes
Clear purchasing descriptions help XZ Fastener check stock planning, production route, coating, packing and shipment cost more quickly. Common wholesale descriptions include:
- DIN 975 carbon steel threaded rods, M8 x 1000 mm, class 4.8, zinc plated, bundle packing.
- DIN 976 cut threaded rods, M12 x 300 mm, grade 8.8, black oxide, chamfered ends.
- ASTM B7 threaded rods, UNC thread, hot dip galvanized, matched nuts required.
- Metric full thread rods, M16 x 2000 mm, yellow zinc plated, private label cartons.
- Mixed wholesale order with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts and metric hex head bolts.
- Coated fastener list including zinc plated DIN 933 bolts, black oxide DIN 933 bolts and hot dip galvanized DIN 933 bolts.
For special lengths, private labels, non-standard thread pitch or drawing-based threaded parts, XZ Fastener can review sujetadores personalizados Según el requisito del pedido.
Tabla de especificaciones detalladas
| Artículo | Especificaciones disponibles | Notas del comprador mayorista |
|---|---|---|
| tipo de producto | Varillas totalmente roscado, espárragos roscados cortados, barras roscadas y especiales varillas roscadas | Confirm whether goods are supplied as long rods, cut pieces or mixed length packages. |
| Estándar | DIN 975, DIN 976, ASTM A307, ASTM A193 B7, ISO, JIS o dibujo del cliente | La selección estándar afecta la tolerancia de la rosca, el grado del material y el hardware correspondiente. |
| Rango de diámetro | Tamaños métricos comunes desde M6 a M36; tamaños inch disponibles bajo petición | Distributors often combine fast-moving sizes with project-specific diameters. |
| Rango de longitud | 1 m, 2 m, 3 m, 6 pies, 12 pies o longitud de corte según el requisito del pedido | Long rods should be bundled carefully to reduce bending during transport and storage. |
| Tipo de hilo | Métrico grueso, métrico fino, UNC, UNF o paso especial | Proporcione siempre el paso de rosca cuando el requisito no sea el estándar rosca gruesa. |
| Materiales | Bajo acero al carbono, medio acero al carbono o acero aleado | Material is selected according to mechanical grade and application environment. |
| clase de fuerza | 4.8, 5.8, 8.8, 10.9, B7 y otros grados de proyecto | Las varillas de mayor resistencia pueden requerir tratamiento térmico y registros de pruebas mecánicas. |
| terminar | Liso, zincado, zinc amarillo, óxido negro, fosfato, HDG, Dacromet, Geomet | El espesor del recubrimiento puede afectar el ajuste de la rosca, la coincidencia de las tuercas y el torque de montaje. |
| Embalaje | Bundles, cartons, wooden cases, pallets or customized wholesale packing | Private labels, barcode labels and itemized carton marks can be discussed. |
| Inspección | Comprobaciones de dimensiones, calibre de rosca, rectitud, dureza, tracción y revestimiento. | Photos, test reports and third-party inspection can be arranged according to order requirement. |
Explicación de materiales y grados
Carbon steel threaded rods are commonly selected for wholesale stock because they provide practical strength, wide availability and flexible surface treatment options. Class 4.8 and 5.8 rods are often used for general fixing and support work. Grade 8.8, 10.9 or B7 may be selected for heavier mechanical assemblies, structural supports or project requirements where higher tensile strength is specified.
Grade selection should be reviewed together with nut grade, thread engagement, coating, installation method and working environment. A stronger rod is not always a direct replacement if the mating parts or installation torque are not matched. XZ Fastener’s Guía de grados de resistencia varilla roscada gives buyers a practical comparison of 4.8, 8.8, B7 and stainless steel options.
Guía de selección de acabado superficial
| terminar | Uso típico | Consideración de compra al por mayor |
|---|---|---|
| Liso o aceitado | Indoor use, further processing or short-term storage | Lower corrosion resistance; moisture control is important for inventory storage. |
| zincado | Reparación general de construcción, instalación de equipos e inventario de distribuidores. | Common for standard wholesale cartons where appearance and cost matter. |
| Amarillo zincado | Hardware visible, stock de repuestos y montaje general. | Confirm color requirement and local environmental restrictions before ordering. |
| óxido negro | Indoor machinery, black hardware sets and low-reflection assemblies | Generalmente requiere protección contra el aceite y no se prefiere para la exposición al aire libre. |
| galvanizado en caliente | Outdoor construction, utility projects and steel structures | Thread fit, coating thickness and matching nut requirements should be checked. |
| Dacromet o Geomet | Mayor resistencia a la corrosión con espesor de recubrimiento controlado | Disponibles bajo pedido para especificaciones de proyecto y ensamblajes especiales. |
For buyers comparing coating choices across rods, bolts, studs, nuts and washers, XZ Fastener provides a practical guía de revestimiento de sujetadores.
Manufactura y Control de Calidad
Carbon steel threaded rods can be produced by thread rolling, thread cutting or a combined process depending on diameter, material grade, length and quantity. A typical supply process includes raw material preparation, straightening, cutting, threading, heat treatment when required, surface finishing, thread cleaning, inspection, labeling and packing. Cut-to-length rods can be chamfered or deburred according to order requirement.
Quality control may include diameter checking, length tolerance, straightness inspection, thread gauge testing, surface appearance, hardness, tensile strength, coating thickness and packing verification. For buyers reviewing how threads are formed, the guía del proceso de laminado de hilo explains important production points for bolts, screws, studs and rods.
Aplicaciones
Carbon steel threaded rods are used where adjustable connection length, full thread engagement and convenient site cutting are needed. Common wholesale applications include:
- Colgadores de tuberías, soportes HVAC, bandejas portacables y sistemas de instalación suspendidos.
- Anclaje de obra, encofrado, fijación empotrada y uniones de placa base.
- Arriostramiento de estructura de acero, conjuntos espaciadores, tirantes y ajuste de marco.
- Montaje de maquinaria, alineación de equipos y reparación de mantenimiento industrial.
- Distributor stock for resale, cutting service, local fabrication and project supply.
Wholesale buyers building a broader inventory can use XZ Fastener’s guide on cómo crear una lista de existencias de sujetadores to organize common sizes, grades and finishes.
Cómo obtener una cotización más rápida
A complete inquiry helps XZ Fastener check size mix, production route, coating, packing and shipment preparation quickly. For carbon steel threaded rod wholesale orders, please include:
- Diámetro, longitud, paso de rosca y cantidad para cada medida.
- Estándar requerido como DIN 975, DIN 976, ASTM, ISO o especificación basada en dibujos.
- Material y clase de resistencia como 4.8, 8.8, 10.9 o B7.
- Requisito de acabado, incluido el espesor del recubrimiento o la expectativa de niebla salina cuando se especifique.
- Requisitos especiales de corte, biselado, desbarbado o procesamiento final.
- Packaging method, carton labels, barcode labels, bundle weight and pallet requirement.
- Documentos de inspección, informes de pruebas, fotografías previas al envío o necesidades de inspección de terceros.
Envíe dibujos, fotografías de muestra o una lista de tamaños de Excel a través del solicitar una cotización page. For urgent replenishment or distributor planning, please contacto XZ Fastener with target delivery schedule and destination country.
Preguntas frecuentes
Can XZ Fastener supply carbon steel threaded rods for wholesale stock?
Yes. Carbon steel threaded rods can be supplied for wholesale stock in common diameters, lengths, grades and finishes according to order requirement.
Can threaded rods be packed with private labels or barcode labels?
Yes. Carton labels, barcode labels, shipping marks, bundle labels and pallet packing can be discussed before order confirmation.
Can rods be supplied as both full length and cut-to-length pieces?
Yes. Standard full lengths and cut-to-length rods can be supplied. Chamfering, deburring and special packing can be arranged according to the buyer’s requirement.
Which grades are common for carbon steel threaded rods?
Los grados comunes incluyen 4.8, 5.8, 8.8, 10.9 y B7. El grado correcto depende de los requisitos de carga, la coincidencia de tuercas, el recubrimiento y las condiciones de instalación.
What finish should wholesale buyers choose for outdoor use?
Se pueden considerar galvanizado en caliente, Dacromet, Geomet u otros acabados resistentes a la corrosión para uso en exteriores. Los requisitos de ajuste de rosca y tuercas coincidentes deben verificarse antes de realizar el pedido.
¿Qué información se necesita para una cotización mayorista más rápida?
Please send the size list, standard, grade, material, finish, quantity, packaging and inspection requirements. Drawings or photos are useful for custom lengths or special threads.
Send Your Threaded Rod Wholesale Inquiry
For a practical quotation, send XZ Fastener your size list, finish, quantity, packaging plan and inspection requirements. Please include the standard, material grade, thread pitch, rod length, label needs, bundle weight, pallet requirement and destination country when available.
Solicitar una cotización
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文