T-bolts are common in machine tools, aluminum profile systems, fixtures, clamps, and adjustable equipment frames. They are useful because the head can slide into a T-slot and lock in place when tightened.

The buying mistake I see most often is simple: buyers only specify the thread size, such as “M10 T-bolt.” That is not enough. For T-bolts, the head dimensions are just as important as the thread.

If the head is too wide, it will not enter the slot. If it is too narrow, it may pull out under load. If the head height is wrong, the bolt may not seat correctly.

Key T-Bolt Dimensions to Confirm

T-bolt dimensions should be checked against the machine slot, rail profile, fixture design, or drawing.

For standard bolt sourcing, buyers can review available baut before deciding whether a catalog part or custom part is needed.

Standard T-Bolts vs Custom T-Bolts

Some T-bolts follow common standards, such as DIN-style machine tool T-slot bolts. Others are made to drawing for aluminum profiles, special clamps, or equipment fixtures.

If the slot design is not standard, use pengencang non-standar khusus and provide a drawing or sample.

Material and Finish Selection

T-bolts are commonly supplied in carbon steel, alloy steel, or stainless steel. Material choice depends on load and environment.

For heavy clamping or load-sensitive applications, review pengencang berkekuatan tinggi. For outdoor or corrosive service, compare pengencang berlapis atau pengencang baja tahan karat.

RFQ Checklist for T-Bolts

Sebelum meminta penawaran, berikan:

1. Ukuran dan nada benang
2. Panjang keseluruhan dan panjang benang
3. Head width, head length, and head height
4. Neck width and neck height
5. Kelas bahan dan kekuatan
6. Permukaan akhir
7. Slot drawing or profile drawing
8. Quantity and packaging requirement

Saran Terakhir

For T-bolts, thread size is only half the specification. The head must match the slot. The length must match the clamping stack. The material and finish must match the working condition.

A clear T-bolt RFQ should include both thread dimensions and head dimensions. That is the simplest way to avoid poor fit, weak clamping, and delays during machinery assembly.