XZ Fastener | Глобальный производитель

ru_RU Русский
ru_RU Русский en_US English es_ES Español vi Tiếng Việt ar العربية

XZ INSIGHTS

Промышленные крепежные знания · Отраслевые тенденции · Технические идеи

DIN 914 cone point set screws wholesale supplier

Фейсбук
X
LinkedIn
Реддит
WhatsApp
Электронная почта

Содержание

DIN 914 cone point set screws wholesale supplier

XZ Fastener supplies DIN 914 cone point set screws for wholesale buyers, distributors, and machinery assembly suppliers that need headless socket fasteners with precise point seating and practical carton packing. These screws are used when the point must locate or bite into a mating part with a sharper contact than flat or cup point styles, including collars, shafts, stops, fixtures, knobs, adjustment blocks, and machinery positioning parts. Material, strength class, finish, thread size, socket details, small box packing, carton marks, pallet method, and inspection documents can be supplied according to order requirement. Buyers comparing related fastener products can send one complete purchasing list.

DIN 914 Cone Point Hex Socket Wholesale Supply
DIN 914 cone point set screws wholesale supplier product illustration

Quick Specs

СтандартDIN 914 cone point set screws, hex socket, headless design
StrengthCommon alloy steel class 45H; stainless options by order
МатериалAlloy steel, carbon steel, stainless steel A2 or A4
FinishBlack oxide, zinc plated, plain, stainless passivated, or other finish by request
ПриложениеPositioning, shaft locking, collars, stops, fixtures, knobs, and locating assemblies

What Buyers Should Know Before Sourcing DIN 914 Cone Point Set Screws

DIN 914 set screws use a cone point that creates a concentrated contact area. Compared with a flat point set screw, the cone point can locate more positively in a drilled seat, groove, or softer mating surface. Compared with a cup point, it may create a sharper indentation. If your engineering team compares DIN and ISO references, the DIN and ISO fastener standards guide can help clarify standard naming and drawing references.

For wholesale supply, buyers should confirm whether the cone point will seat into a prepared dimple, mark a shaft directly, or act as an adjustment stop. XZ Fastener can review DIN 914 screws together with related high-strength fasteners when assemblies require consistent strength, socket performance, and material control.

Common Purchasing Descriptions

  • DIN 914 cone point set screws, hex socket, alloy steel 45H, black oxide, wholesale packing.
  • DIN 914 socket set screws, cone point, metric thread, small box or bulk carton packing.
  • Stainless steel DIN 914 grub screws, A2 or A4, for corrosion-resistant assemblies.
  • Zinc plated DIN 914 cone point set screws for general industrial positioning applications.
  • Combined wholesale lists may also include DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts.

Detailed Specifications Table

Предмет Typical Supply Detail Wholesale Purchasing Notes
Стандарт DIN 914 Confirm cone point set screw requirement against the drawing or assembly list.
Head Style Headless set screw Suitable where the fastener must sit inside a tapped hole without a projecting head.
Drive Internal hex socket Socket size and depth affect tightening torque and tool engagement.
Тип точки Cone point Designed for positive locating, sharper point seating, and strong contact pressure.
Thread Metric full thread Check thread pitch and tolerance when used with precision machined parts.
Диапазон размеров Common metric sizes such as M3 to M20 Actual range depends on material, finish, and order quantity.
Материал Alloy steel, carbon steel, stainless steel Alloy steel is common for higher strength; stainless steel is used for corrosion resistance.
Обработка поверхности Black oxide, zinc plated, plain, stainless passivated options Finish should match storage conditions, installation environment, and appearance needs.
Packing Bulk carton, inner bag, small box, pallet packing Wholesale orders need clear size labels, carton quantities, and pallet marks.
Inspection Thread, socket, cone point, hardness, finish, and packing checks Inspection documents are available upon request before delivery arrangement.

Material and Grade Explanation

Alloy steel DIN 914 cone point set screws are commonly supplied in class 45H when assemblies require strong point seating and reliable socket performance. This option is often used in mechanical stops, collars, shaft locating parts, fixtures, adjustment blocks, and compact machinery assemblies.

Stainless steel A2 is often selected for indoor equipment and mildly humid environments. A4 stainless steel may be considered where corrosion exposure is higher. When the wholesale order includes mating components, XZ Fastener can also review compatible industrial nuts and flat washers for the same purchasing plan.

Surface Finish Selection Guide

Black oxide is widely used for alloy steel DIN 914 set screws because it is common in machinery assemblies and provides a dark surface. Zinc plating may be selected for general industrial use where basic corrosion protection is required. Plain finish may be used when the buyer has a post-treatment process or controlled indoor storage.

For humid, outdoor, or chemical environments, stainless steel may be more suitable than coated carbon steel or alloy steel. If a shipment includes set screws, bolts, nuts, and washers, XZ Fastener can review related coated fasteners to keep finish requirements consistent across the order.

Manufacturing and Quality Control

DIN 914 cone point set screws require careful control of thread rolling, socket forming, cone point geometry, heat treatment when required, surface finish, and packing. The cone point must be concentric and clean because an uneven point can shift seating, damage a mating part, or reduce repeatability. For wholesale supply, label accuracy and lot separation help reduce receiving issues at distributor warehouses.

Common Control Points

  1. Confirm DIN 914 standard, diameter, length, thread pitch, socket size, and cone point requirement.
  2. Check socket depth and hex engagement to reduce tool stripping during installation.
  3. Review cone point angle, point tip condition, and concentricity for stable contact.
  4. Verify hardness or material requirement when higher tightening force is required.
  5. Separate cartons by size, material, finish, lot number, customer item code, and pallet number.

For special point form, unusual length, private packing, or drawing-based parts, buyers can review custom fasteners and send drawings for feasibility checking.

Приложения

Application Area Why DIN 914 Is Used Procurement Note
Shaft locating Cone point can seat into a dimple or softer surface for positive location. Confirm whether shaft marking is acceptable.
Mechanical stops Pointed contact supports repeatable stopping and positioning. Check point angle and mating material hardness.
Collars and knobs Headless design holds parts without an external bolt head. Review tightening torque and socket engagement.
Fixtures and tooling Useful for locating, locking, and pressure adjustment in compact tooling. Confirm hardness and finish before production.
Machinery adjustment parts Small headless design supports compact assemblies and repeatable point contact. Define inspection needs if point geometry is critical.

How to Get a Faster Quotation

A complete wholesale inquiry helps XZ Fastener confirm material, cone point form, thread requirement, finish, packing, and delivery details more efficiently. Please include the standard, diameter, length, material, strength class, finish, quantity, carton quantity, destination, and any inspection document request.

  • Example: DIN 914, M6 x 12, alloy steel 45H, cone point, black oxide.
  • Confirm whether the screw is used for locating, locking, adjustment, a collar, or a fixture.
  • Send drawings when socket depth, cone point geometry, thread tolerance, or hardness is controlled.
  • Provide small box details, carton marks, pallet requirements, inspection needs, and any split-size packing request.

For wholesale order review, buyers can contact XZ Fastener with the size list, finish, quantity, packaging, and inspection requirements.

Часто задаваемые вопросы

What is a DIN 914 cone point set screw used for?

It is used for locating, locking, adjustment, and positioning in parts such as collars, stops, fixtures, knobs, shafts, and machinery assemblies where a pointed contact is required.

How is DIN 914 different from DIN 913 and DIN 916?

DIN 914 has a cone point, DIN 913 has a flat point, and DIN 916 has a cup point. The correct choice depends on whether the application needs sharp locating, flat pressure contact, or stronger surface bite.

What material is common for DIN 914 set screws?

Alloy steel class 45H is common for higher strength. Carbon steel and stainless steel A2 or A4 options can also be reviewed according to order requirement.

Is black oxide suitable for DIN 914 cone point set screws?

Black oxide is widely used for alloy steel set screws in indoor machinery applications. For humid or corrosive environments, stainless steel or another finish should be considered.

What information is needed for a wholesale DIN 914 quotation?

Please provide diameter, length, material, strength class, finish, quantity, packing method, destination, and inspection requirements. A drawing is helpful when socket depth or cone point geometry is controlled.

Can DIN 914 set screws be supplied in small boxes?

Yes. Small box packing, inner bag packing, bulk carton packing, neutral labels, and pallet marks can be discussed according to order requirement.

Request Wholesale Supply for DIN 914 Cone Point Set Screws

Send your size list, finish, quantity, packaging method, and inspection requirements. XZ Fastener can review DIN 914 cone point set screws together with related fasteners and provide wholesale supply details according to order requirement.

Запросить цитату
Просмотров: 0
Искать статьи
Популярные статьи
Подписаться на технические новости

Промышленные крепежные знания · Отраслевые тенденции · Технические идеи

Быстро свяжитесь с бизнес-экспертом

Инженер по продажам XZ

Онлайн-сервис доступен · Ответ в течение 1 минуты

Здравствуйте! Добро пожаловать в XZ FASTENER. Меня зовут Аарон, я ваш персональный инженер по продажам, и я рад вам помочь.

Чтобы предоставить вам быструю и точную цитату, пожалуйста, заполните следующую информацию.

Отправить

Thank you for visiting!

Kindly share your inquiry to sales@xzfastener.com

FOR WHATSAPP