formwork tie rods supplier China
XZ Fastener supplies formwork tie rods from China for concrete formwork systems, wall formwork, column formwork, slab supports, water stop assemblies, wing nut connections and reusable construction hardware. These rods must provide consistent tensile performance, accurate thread engagement and practical surface protection for repeated site use. Tie rods, nuts, washers, plates and related fastening parts can be supplied according to DIN, ISO, ASTM, EN, GB, buyer samples or drawings, with material grade, length, thread type, finish, packing and inspection requirements confirmed before production. XZ Fastener supports project lists, mixed lengths and export packaging for contractors and distributors.
Запросить цитату
Quick Specs
What Buyers Should Know Before Sourcing Formwork Tie Rods
Formwork tie rods must hold form panels in position while concrete pressure is applied, so the purchasing description should be more detailed than diameter and length only. Buyers should confirm thread profile, usable threaded length, tensile requirement, compatible wing nuts, water stops, plates and cones before placing an order. XZ Fastener supplies a broad range of fastener products that can be matched to construction hardware lists and formwork assembly drawings.
Concrete formwork projects may use different tie rod systems for walls, columns, beams, tunnel forms and reusable panels. If the order is part of a larger construction package, buyers can review XZ Fastener’s guide to fasteners for construction projects when preparing the complete bill of materials.
Common Purchasing Descriptions
- Formwork tie rods with wing nuts and washer plates
- High tensile concrete form tie rods cut to project length
- Reusable formwork threaded rods for wall and column panels
- Form tie rod assemblies with water stops, cones and nuts
- Custom formwork rods supplied according to drawing or sample
- DIN 933 full thread hex bolts for related formwork fastening kits
- Grade 8.8 carbon steel hex bolts for higher strength construction assemblies
- metric hex head bolts packed together with tie rod accessories
- zinc plated DIN 933 bolts, black oxide DIN 933 bolts and hot dip galvanized DIN 933 bolts
For buyers who need threaded rod variants beyond standard formwork sizes, XZ Fastener can support custom threaded rods according to confirmed drawings, samples or project specifications.
Detailed Specifications Table
| Предмет | Доступные варианты | Procurement Notes |
|---|---|---|
| Тип продукта | Formwork tie rods, fully threaded rods, water stop tie rods, tie rod assemblies, nuts, plates, cones | Can be supplied as single rods or matched assemblies according to order requirement. |
| Диапазон размеров | Metric sizes and project lengths available upon request | Please provide diameter, total length, thread length, pitch and quantity by size. |
| Тип резьбы | Metric thread, rolled thread, cut thread, coarse thread, special formwork thread | Thread profile should match wing nuts and reusable accessories already used on site. |
| Strength | 4.8, 8.8, B7, high tensile grades, stainless options | Tensile capacity should be confirmed against formwork pressure and panel spacing. |
| Материал | Carbon steel, alloy steel, stainless steel | Carbon steel is common for construction formwork; stainless steel may be used for corrosive environments. |
| Обработка поверхности | Plain, zinc plated, yellow zinc, black oxide, hot dip galvanized, Dacromet, Geomet | Finish should consider outdoor storage, reuse frequency, thread fit and concrete site exposure. |
| Packing | Bundles, cartons, bags, pallets, project kits, buyer label | Long rods can be bundled by length; accessories can be packed separately or as matched sets. |
| Inspection | Dimension, thread fit, straightness, tensile test, hardness, coating thickness, assembly check | Inspection documents are available upon request before order confirmation. |
Material and Grade Explanation
Formwork tie rods are commonly supplied in carbon steel or alloy steel because these materials provide practical tensile strength and stable threading performance. The selected grade should be based on panel spacing, concrete pressure, reuse cycle and the approved formwork design. For higher load requirements, buyers should confirm tensile capacity, elongation, thread engagement and nut compatibility before bulk production.
When load capacity is a key purchasing concern, review XZ Fastener’s guide to threaded rod load capacity and confirm the safety factor with the project engineer. Custom lengths, special threads and matched accessories can be supplied according to order requirement.
Surface Finish Selection Guide
Plain formwork tie rods may be selected for short-term use, controlled storage or applications where the rods are cleaned and reused quickly. Zinc plated rods offer a cleaner appearance and light corrosion protection. Hot dip galvanized rods may be considered for outdoor storage, humid jobsites or longer exposure, but thread fit with wing nuts and plates should be checked after coating.
Black oxide is mainly used where dark appearance and light oil protection are required; it is not a heavy corrosion solution. Dacromet and Geomet coatings can be supplied for specific corrosion or assembly requirements. Buyers comparing coatings can review the surface finish selection guide before confirming the final order description.
Manufacturing and Quality Control
Formwork tie rod supply may include raw material verification, cutting, straightening, chamfering, thread rolling or thread cutting, heat treatment when required, surface treatment, dimensional inspection, thread fit checking and packing review. For long rods and mixed-length construction orders, straightness, thread consistency and clear length labels are important for site handling.
Inspection can be arranged according to order requirement, including dimensional reports, tensile testing, hardness checks, thread fit checks, coating thickness checks and sample approval. Buyers who need material and grade traceability can review test certificate requirements, while production control details are explained in XZ Fastener’s guide to fastener quality control during manufacturing.
Приложения
Concrete Formwork Systems
Formwork tie rods are used for wall formwork, column formwork, beam molds, slab edge forms, tunnel forms, bridge formwork and reusable panel systems.
Construction Hardware Supply
Tie rods, wing nuts, plates and related fasteners can be supplied for contractors, formwork rental companies, precast plants, infrastructure projects and construction hardware distributors.
How to Get a Faster Quotation
A complete inquiry helps XZ Fastener confirm material, thread, finish, packing and inspection scope. Please include:
- Rod diameter, total length, thread length and thread pitch
- Thread profile or compatible nut sample information
- Material grade, tensile requirement and surface finish
- Quantity by length and expected delivery schedule
- Matching nuts, plates, cones, water stops or other accessories
- Packaging method, label requirement and inspection documents
Часто задаваемые вопросы
Can XZ Fastener supply formwork tie rods from China according to drawings?
Yes. Formwork tie rods can be supplied according to drawings, samples or confirmed technical descriptions. Please provide diameter, length, thread profile, material, finish and quantity.
Can formwork tie rods be supplied with wing nuts and plates?
Yes. Tie rods can be supplied with matching wing nuts, washer plates, cones, water stops and related accessories according to order requirement.
Which finish is suitable for reusable formwork tie rods?
Zinc plated, hot dip galvanized, Dacromet or Geomet finishes may be considered depending on jobsite exposure, storage condition, reuse cycle and buyer specification.
What information is needed for tie rod tensile requirements?
Please provide required tensile load, material grade, thread size, panel spacing or approved project drawing so the rod specification can be reviewed correctly.
Can mixed lengths be packed for construction projects?
Yes. Mixed lengths can be bundled or packed by size, label, project section or installation sequence according to buyer requirement.
Do you provide inspection documents for formwork tie rods?
Inspection documents such as dimensional checks, tensile test reports, hardness checks and coating reports can be prepared when required by the order.
Send Your Formwork Tie Rod Inquiry
To receive a faster quotation, send your size list, finish, quantity, packaging method and inspection requirements. Drawings, samples, current purchase descriptions or photos of existing formwork tie rods are helpful for confirming the correct specification before production.
English 
Español 
Tiếng Việt 
Русский 
العربية