Tiếng Việt 
English 
Español 
Русский 
العربية DIN 127 spring lock washers supplier
XZ Fastener supplies DIN 127 spring lock washers for machinery, equipment assembly, maintenance kits, brackets, and general industrial fastening. These split helical washers are designed to provide spring action under a nut or bolt head and are often used where a simple anti-loosening aid is required. Carbon spring steel, stainless steel, and other materials can be supplied according to order requirement, with plain, zinc plated, black oxide, phosphate, hot dip galvanized, and other finishes available upon request. Buyers often combine DIN 127 washers with DIN 933 full thread hex bolts, DIN 934 nuts, and flat washers.
Quick Specs
What Buyers Should Know Before Sourcing DIN 127 Spring Lock Washers
DIN 127 spring lock washers are commonly used under a nut or bolt head to add spring tension and help resist loosening in light to moderate assemblies. They are not a replacement for correct preload, proper torque, thread engagement, or engineered locking methods in critical vibration applications.
Before ordering, buyers should confirm washer size, form, material, hardness, finish, and whether the mating surface can accept the washer edge. In assemblies using metric hex head bolts, flat washers, and nuts, the washer sequence should be clearly defined. The XZ Fastener bolt, nut, and washer size matching guide can help purchasing teams prepare a complete size list.
Key Purchase Checks
- Confirm DIN 127 size, washer form, material, and finish.
- Check whether spring lock washers are suitable for the joint condition.
- Review bolt grade, nut grade, torque target, and washer sequence together.
- Confirm coating thickness where washers are used with plated or galvanized fasteners.
- Define carton weight, small box packing, palletizing, and buyer label requirements.
Common Purchasing Descriptions
- DIN 127 spring lock washers, carbon steel, zinc plated, M6 to M24
- DIN 127 split lock washers, black oxide, for machinery assembly
- DIN 127 stainless steel spring washers, A2 or A4, plain finish
- Metric spring lock washers for bolt and nut assembly kits
- DIN 127 washers matched with Grade 8.8 carbon steel hex bolts
- Spring lock washers for metric hex head bolts and DIN 934 nuts
- Hot dip galvanized lock washers for outdoor steel structure fastening
- Custom packing for maintenance kits, distributor stock, and project orders
For mixed order planning, buyers can review XZ Fastener fastener products to combine spring washers with bolts, nuts, flat washers, threaded rods, anchors, and custom fasteners.
Detailed Specifications Table
| Item | Available Specification | Buyer Notes |
|---|---|---|
| Product Name | DIN 127 spring lock washers, split lock washers, helical spring washers | Used as a simple anti-loosening aid in suitable bolted assemblies. |
| Size Range | Common metric sizes such as M3, M4, M5, M6, M8, M10, M12, M16, M20, M24 and larger sizes upon request | Send nominal size and mating bolt size when preparing an inquiry. |
| Material | Carbon spring steel, stainless steel A2/A4, alloy steel | Material affects spring behavior, corrosion resistance, and cost. |
| Spring Performance | Elasticity and hardness according to material, heat treatment, and order requirement | For load-sensitive assemblies, confirm whether a spring washer is acceptable in the project specification. |
| Finish | Plain, zinc plated, yellow zinc, black oxide, phosphate, hot dip galvanized, Dacromet-type coating | Coating should be selected together with bolt and nut finish. |
| Manufacturing | Forming, cutting, heat treatment, surface treatment, sorting, packing | Heat treatment and edge quality influence spring behavior and assembly consistency. |
| Packing | Bulk carton, small box, polybag, woven bag, pallet packing, buyer label | Customized packing can be supplied according to order requirement. |
| Inspection | Dimension, hardness, spring form, opening, burr, surface finish, coating thickness | Inspection reports and third-party inspection can be discussed before order confirmation. |
Material and Grade Explanation
Carbon spring steel is a common choice for DIN 127 spring lock washers because it can provide the elastic behavior expected from a split helical washer after proper forming and heat treatment. Stainless steel A2 and A4 options are selected when corrosion resistance is more important, such as outdoor equipment, damp environments, or appearance-sensitive assemblies.
When DIN 127 washers are used with Grade 8.8 carbon steel hex bolts, buyers should confirm that the washer material, hardness, and surface finish are suitable for the tightening method. Spring lock washers are often used with zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts, but coating compatibility and assembly torque should be reviewed together.
Assembly Performance Notes
- Spring washers help maintain tension only within a suitable working range.
- They should not be the only control method in critical vibration joints.
- Soft mating surfaces can be marked by washer edges during tightening.
- For important assemblies, preload strategy should be reviewed with the full bolt, nut, and washer set.
For technical background, review XZ Fastener guidance on lock nuts, washers, and preload.
Surface Finish Selection Guide
Zinc Plated
Zinc plated DIN 127 spring lock washers are widely used for indoor machinery, equipment, maintenance kits, and general industrial fastening. White zinc and yellow zinc can be discussed by order.
Black Oxide or Phosphate
Black oxide and phosphate finishes are often selected for machinery, fixtures, and appearance-controlled assemblies. Oil or additional corrosion protection may be required during storage.
Hot Dip Galvanized
Hot dip galvanized spring lock washers may be requested for outdoor fastener sets. Buyers should confirm coating thickness, washer function, and fit with galvanized bolts and nuts.
For coating comparison across bolts, nuts, and washers, review the XZ Fastener fastener coating guide.
Manufacturing and Quality Control
DIN 127 spring lock washer production requires control of forming accuracy, washer opening, section profile, inner diameter, outer diameter, spring height, edge condition, hardness, coating appearance, and final packing. Heat treatment is important for carbon spring steel washers because it affects elasticity and service behavior.
Quality checks can include material verification, dimensional inspection, hardness testing, spring form review, burr inspection, coating thickness testing, and final visual sorting. For broader washer sourcing guidance, buyers can review when split lock washers are suitable for industrial use.
Applications
- Machinery assembly, equipment maintenance, and repair kits
- Brackets, guards, covers, metal frames, and mounting rails
- General industrial bolt-and-nut assemblies requiring a simple locking aid
- Electrical cabinets, light steel fabrication, and non-critical service connections
- Assemblies using metric hex head bolts, DIN 934 nuts, and flat washers
- Distributor stock programs covering common metric spring washer sizes
- Maintenance kits with Grade 8.8 carbon steel hex bolts and matching nuts
- Custom fastener packages supplied according to project size lists and packing needs
For a broader comparison of washer functions, buyers can review flat, spring, and lock washer uses.
How to Get a Faster Quotation
To receive a faster quotation for DIN 127 spring lock washers, send the standard, nominal size, material, finish, quantity per size, packaging method, delivery destination, and inspection requirement. If the washer must match an existing bolt and nut assembly, include the bolt standard, bolt grade, nut standard, finish, and torque method. Drawings or samples are useful when washer form, spring height, or coating requirement is controlled.
Send the complete washer list through the request a quote page together with related bolts, nuts, flat washers, threaded rods, anchors, and packing requirements.
FAQ
What is the main function of DIN 127 spring lock washers?
DIN 127 spring lock washers provide spring action under a bolt head or nut and are used as a simple anti-loosening aid in suitable light to moderate assemblies.
Can spring lock washers replace correct bolt preload?
No. Spring lock washers should not replace correct preload, proper torque, thread engagement, or engineered locking methods in critical joints. The full assembly design should be reviewed.
Which materials can be supplied for DIN 127 washers?
DIN 127 washers can be supplied in carbon spring steel, stainless steel A2/A4, alloy steel, and other materials according to order requirement. Material choice affects spring behavior, corrosion resistance, and cost.
Can DIN 127 spring washers be supplied in zinc plated, black oxide, and hot dip galvanized finishes?
Yes. DIN 127 spring lock washers can be supplied in zinc plated, yellow zinc, black oxide, phosphate, hot dip galvanized, Dacromet-type coating, and other finishes upon request.
Can spring lock washers be packed together with bolts and nuts?
Yes. DIN 127 washers can be quoted together with DIN 933 bolts, DIN 934 nuts, flat washers, threaded rods, anchors, and other fasteners. Please provide the size ratio and packing method for each set.
What information is needed for a DIN 127 spring lock washer quotation?
Please provide standard, nominal size, material, finish, quantity, packaging method, destination, and inspection requirements. For special forms or controlled spring height, send a drawing or sample photo.
Send Your DIN 127 Spring Lock Washer Inquiry
For a faster and more accurate offer, send your size list, finish, quantity, packaging method, and inspection requirements. XZ Fastener can quote DIN 127 spring lock washers together with matching bolts, nuts, flat washers, threaded rods, and related fastener products according to your purchasing plan.
Send Size List and Requirements