Foundation Anchor Bolts for Project and Bulk Supply
ASTM F1554地脚螺栓工厂
XZ Fastener manufactures ASTM F1554 anchor bolts for foundations, base plates, steel columns, equipment supports, light poles, bridge components, and other concrete anchoring projects. As an ASTM F1554 anchor bolts factory, we can supply Grade 36, Grade 55, and Grade 105 options according to drawing and project requirements, including straight anchor rods, L-shaped anchors, headed anchors, and threaded assemblies with nuts and washers. Plain, zinc plated, black oxide, and hot dip galvanized finishes are available upon request. For bulk orders, please confirm diameter, length, thread length, bend shape, finish, quantity, packaging, and inspection requirements before production.
快速规格
买家在采购ASTM F1554 锚栓之前应了解什么
ASTM F1554 anchor bolts are not ordinary threaded rods. They are foundation anchoring components where grade, embedment shape, thread length, nut and washer compatibility, coating, and inspection documents must match the project drawing. XZ Fastener supplies related 工业锚 for concrete and steel structure projects, including straight anchor rods, bent anchor bolts, and custom anchoring parts.
Before comparing prices, buyers should confirm whether the required item is Grade 36, Grade 55, or Grade 105, and whether the anchor is straight, L-shaped, J-shaped, headed, fully threaded, or partially threaded. For mixed project packages that include bolts, nuts, washers, and threaded parts, buyers can review XZ Fastener’s 紧固件产品 and send a consolidated size list.
Critical RFQ Details
- ASTM F1554 级：36、55 或 105。
- 直径、总长度、螺纹长度和螺纹系列。
- Anchor shape: straight, L-bolt, J-bolt, headed, or drawing-based.
- Nut and washer standard, grade, and finish.
- Finish requirement and corrosion exposure.
- Inspection documents, packing, labels, and delivery schedule.
常见采购说明
Procurement descriptions for ASTM F1554 anchor bolts vary by project type. Clear wording helps avoid mismatched grade, shape, thread length, and coating.
- ASTM F1554 级 36 地脚螺栓，光面，带螺母和垫圈。
- ASTM F1554 Grade 55 hot dip galvanized L anchor bolts for steel column base plates.
- ASTM F1554 Grade 105 straight anchor rods, fully threaded ends, with heavy hex nuts.
- Custom foundation anchor bolts made according to drawing and packing requirement.
- Galvanized anchor bolt assemblies with template, nuts, and washers available upon request.
For distributor or project purchasing lists, ASTM F1554 anchor bolts may be ordered together with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts. XZ Fastener can review these combined lists through its 定制紧固件 service when non-standard lengths, bend shapes, or special labels are required.
详细规格表
| 项目 | 典型选项 | 买家须知 |
|---|---|---|
| 产品名称 | ASTM F1554地脚螺栓 | Used for anchoring structural supports and equipment to concrete foundations. |
| Grade | 36 级、55 级、105 级 | Grade must follow project drawing, specification, and required mechanical properties. |
| Common Shapes | Straight rods, L-bolts, J-bolts, headed anchor bolts, drawing-based shapes | Send drawing for bent anchors, special ends, or embedded plate details. |
| 直径 | 英制尺寸根据项目要求 | Confirm nominal diameter and thread series before quotation. |
| 长度 | 标准或定制总长度 | Overall length, embedment length, and exposed thread length should be clearly stated. |
| 线程 | UNC、UNF、全螺纹、部分螺纹、双头螺纹 | Thread length and tolerance affect assembly with nuts and templates. |
| 材质 | Carbon steel or alloy steel according to grade | For related material options, see 碳钢紧固件. |
| 完成 | 普通、镀锌、黑色氧化、热浸镀锌、机械镀锌 | Hot dip galvanized assemblies require attention to nut fit and coating compatibility. |
| 配件 | 螺母、垫圈、模板、套筒或板 | 配件可根据订单要求提供。 |
| 文件 | Inspection report, material statement, coating report, dimensional report | 订单发布前应确认所需文件。 |
| 包装 | 捆包、纸箱、木箱、托盘、贴有标签的组件 | Bulk packing and project labels are available upon request. |
材质及牌号说明
ASTM F1554 Grade 36 is commonly selected for general foundation anchor bolt use where moderate strength is required. Grade 55 is often specified for higher yield strength while still allowing common project fabrication needs. Grade 105 is used where higher strength is required and should be handled carefully in relation to coating, threading, and installation conditions.
Anchor bolt material should be matched with compatible nuts and washers. For hot dip galvanized anchors, buyers should confirm whether galvanized nuts and washers are required and whether oversizing or fit checks are needed. When projects include DIN, ISO, and ASTM items together, the DIN和ISO紧固件标准指南 may help purchasing teams separate dimensional standards from mechanical grades.
Typical Grade Selection
- Grade 36: common foundation and construction anchoring.
- 55 级：用于指定基板项目的更高屈服强度。
- Grade 105: higher strength anchoring where drawings clearly require it.
- Final grade should always follow the engineer’s drawing or purchase specification.
表面处理选择指南
Anchor bolts are often embedded in concrete or exposed near base plates, so coating selection should consider storage time, jobsite exposure, concrete environment, outdoor corrosion, and assembly fit. XZ Fastener can support related 涂层紧固件 when a project requires consistent finishing across bolts, nuts, and washers.
原味或涂油
Suitable for indoor storage, embedded sections, and projects where the buyer applies protective coating after installation.
镀锌
Used for cleaner appearance and light corrosion protection. It is typically chosen for indoor or mild-service environments.
黑色氧化
Often requested for indoor assemblies or temporary protection. Oiling and storage conditions should be confirmed.
热镀锌
Common for outdoor foundations, poles, and exposed base plate assemblies. Nut fit and coating thickness should be reviewed.
机械镀锌
Can be considered for some anchor bolt assemblies when project requirements allow this coating route.
特殊涂料
Zinc-aluminum, Dacromet-type, or project-specific coatings can be reviewed according to drawing and service environment.
制造和质量控制
ASTM F1554 anchor bolt production requires careful control of grade, length, bending shape, thread length, and finish. Typical manufacturing steps include raw material confirmation, cutting, threading, bending or forming, heat or process control when applicable, surface treatment, accessory matching, inspection, marking, and packing.
For project orders, XZ Fastener checks buyer drawings before production and can arrange dimensional inspection for diameter, overall length, bend radius, leg length, thread length, nut fit, coating appearance, and packing labels. Related 标准紧固件 can also be supplied when the anchor bolt package includes bolts, nuts, washers, and threaded rods.
Common Inspection Points
- 等级和材料确认。
- 直径、总长度和螺纹长度测量。
- Bend angle, hook length, and embedded length check.
- 通过和不通过螺纹量规验证。
- Nut assembly fit and washer compatibility.
- Coating appearance and coating thickness where required.
- Bundle, carton, pallet, and label confirmation.
应用领域
建筑和基础设施
- 钢柱底板。
- Building foundations and concrete pads.
- Bridge and barrier components.
- 灯杆、标志结构和公用设施支架。
- Pre-engineered building foundations.
工业设备
- Machine bases and equipment skids.
- 输送机支架和工业框架。
- Storage rack foundations.
- Pipe supports and base brackets.
- Energy, warehouse, and plant construction projects.
For anchor bolt project planning, buyers can also read XZ Fastener’s 锚栓导向 to compare common anchor shapes used in concrete and steel structure work.
如何获得更快的报价
A clear inquiry allows the factory team to calculate material, forming, threading, coating, inspection, and packing more accurately. Please send the ASTM F1554 grade, diameter, overall length, thread length, anchor shape, finish, quantity, nut and washer requirement, drawings, and inspection documents needed.
For bulk orders, spreadsheet size lists are helpful, especially when several diameters and lengths are included. Buyers can 请求报价 with project drawings, packaging details, shipment schedule, and any required inspection documents.
报价清单
- ASTM F1554 级 36、55 级或 105 级。
- 锚栓类型：直形、L 形、J 形、带头或拉拔式。
- 直径、总长度、螺纹长度和螺纹系列。
- Finish and coating thickness requirement, if any.
- 螺母、垫圈、模板或装配要求。
- 每个尺寸的数量和包装方法。
- Inspection requirements and destination port.
常问问题
Can XZ Fastener manufacture ASTM F1554 anchor bolts according to drawings?
Yes. ASTM F1554 anchor bolts can be supplied according to drawings, including straight rods, L-shaped anchors, J-shaped anchors, headed anchors, and special threaded assemblies.
Which ASTM F1554 grades are available?
Grade 36, Grade 55, and Grade 105 can be supplied according to project requirement. The correct grade should be confirmed from the engineering drawing or purchase specification.
地脚螺栓可以配备螺母和垫圈吗？
Yes. Nuts, washers, and assembled packing can be supplied upon request. Please confirm the nut grade, washer type, finish, and whether galvanized assembly fit is required.
What finish is recommended for outdoor anchor bolts?
Hot dip galvanized finish is commonly selected for outdoor foundation anchors and exposed base plate assemblies. Zinc plated, black oxide, plain, and other coatings can also be reviewed according to service conditions.
快速报价需要哪些信息？
Please provide grade, diameter, total length, thread length, shape, finish, quantity, packaging, inspection requirements, drawings, and destination details.
Can ASTM F1554 anchor bolts be packed by project area or item code?
Yes. Bulk packing, bundle labels, pallet labels, customer item codes, and project-area packing can be arranged according to order requirement.
Send Your ASTM F1554 Anchor Bolt Requirements
To help XZ Fastener prepare an accurate factory quotation, please send your size list, grade, finish, quantity, packaging, inspection requirements, drawings, accessory needs, and destination details. For special shapes, galvanized assemblies, templates, or project labeling, 联系方式 XZ Fastener 生产确认前。
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文