Foundation Anchor Bolts for Project and Bulk Supply
Usine de boulons d'ancrage ASTM F1554
XZ Fastener manufactures ASTM F1554 anchor bolts for foundations, base plates, steel columns, equipment supports, light poles, bridge components, and other concrete anchoring projects. As an ASTM F1554 anchor bolts factory, we can supply Grade 36, Grade 55, and Grade 105 options according to drawing and project requirements, including straight anchor rods, L-shaped anchors, headed anchors, and threaded assemblies with nuts and washers. Plain, zinc plated, black oxide, and hot dip galvanized finishes are available upon request. For bulk orders, please confirm diameter, length, thread length, bend shape, finish, quantity, packaging, and inspection requirements before production.
Spécifications rapides
Ce que les acheteurs doivent savoir avant d'acheter des boulons d'ancrage ASTM F1554
ASTM F1554 anchor bolts are not ordinary threaded rods. They are foundation anchoring components where grade, embedment shape, thread length, nut and washer compatibility, coating, and inspection documents must match the project drawing. XZ Fastener supplies related ancres industrielles for concrete and steel structure projects, including straight anchor rods, bent anchor bolts, and custom anchoring parts.
Before comparing prices, buyers should confirm whether the required item is Grade 36, Grade 55, or Grade 105, and whether the anchor is straight, L-shaped, J-shaped, headed, fully threaded, or partially threaded. For mixed project packages that include bolts, nuts, washers, and threaded parts, buyers can review XZ Fastener’s produits de fixation and send a consolidated size list.
Critical RFQ Details
- Catégorie ASTM F1554 : 36, 55 ou 105.
- Diamètre, longueur totale, longueur du filetage et série de filetage.
- Anchor shape: straight, L-bolt, J-bolt, headed, or drawing-based.
- Nut and washer standard, grade, and finish.
- Finish requirement and corrosion exposure.
- Inspection documents, packing, labels, and delivery schedule.
Descriptions d'achat courantes
Procurement descriptions for ASTM F1554 anchor bolts vary by project type. Clear wording helps avoid mismatched grade, shape, thread length, and coating.
- ASTM F1554 Grade 36 anchor bolts, plain finish, with nuts and washers.
- ASTM F1554 Grade 55 hot dip galvanized L anchor bolts for steel column base plates.
- ASTM F1554 Grade 105 straight anchor rods, fully threaded ends, with heavy hex nuts.
- Custom foundation anchor bolts made according to drawing and packing requirement.
- Galvanized anchor bolt assemblies with template, nuts, and washers available upon request.
For distributor or project purchasing lists, ASTM F1554 anchor bolts may be ordered together with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts. XZ Fastener can review these combined lists through its attaches personnalisées service when non-standard lengths, bend shapes, or special labels are required.
Tableau des spécifications détaillées
| Article | Options typiques | Notes de l'acheteur |
|---|---|---|
| Nom du produit | Boulons d'ancrage ASTM F1554 | Used for anchoring structural supports and equipment to concrete foundations. |
| Note | Grade 36, Grade 55, Grade 105 | Grade must follow project drawing, specification, and required mechanical properties. |
| Common Shapes | Straight rods, L-bolts, J-bolts, headed anchor bolts, drawing-based shapes | Send drawing for bent anchors, special ends, or embedded plate details. |
| Diamètre | Inch sizes according to project requirement | Confirm nominal diameter and thread series before quotation. |
| Longueur | Longueur totale standard ou personnalisée | Overall length, embedment length, and exposed thread length should be clearly stated. |
| Sujet | UNC, UNF, filetage complet, filetage partiel, filetage à double extrémité | Thread length and tolerance affect assembly with nuts and templates. |
| Matériel | Carbon steel or alloy steel according to grade | For related material options, see attaches en acier au carbone. |
| Terminer | Plaine, zingué, oxyde noir, galvanisé à chaud, galvanisé mécaniquement | Hot dip galvanized assemblies require attention to nut fit and coating compatibility. |
| Accessoires | Nuts, washers, templates, sleeves, or plates | Les accessoires peuvent être fournis selon les exigences de la commande. |
| Documents | Inspection report, material statement, coating report, dimensional report | Les documents requis doivent être confirmés avant le lancement de la commande. |
| Emballage | Fagots, cartons, caisses en bois, palettes, assemblages étiquetés | Bulk packing and project labels are available upon request. |
Explication du matériau et de la qualité
ASTM F1554 Grade 36 is commonly selected for general foundation anchor bolt use where moderate strength is required. Grade 55 is often specified for higher yield strength while still allowing common project fabrication needs. Grade 105 is used where higher strength is required and should be handled carefully in relation to coating, threading, and installation conditions.
Anchor bolt material should be matched with compatible nuts and washers. For hot dip galvanized anchors, buyers should confirm whether galvanized nuts and washers are required and whether oversizing or fit checks are needed. When projects include DIN, ISO, and ASTM items together, the Guide des normes de fixation DIN et ISO may help purchasing teams separate dimensional standards from mechanical grades.
Typical Grade Selection
- Grade 36: common foundation and construction anchoring.
- Grade 55 : limite d'élasticité plus élevée pour les projets de plaques de base spécifiés.
- Grade 105: higher strength anchoring where drawings clearly require it.
- Final grade should always follow the engineer’s drawing or purchase specification.
Guide de sélection de finition de surface
Anchor bolts are often embedded in concrete or exposed near base plates, so coating selection should consider storage time, jobsite exposure, concrete environment, outdoor corrosion, and assembly fit. XZ Fastener can support related attaches enduites when a project requires consistent finishing across bolts, nuts, and washers.
Plaine ou Huilé
Suitable for indoor storage, embedded sections, and projects where the buyer applies protective coating after installation.
Plaqué zinc
Used for cleaner appearance and light corrosion protection. It is typically chosen for indoor or mild-service environments.
Oxyde noir
Often requested for indoor assemblies or temporary protection. Oiling and storage conditions should be confirmed.
Galvanisé à chaud
Common for outdoor foundations, poles, and exposed base plate assemblies. Nut fit and coating thickness should be reviewed.
Galvanisation Mécanique
Can be considered for some anchor bolt assemblies when project requirements allow this coating route.
Revêtements spéciaux
Zinc-aluminum, Dacromet-type, or project-specific coatings can be reviewed according to drawing and service environment.
Fabrication et contrôle qualité
ASTM F1554 anchor bolt production requires careful control of grade, length, bending shape, thread length, and finish. Typical manufacturing steps include raw material confirmation, cutting, threading, bending or forming, heat or process control when applicable, surface treatment, accessory matching, inspection, marking, and packing.
For project orders, XZ Fastener checks buyer drawings before production and can arrange dimensional inspection for diameter, overall length, bend radius, leg length, thread length, nut fit, coating appearance, and packing labels. Related attaches standards can also be supplied when the anchor bolt package includes bolts, nuts, washers, and threaded rods.
Common Inspection Points
- Confirmation de qualité et de matériau.
- Diameter, overall length, and thread length measurement.
- Bend angle, hook length, and embedded length check.
- Vérification de la jauge de filetage, allez-y et non.
- Nut assembly fit and washer compatibility.
- Coating appearance and coating thickness where required.
- Bundle, carton, pallet, and label confirmation.
Applications
Construction et infrastructures
- Plaques de base de colonne en acier.
- Building foundations and concrete pads.
- Bridge and barrier components.
- Poteaux d'éclairage, structures de signalisation et supports utilitaires.
- Pre-engineered building foundations.
Équipement industriel
- Machine bases and equipment skids.
- Supports de convoyeurs et bâtis industriels.
- Storage rack foundations.
- Pipe supports and base brackets.
- Energy, warehouse, and plant construction projects.
For anchor bolt project planning, buyers can also read XZ Fastener’s guide de boulon d'ancrage to compare common anchor shapes used in concrete and steel structure work.
Comment obtenir un devis plus rapide
A clear inquiry allows the factory team to calculate material, forming, threading, coating, inspection, and packing more accurately. Please send the ASTM F1554 grade, diameter, overall length, thread length, anchor shape, finish, quantity, nut and washer requirement, drawings, and inspection documents needed.
For bulk orders, spreadsheet size lists are helpful, especially when several diameters and lengths are included. Buyers can demander un devis with project drawings, packaging details, shipment schedule, and any required inspection documents.
Liste de contrôle du devis
- ASTM F1554 Grade 36, Grade 55 ou Grade 105.
- Type d'ancre : droite, en forme de L, en forme de J, à tête ou basée sur un dessin.
- Diamètre, longueur totale, longueur du filetage et série de filetage.
- Finish and coating thickness requirement, if any.
- Écrou, rondelle, gabarit ou exigence d’assemblage.
- Quantity per size and packing method.
- Inspection requirements and destination port.
FAQ
Can XZ Fastener manufacture ASTM F1554 anchor bolts according to drawings?
Yes. ASTM F1554 anchor bolts can be supplied according to drawings, including straight rods, L-shaped anchors, J-shaped anchors, headed anchors, and special threaded assemblies.
Which ASTM F1554 grades are available?
Grade 36, Grade 55, and Grade 105 can be supplied according to project requirement. The correct grade should be confirmed from the engineering drawing or purchase specification.
Les boulons d'ancrage peuvent-ils être fournis avec des écrous et des rondelles ?
Yes. Nuts, washers, and assembled packing can be supplied upon request. Please confirm the nut grade, washer type, finish, and whether galvanized assembly fit is required.
What finish is recommended for outdoor anchor bolts?
Hot dip galvanized finish is commonly selected for outdoor foundation anchors and exposed base plate assemblies. Zinc plated, black oxide, plain, and other coatings can also be reviewed according to service conditions.
Quelles informations sont nécessaires pour un devis rapide ?
Please provide grade, diameter, total length, thread length, shape, finish, quantity, packaging, inspection requirements, drawings, and destination details.
Can ASTM F1554 anchor bolts be packed by project area or item code?
Yes. Bulk packing, bundle labels, pallet labels, customer item codes, and project-area packing can be arranged according to order requirement.
Send Your ASTM F1554 Anchor Bolt Requirements
To help XZ Fastener prepare an accurate factory quotation, please send your size list, grade, finish, quantity, packaging, inspection requirements, drawings, accessory needs, and destination details. For special shapes, galvanized assemblies, templates, or project labeling, contacter XZ Fastener avant la confirmation de la production.
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文