A2 and A4 fasteners are both stainless steel fasteners, but they are not selected for the same environment. The main difference is corrosion resistance.

In buyer terms, A2 is commonly used for general stainless applications. A4 is selected when chloride exposure, coastal air, or chemical contact becomes more serious.

The wrong choice may not fail during installation. It usually shows up later as staining, pitting, seized threads, or customer complaints.

A2 和 A4 是什么意思

Under ISO 3506, A2 and A4 refer to austenitic stainless steel fastener groups. Buyers often compare them with 304-type and 316-type stainless steel.

买家可以评论 不锈钢紧固件 when comparing A2 and A4 options.

When to Choose A2 Fasteners

General Industrial Use

A2 fasteners are suitable for many normal environments.

Use A2 for:

• 室内机械
• 电气柜
• Furniture hardware
• Food equipment with mild exposure
• Clean outdoor structures
• General brackets and covers

A2 is usually easier to source and more cost-effective than A4. For standard sizes, buyers can also check 标准紧固件.

When to Choose A4 Fasteners

Chloride and Harsh Exposure

A4 is the better choice when corrosion risk is higher.

Use A4 for:

• 海岸结构
• 船用设备
• 化工厂
• Outdoor humid environments
• Washdown equipment
• Swimming pool surroundings
• Road-salt exposure areas

A4 is not immune to corrosion, but it gives better resistance than A2 in chloride environments.

For projects where corrosion resistance is critical, compare A4 with 各种涂层紧固件 在最终批准之前。

买家常见错误

避免这些问题：

• Using A2 in marine or coastal projects.
• Choosing A4 only by name without checking strength class.
• Mixing A2 bolts with A4 nuts in critical assemblies.
• Ignoring thread galling during stainless steel installation.
• Not confirming whether A2-70, A4-70, or A4-80 is required.
• Selecting stainless steel without checking the connected metal.

For high-load stainless assemblies, review 高强度紧固件 and confirm mechanical requirements.

询价清单

订购前，请提供：

1. A2 or A4 grade
2. Property class: 50, 70, or 80
3. Product type: bolt, nut, washer, screw, stud
4. Size, pitch, and length
5. Surface condition or passivation requirement
6. 应用环境
7. 配套螺母和垫圈
8. 所需检验文件

最终建议

Choose A2 for general stainless steel fastening. Choose A4 when corrosion resistance matters more, especially in chloride, coastal, marine, and chemical environments.

The safest RFQ defines grade, strength class, size, thread, matching parts, and working environment before production.