High Strength Flange Bolts for Industrial Assembly
10.9级六角法兰螺栓厂
XZ Fastener manufactures Class 10.9 hex flange bolts for machinery, automotive parts, construction hardware, equipment frames, brackets, and high clamp load assemblies. The integrated flange head helps spread load and can reduce the need for a separate washer in selected applications. Bolts can be supplied to DIN 6921, ISO 4162, or drawing requirements, with metric coarse or fine thread options available according to order requirement. Factory orders can be produced in carbon steel or alloy steel with black oxide, zinc flake, phosphate, zinc plated, or other finishes reviewed upon request.
快速规格
What Buyers Should Know Before Sourcing Class 10.9 Hex Flange Bolts
Class 10.9 hex flange bolts are used where a high strength metric bolt and a larger bearing surface are needed in one part. When comparing 紧固件产品, buyers should confirm dimensional standard, flange diameter, head style, thread pitch, thread length, serrated or non-serrated flange, material, heat treatment, and finish.
The flange can help distribute load, but it should still be checked against the mating surface, slot size, clearance hole, and required clamp load. If an assembly requires special flange diameter, non-standard length, modified thread, or drawing-based geometry, XZ Fastener can review related 定制紧固件 together with the flange bolt order.
工厂订单清单
- 确认DIN 6921、ISO 4162 或基于图纸的尺寸。
- 发送直径、螺距、长度、螺纹长度和法兰样式。
- Specify Class 10.9 mechanical property requirement.
- 检查表面处理选择的耐腐蚀性、摩擦力和装配性能。
- 提供包装方式、纸箱重量、托盘方案、检验要求。
常见采购说明
- Class 10.9 hex flange bolts, DIN 6921, non-serrated flange, black oxide.
- ISO 4162 hexagon flange bolts, Class 10.9, metric coarse thread.
- Class 10.9 serrated flange bolts, zinc flake coating, carton packing.
- Metric hex flange bolts, partial thread, phosphate and oil finish.
- High strength flange bolts packed by size, item code, and pallet label.
For mixed factory purchasing lists, Class 10.9 flange bolts may be ordered together with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts. Buyers can combine these with 标准紧固件 以获得更广泛的装配供应。
详细规格表
| 规格项目 | 典型选项 | 买家须知 |
|---|---|---|
| 产品名称 | Class 10.9 hex flange bolts | High strength metric bolts with integrated flange bearing surface. |
| 尺寸标准 | DIN 6921、ISO 4162，或买家图纸 | 确认法兰直径、头部高度、扳手尺寸和锯齿要求。 |
| 线程 | 公制粗牙或细牙，全螺纹或局部螺纹 | 发送直径、螺距、长度和螺纹长度要求。 |
| 强度等级 | 10.9 级 | Used where higher tensile strength and controlled clamp load are required. |
| 材质 | Medium carbon steel or alloy steel | 碳钢紧固件 and alloy steel options can be reviewed by application. |
| 完成 | Black oxide, phosphate, zinc flake, zinc plated, selected coatings | For high strength bolts, coating process and embrittlement risk should be reviewed. |
| 检查 | 尺寸检查、螺纹量规、硬度、拉伸试验、表面检查 | 可根据采购订单要求安排检验报告。 |
| 包装 | 散装纸箱、小盒子、袋子、木箱、托盘或组装套件 | 标签、条形码、纸箱重量和托盘布局可根据要求提供。 |
最终规格应在生产安排前通过采购订单、图纸、样品或项目要求进行确认。
材质及牌号说明
Class 10.9 hex flange bolts are typically produced from heat treated medium carbon steel or alloy steel. The property class is selected for assemblies that need higher tensile strength than common general-purpose bolts, while the flange head provides a wider bearing surface under the head.
Compared with lower strength bolts, Class 10.9 bolts require closer control of heat treatment, thread quality, surface condition, and coating process. Buyers working with different metric standards can review the DIN和ISO紧固件标准指南 when comparing DIN 6921, ISO 4162, DIN 933, and related product descriptions.
牌号选择注意事项
- Class 10.9 is used for higher strength metric assemblies.
- Flange heads help spread load on compatible mating surfaces.
- Serrated flange options may increase resistance to loosening in selected applications.
- Mating threads, washers, and nuts should be matched to the bolt strength and finish.
表面处理选择指南
一般工业饰面
Black oxide and phosphate finishes are commonly selected for Class 10.9 flange bolts used in machinery, equipment, and controlled indoor environments. Zinc plated finish can be requested, but process control should be discussed because high strength bolts require careful handling of embrittlement risk.
面向腐蚀的饰面
Zinc flake coatings are often reviewed for higher corrosion resistance on high strength fasteners. Hot dip galvanized finish may be considered only when the full specification, dimensional fit, thread engagement, and application conditions are checked. Related 涂层紧固件 可以一起报价以获得一致的完成计划。
制造和质量控制
Class 10.9 hex flange bolts are produced through material preparation, forming, thread rolling, heat treatment, surface finishing, inspection, and packing. Factory control focuses on mechanical property, flange geometry, thread fit, surface finish, head dimensions, and packing accuracy according to order requirement.
对于包含相关内容的订单 工业螺栓, nuts, and washers, XZ Fastener can help organize item-code sorting, mixed cartons, pallet labels, and inspection documents. This supports equipment assembly, construction hardware, and distributor stock replenishment with fewer receiving errors.
典型检查点
- 头部高度、对边尺寸、法兰直径和锯齿检查。
- 螺纹量规检查用于通配和非通配。
- 根据订单要求进行硬度和机械性能审查。
- 表面光洁度外观和涂层一致性检查。
- 装运前包装数量、纸箱标签和托盘计划验证。
应用领域
- Automotive brackets, chassis parts, and equipment mounting points.
- Machinery frames, conveyor systems, and industrial equipment bases.
- 建筑五金件、钢支架、防护板和维护组件。
- 经销商库存、工厂补货和组装的紧固件套件。
Class 10.9 hex flange bolts are often chosen when buyers need a strong metric bolt with a built-in bearing surface. For assemblies that still require additional load distribution, XZ Fastener can review matching 平垫圈 and related parts according to the drawing and installation conditions.
如何获得更快的报价
To receive a clear quotation for Class 10.9 hex flange bolts, send the standard or drawing, diameter, pitch, length, thread length, flange type, finish, quantity, packing method, delivery destination, and inspection requirements. If the bolt is used in automotive, machinery, or structural hardware, include application notes and any required test reports.
对于工厂订单， 联系方式 XZ Fastener 带有结构化尺寸列表和首选包装详细信息。纸箱重量、物品标签、托盘尺寸、涂层要求和检验文件等信息有助于更有效地确认生产和装运计划。
常问问题
What standard is commonly used for Class 10.9 hex flange bolts?
DIN 6921 和ISO 4162 是公制六角法兰螺栓的常见参考号。当法兰直径、头部高度或锯齿细节很关键时，买家应确认所需的标准或提供图纸。
What material is used for Class 10.9 hex flange bolts?
Class 10.9 hex flange bolts are typically made from heat treated medium carbon steel or alloy steel. The exact material can be reviewed according to order requirement and project specification.
Can Class 10.9 flange bolts be supplied with serrated flange?
Yes. Serrated and non-serrated flange options can be reviewed according to drawing, standard, and application requirement. Buyers should specify this clearly in the inquiry.
Which finishes are suitable for Class 10.9 flange bolts?
Black oxide, phosphate, zinc flake, zinc plated, and selected coatings can be reviewed. For high strength bolts, coating process and hydrogen embrittlement risk should be discussed before order confirmation.
Can Class 10.9 hex flange bolts be supplied in fine thread?
可根据订单要求提供公制粗牙和细牙螺纹选项。询价时请提供直径、螺距、长度和螺纹长度。
可以索取什么检查文件？
可根据订单要求安排尺寸检验、螺纹量规检验、硬度报告、力学性能报告、涂层检验、包装验证。
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文