热镀锌地脚螺栓制造商
XZ Fastener manufactures hot dip galvanized anchor bolts for concrete foundations, steel structures, equipment bases, bridge work, solar mounting, and outdoor construction projects. L type, J type, straight, headed, bent, and plate-type anchor bolts can be supplied according to drawings, standards, or project lists. Buyers can specify diameter, length, thread length, bend dimensions, material grade, galvanizing requirement, nut and washer sets, packing, and inspection documents. For long-term outdoor service, hot dip galvanized coating helps protect carbon steel anchor bolts from corrosion while maintaining practical project cost control.
快速规格
买家在采购锚栓之前应该了解什么
Anchor bolts are usually ordered for fixed installation points, so dimensional clarity matters. The RFQ should define bolt type, diameter, total length, thread length, bend length, hook radius, plate size if used, projection length above concrete, nut quantity, washer quantity, and finish requirement. Buyers comparing project options can review XZ Fastener’s 地脚螺栓类型指南 to align L bolts, J bolts, headed bolts, and straight anchor rods before placing an order.
Hot dip galvanizing is often selected for foundations, outdoor steel structures, and exposed equipment bases. Because the zinc layer is thicker than standard electroplating, thread fit should be confirmed with matching nuts and washers before bulk production.
Purchasing Checkpoints
- Confirm whether the anchor bolt is cast-in-place, post-installed, headed, bent, or plate-welded.
- Specify thread length and projection length separately.
- State whether nuts, flat washers, plate washers, or templates are included.
- Define hot dip galvanized standard, coating thickness expectation, and thread fit requirement.
- Request lot labels, pallet packing, and inspection reports when needed for site receiving.
For projects that include multiple fasteners, keep anchor bolts, threaded rods, hex bolts, nuts, washers, and special parts separated by drawing number and installation area.
常见采购说明
Buyers may use different terms for the same anchor bolt order. XZ Fastener can quote from drawings, standards, samples, or dimension tables. Common purchasing descriptions include:
- Hot dip galvanized L anchor bolts with nuts and washers for concrete foundation.
- HDG J bolts, carbon steel, metric thread, pallet packing for steel structure installation.
- ASTM F1554 anchor bolts, Grade 36 or Grade 55, hot dip galvanized finish.
- Straight anchor rods with chamfered ends, full thread or partial thread by drawing.
- Foundation bolt sets with nuts, flat washers, plate washers, and installation templates.
- Project package including DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, and metric hex head bolts.
- Mixed finish order with zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts for different assembly zones.
详细规格表
| 规格项目 | 可用选项 | 买家须知 |
|---|---|---|
| 地脚螺栓类型 | L type, J type, headed, straight rod, plate anchor, hook bolt, custom bent bolt | Send a drawing if bend angle, hook radius, or plate location is controlled. |
| 线程系统 | 公制粗牙、公制细牙、UNC、UNF或特殊螺纹 | Thread gauge checks can be arranged according to order requirement. |
| 直径范围 | M8-M72、3/8 inch-2 1/2 inch 及更大尺寸（按图纸） | Large-diameter anchor bolts usually need longer preparation time and clear tolerances. |
| 长度范围 | Short foundation bolts, long anchor rods, custom lengths according to project list | 分别注明总长度、嵌入长度、突出长度和螺纹长度。 |
| 材质 | Q235、Q355、35K、45钢、40Cr、ASTM A36、ASTM F1554材料 | Material should match tensile load, installation method, and project design requirements. |
| 强度等级 | 4.8, 5.8, 8.8, 10.9, ASTM F1554 Grade 36/55/105 | High-strength anchors may require heat treatment and controlled testing. |
| 表面处理 | Hot dip galvanized, zinc plated, black oxide, plain, phosphate, or other coating | Hot dip galvanized coating is commonly selected for outdoor corrosion resistance. |
| 配件 | Hex nuts, heavy hex nuts, flat washers, plate washers, templates | Galvanized nut fit should be checked after coating or tapping. |
| 包装 | 捆包、纸箱、木箱、钢托盘、客户标签 | Heavy anchor bolts often need reinforced packing for export shipment. |
| 检查 | Dimension, thread, coating, visual, tensile, hardness, and assembly checks | 可根据订单要求准备检验报告。 |
材质及牌号说明
For general foundations and light structural fastening, carbon steel anchor bolts are often sufficient when the design load is moderate. For heavy equipment bases, bridge structures, energy projects, or high-load steel columns, buyers may specify medium carbon steel, alloy steel, or ASTM F1554 grades. Material selection should be based on tensile load, shear load, embedment design, installation method, and the surrounding concrete or steel structure.
Strength grade must be matched with compatible nuts and washers. For example, a high-strength anchor bolt should not be paired with low-grade nuts unless the design specifically allows it. For load evaluation, XZ Fastener’s 地脚螺栓承载能力指南 can help buyers discuss tensile, shear, and pull-out concerns with engineers before ordering.
When anchor bolts are part of a broader site package, XZ Fastener can also supply related hex bolts, threaded rods, nuts, washers, and made-to-drawing parts according to order requirement.
表面处理选择指南
热镀锌
Hot dip galvanized anchor bolts are suitable for outdoor foundations, humid service conditions, utility structures, coastal projects, and steel structures exposed before or after installation. The coating offers practical corrosion protection and is commonly required for construction and infrastructure orders.
镀锌
Zinc plating is smoother and thinner, often used for indoor or light-duty assemblies. It may not provide the same outdoor durability as hot dip galvanizing, so the service environment should be reviewed before replacing one finish with another.
普通、黑色氧化或磷酸盐
Plain, black oxide, and phosphate finishes are more common for indoor machinery or temporary protection. Outdoor use should be evaluated carefully, especially for anchor bolts embedded in concrete or exposed to water, soil, or chemicals.
Thread Fit After Coating
Hot dip galvanized coating increases thread thickness. Buyers can review XZ Fastener’s guide on 涂层厚度如何影响地脚螺栓螺纹配合 before confirming nut tolerance and inspection requirements.
For critical orders, specify the coating standard, coating thickness expectation, nut tapping requirement, and whether thread fit should be checked with the supplied nuts before packing.
制造和质量控制
Anchor bolt production may include raw material confirmation, cutting, chamfering, threading, bending, heading, welding of plates when required, heat treatment, hot dip galvanizing, thread cleaning, inspection, and packing. The exact route depends on bolt shape, diameter, length, grade, and project drawings.
XZ Fastener can support project discussions using the 地脚螺栓制造工艺 as a reference for cutting, bending, threading, coating, and packing checkpoints. For custom anchor bolts, buyers should provide drawings with tolerances, material, finish, nut and washer requirements, inspection points, and marking details.
Quality control can include dimension checks, thread gauges, visual finish inspection, coating thickness checks, assembly fit with nuts, tensile testing, hardness testing, and packing verification when requested. Reports can be prepared according to order requirement.
应用领域
建筑和基础设施
- 钢柱底板和结构基础
- 桥梁、公路、护栏、市政工程
- 太阳能安装底座和户外设备底座
- 管架、实用支架和支撑架
- 仓库和工业建筑的混凝土基础
机械和能源项目
- 重型机械安装和调平组件
- 风能、太阳能和电力设备基础
- 石化及工业厂房基础固定
- 指定镀锌锚的邻近海洋的钢支撑
- 满足经常性地脚螺栓需求的分销商库存
For project-specific drawings, XZ Fastener can review dimensions and produce 定制紧固件 according to samples, CAD drawings, or detailed specification sheets.
如何获得更快的报价
To receive an accurate quotation, send a size list with anchor bolt type, diameter, thread pitch, total length, embedded length, projection length, thread length, bend dimensions, material, strength grade, finish, quantity, nut and washer requirements, packing method, destination, and required inspection documents.
If the order includes multiple anchor bolt drawings, mark each item with a drawing number and quantity. For galvanized anchor bolts, also confirm whether nuts should be galvanized, oversize tapped, or supplied separately. Photos, samples, and installation drawings can reduce back-and-forth communication and help avoid wrong dimensions before production.
常问问题
Can XZ Fastener manufacture hot dip galvanized anchor bolts from drawings?
Yes. Anchor bolts can be manufactured from drawings, samples, or detailed dimension sheets. Please include material, grade, thread, bend shape, total length, embedded length, projection length, finish, quantity, and inspection requirements.
可以提供哪些类型的地脚螺栓？
Common types include L anchor bolts, J anchor bolts, headed anchor bolts, straight anchor rods, plate anchor bolts, hook bolts, and custom bent bolts. Non-standard dimensions are available upon request.
热浸镀锌对地脚螺栓螺纹有影响吗？
Yes. Hot dip galvanizing creates a thicker zinc layer, so thread fit with nuts must be considered. Matching galvanized nuts, suitable tapping, and assembly checks can be arranged according to order requirement.
螺母和垫圈可以与地脚螺栓一起提供吗？
是的。地脚螺栓可配备六角螺母、重型六角螺母、平垫圈、板垫圈、弹簧垫圈或安装模板。买家应指定每个螺栓的每个配件的数量。
可以索取什么检查文件？
Depending on the order, buyers may request dimensional inspection, thread inspection, coating checks, material information, tensile testing, hardness testing, and packing photos. Requirements should be confirmed before production.
What information is most important for an anchor bolt RFQ?
The most important information includes size list, drawing, material, grade, finish, quantity, packaging, nut and washer requirements, and inspection requirements. Clear drawings help reduce quotation time and production risk.
Send Your Anchor Bolt Drawing and Size List
For a faster quotation, send the size list, finish, quantity, packaging, and inspection requirements together with drawings or marked photos. XZ Fastener can quote hot dip galvanized anchor bolts with matching nuts, washers, templates, and related project fasteners according to order requirement.
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文