Hersteller von farbigen Verbindungselementen aus Zink
XZ Fastener manufactures colored zinc fasteners for buyers who need controlled corrosion protection, clear part identification, and consistent appearance across bolts, nuts, screws, washers, and custom parts. Colored zinc usually refers to electroplated zinc with white, blue, yellow, black, or other passivation colors according to order requirement. These fasteners can be supplied according to DIN, ISO, ASTM, ANSI, GB, JIS, or drawing requirements. Buyers can specify base material, strength grade, coating thickness, passivation color, salt spray expectation, packaging, labeling, and inspection requirements before production.
Kurzspezifikationen
Was Käufer wissen sollten, bevor sie farbige Zinkbefestigungen beschaffen
Colored zinc fasteners are often selected when buyers need a practical coating for indoor or protected assemblies, with different passivation colors used for appearance, part identification, or stocking control. The color itself should not be the only specification; coating thickness, passivation type, sealing, corrosion test requirements, and thread fit must also be defined.
Zum Vergleich der Oberflächen können Käufer die überprüfen Leitfaden zur Auswahl der Oberflächenbeschaffenheit. For hex bolt programs, XZ Fastener also supplies zinc plated hex nuts and matching bolt, nut, and washer sets according to order requirement.
Schlüsselkaufschecks
- Confirm whether the color is white, blue, yellow, black, clear, or buyer-defined zinc passivation.
- Define base part type: bolt, nut, screw, washer, anchor, threaded rod, or custom fastener.
- State coating thickness, salt spray expectation, and whether sealing is required.
- Check thread fit after plating, especially for fine thread and assembled parts.
- Confirm packing, labels, mixed-color separation, and inspection documents.
Allgemeine Einkaufsbeschreibungen
Procurement teams may describe these products as colored zinc fasteners, color zinc plated fasteners, blue zinc fasteners, yellow zinc fasteners, black zinc fasteners, white zinc screws, zinc plated bolts and nuts, or electro galvanized fasteners with colored passivation. To reduce receiving disputes, the purchase order should state both the required color and the technical coating requirement.
Related purchasing phrases may include DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts when a buyer is comparing finish options for carbon steel fasteners.
Detaillierte Spezifikationstabelle
| Artikel | Verfügbare Optionen | Hinweise des Käufers |
|---|---|---|
| Produktumfang | Bolts, nuts, screws, washers, anchors, threaded rods, and custom fasteners | Mixed product orders should define coating color and packing for each item line. |
| Standard | DIN, ISO, ASTM, ANSI, GB, JIS, IFI, or custom drawing | Provide the exact standard or drawing revision to confirm dimensions and tolerances. |
| Durchmesser | Metric, inch, ST screw sizes, or custom diameter | Small screws and fine threads need careful control of coating buildup. |
| Material | Niedrig Kohlenstoffstahl, mittel Kohlenstoffstahl, Legierter Stahl, Edelstahl, Messing | Material selection affects strength, plating behavior, hydrogen embrittlement risk, and cost. |
| Festigkeitsklasse | 4.8, 5.8, 8.8, 10.9, 12.9, screw grades, nut grades, or drawing-defined class | High-strength electroplated parts may require embrittlement risk control and baking requirements. |
| Color and Finish | White zinc, blue zinc, yellow zinc, black zinc, clear zinc, sealed zinc | Provide sample or color expectation for visible parts, because shade can vary by process and batch. |
| Testen | Coating thickness, salt spray, adhesion, dimensional, thread, hardness, tensile, and packing checks | Inspektionsumfang kann mit vorbereitet werden RFQ-Checkliste für die Qualitätsprüfung und -prüfung von Verbindungselementen. |
| Verpackung | Bulk carton, small box, plastic bag, kit pack, pallet, buyer label, or barcode label | Mixed colors should be packed and labeled separately to avoid warehouse confusion. |
Material- und Sortenerklärung
Carbon steel is commonly used for colored zinc fasteners because it accepts electroplating well and offers practical cost control for general industrial use. Grade 8.8 carbon steel hex bolts are widely used in machinery and equipment assemblies, while low carbon steel screws and nuts are suitable for lighter-duty fastening.
For higher-strength fasteners, buyers should define mechanical grade, coating process, baking requirement if applicable, and inspection scope before production. When comparing zinc with other finishes, the Leitfaden für Befestigungselemente schwarz oxidiert vs. verzinkt can support practical selection.
Leitfaden zur Auswahl der Oberflächenbeschaffenheit
Colored zinc is suitable for many indoor, protected, and moderate-duty environments where controlled thread fit and basic corrosion protection are required. White and blue zinc are often selected for a clean bright appearance, yellow zinc for traditional identification and higher visual contrast, and black zinc for darker assemblies.
For outdoor, coastal, or high-humidity use, buyers may need hot dip galvanizing, zinc flake, dacromet, stainless steel, or another coating system. The Leitfaden zur Beschichtung von Verbindungselementen can help compare zinc, HDG, dacromet, PTFE, and other options.
Herstellung und Qualitätskontrolle
Production can include raw material inspection, cold heading or forming, thread rolling or machining, heat treatment when required, cleaning, electroplating, colored passivation, sealing when specified, inspection, and packing. For colored zinc fasteners, thread fit, coating thickness, color consistency, and packing separation are key control points.
Fertigungspunkte
- Base fastener produced according to standard or drawing requirement.
- Cleaning and plating process selected according to material and part type.
- Colored passivation applied as white, blue, yellow, black, or buyer-defined finish.
- Sealing and baking can be discussed according to order requirement.
Inspektionspunkte
- Dimensions, thread gauges, drive fit, and mating part checks.
- Coating thickness, color appearance, adhesion, and salt spray when required.
- Hardness, tensile, proof load, and mechanical checks for graded parts.
- Carton count, color separation, labels, pallet condition, and shipping marks.
For plated parts, buyers should also consider white rust, peeling, uneven coating, and storage conditions before shipment and warehouse receipt.
Anwendungen
Colored zinc fasteners are used in machinery assembly, electrical enclosures, furniture hardware, automotive service parts, light construction hardware, HVAC panels, agricultural equipment, appliance assembly, retail hardware packs, and distributor stock. Different colors can help identify size groups, part families, or assembly areas.
For non-standard parts, XZ Fastener can review kundenspezifische Verbindungselemente nach Zeichnung, including material, thread, head style, coating color, packing, and inspection requirements.
Typische Käufer
- Importeure von Verbindungselementen und regionale Händler
- Maschinen- und Gerätehersteller
- Electrical enclosure and sheet metal factories
- Automotive service part suppliers
- Construction hardware and retail kit packers
So erhalten Sie schneller ein Angebot
A clear inquiry helps XZ Fastener check material, forming method, plating process, packing, and inspection cost quickly. Please send the product type, standard or drawing, diameter, length, thread type, grade, zinc color, coating thickness or salt spray requirement, quantity, packaging method, and inspection requirements.
FAQ
What colors are available for colored zinc fasteners?
Common options include white zinc, blue zinc, yellow zinc, black zinc, and clear zinc. Other appearances can be discussed according to order requirement, material, and plating process.
Are colored zinc fasteners suitable for outdoor use?
Colored zinc fasteners are usually more suitable for indoor or protected environments. For outdoor, high-humidity, coastal, or chemical exposure, buyers should consider stronger corrosion protection or confirm additional sealing requirements.
Can colored zinc bolts, nuts, screws, and washers be supplied together?
Yes. Bolt, nut, screw, and washer sets can be supplied with matching or different zinc colors according to order requirement. Thread fit and coating thickness should be checked for assembled parts.
Can high-strength fasteners be supplied with colored zinc plating?
High-strength fasteners can be supplied with colored zinc plating according to requirement, but buyers should confirm grade, coating process, hydrogen embrittlement risk control, baking requirement, and testing scope.
What information is needed for a colored zinc fastener quotation?
Please provide product type, standard or drawing, size, thread, material, grade, zinc color, coating thickness or test requirement, quantity, packing method, and inspection requirements.
Can colored zinc fasteners be packed with buyer labels?
Yes. Buyer labels, barcode labels, small boxes, bulk cartons, kit packs, and pallet labels are available upon request. Mixed colors should be packed and marked clearly before shipment.
Send Your Colored Zinc Fastener Inquiry
To receive a practical quotation, send your size list, finish requirement, quantity, packaging method, and inspection requirements. XZ Fastener can review colored zinc bolts, nuts, screws, washers, custom fasteners, mixed-color packing, and inspection documents according to your purchasing plan.
Fordern Sie ein Angebot an
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文