Español 
English 
Tiếng Việt 
Русский 
العربية Fastener grade labeling is easy to overlook until the wrong parts reach the warehouse or job site. A carton may say “M16 bolts,” but without grade, material, finish, and batch information, receiving teams cannot confirm whether the goods match the purchase order.
For industrial buyers, wrong-spec delivery is not only a paperwork issue. It can lead to assembly failure, customer claims, project delays, or costly sorting work.
Why Grade Labeling Matters
Fastener grade defines mechanical performance. A class 8.8 bolt is not the same as class 10.9. A2-70 stainless steel is not the same as A4-80. ASTM A193 B7 stud bolts should not be mixed with general carbon steel rods.
Buyers sourcing high-strength fasteners should treat grade labeling as part of quality control, not only packaging.
What Should Be on a Fastener Label?
A clear label should allow warehouse staff to identify the product without opening every carton.
| Label Item | Example | Why It Matters |
|---|---|---|
| Product name | Hex bolt, nut, washer, threaded rod | Identifies the part type |
| Estándar | DIN 933, ISO 4017, ASTM A193 | Confirms dimensional requirement |
| Size | M16 × 80, 1/2”-13 × 2” | Prevents mixed-size delivery |
| Grade / class | 8.8, 10.9, A2-70, B7 | Confirms strength requirement |
| Material | Carbon steel, 304, 316, alloy steel | Avoids material confusion |
| Finish | Zinc plated, HDG, black oxide | Confirms surface treatment |
| Cantidad | 500 pcs, 25 kg, 100 sets | Supports receiving accuracy |
| Batch number | Lot No. or heat No. | Supports traceability |
For full product planning, buyers can review fastener products before setting labeling rules.
Common Grade Labeling Mistakes
Mixing Grade Systems
Metric property classes and inch-grade systems should not be mixed casually.
For example, metric class 10.9 and SAE Grade 8 are not the same label system, even if both are high-strength categories. The PO, carton label, packing list, and inspection report should use the same system.
Missing Stainless Steel Grades
For stainless steel orders, labels should clearly show 304, 316, A2-70, A4-70, or A4-80 where applicable. This is especially important for stainless steel fasteners used in outdoor, marine, or chemical applications.
Vague Surface Finish Terms
“Galvanized” may mean zinc plated or hot-dip galvanized. These are different finishes. For corrosion-sensitive orders, compare coated fasteners and require exact finish wording on labels.
Buyer’s Labeling Checklist
Before shipment, confirm:
- Carton labels match the PO.
- Grade appears clearly on each carton.
- Batch number matches the inspection report.
- Mixed-size orders have separate labels.
- Labels match the packing list and invoice.
- Custom parts show drawing or item number.
- Private label requirements are approved before packing.
For drawing-based items, use custom non-standard fasteners and include the drawing revision on the label.
Final Advice
Fastener grade labeling prevents wrong-spec delivery before it becomes a warehouse or field problem. A good label should connect the product, purchase order, batch, inspection report, and final application.
Clear labeling is simple, but it protects the entire supply chain.