XZ INFORMACIONES

Conocimiento de fijación industrial · Tendencias de la industria · Conocimientos técnicos

Stud Wrench Flats: Drawing Requirements for Buyers

facebook
x
LinkedIn
Reddit
WhatsApp
Correo electrónico

Table of Contents

A drawing note asking for “two flats for a spanner” leaves several purchasing questions open. The manufacturer needs a defined feature, while the buyer needs to know whether that feature matches the intended access and assembly arrangement. Resolve those questions before a standard stud is quoted as a custom machined part.

Define the flats as a separate feature

Show the distance across the flats, their axial length and their position on the stud. Identify the reference face or datum used for the location. State any end transitions, radii or edge requirements that affect the approved profile. Where the flats must be oriented relative to another feature, include an inspection reference for that relationship.

Keep the tool size and the manufactured dimension distinct. A nominal spanner description should not be used to invent a machining tolerance. Have the designer establish the actual requirement and provide the mating-tool or assembly information needed to review access. Where tool clearance is important, a dimensioned view of the surrounding assembly is more useful than the tool name alone.

Preserve the complete stud definition

Identify both the original stud requirements and the additional machining. Include thread details, overall-length convention, material specification and finished condition. If the flats interrupt a threaded region, the approved drawing must show the intended extent. Do not leave the manufacturer to decide which threads may be removed or how far a relief can extend.

  • Approved part drawing and revision.
  • Across-flat dimension and tolerance.
  • Flat length and datum-based position.
  • Edge and transition requirements.
  • Relationship to threads, shoulders or other machined features.
  • Required dimensional evidence and sample approval route.

Obtain an engineering decision on the modification

Machining flats changes the component geometry. The buyer's responsible engineer should approve the modified part for its intended application and establish any additional product or inspection requirements. A supplier's ability to machine the feature is different from evidence that it is suitable for a particular loaded joint, pressure-boundary assembly or service environment.

Avoid adding a generic installation torque because flats are present. The tool interface does not by itself define the correct assembly method or allowable load. If the flats are intended only for positioning or a particular operation, have that limitation stated in the controlled assembly information so it is not lost when the order reaches the workshop.

Review a measurable first-off record

Agree which characteristics will appear on the dimensional report and how the sample will be identified. Check the flat dimensions, location and other specified relationships against the same drawing revision used for manufacture. Record the finished condition so an approval of an unfinished trial piece is not mistaken for approval of the final supplied condition.

For repeat orders, confirm that the tool-access requirement and adjacent component revisions remain current. Keep any approved deviation with the affected part and quantity. At dispatch, use the custom part number and drawing revision in the identification records rather than labelling the item solely as a standard stud.

Send the approved requirements for review

Send the drawing or full specification, quantity and destination to XZ Fastener for a manufacturing and quotation review. Include material inspection reports, dimensional reports and batch traceability in the requested document scope. Any EN 10204 3.1/3.2 or third-party inspection requirements need their issuing arrangements, scope and buyer approval confirmed before ordering.

For the wider purchase file, use our project fastener order control records. The stud length guide addresses overall and effective thread length separately.

Buscar artículos
Suscríbete a noticias técnicas

Conocimiento de fijación industrial · Tendencias de la industria · Conocimientos técnicos

Póngase en contacto rápidamente con un experto en negocios

XZ Ingeniero de ventas

Bulk fastener quotations · MOQ 1,000 pieces

Tell us your fastener requirements. Our sales team will prepare your quotation.

Lead time: 3 days. Custom packaging available. Shipping time and order details are confirmed in your quotation.

Optional: attach drawings, photos or a specification list. Accepted: PDF, JPG, PNG, Word, Excel, XML and TXT.

¡Gracias por visitarnos!

Por favor comparta su consulta con sales@xzfastener.com