Cold heading is one of the main production methods for bolts, screws, rivets, pins, and many special fasteners. The process forms metal at room temperature by forcing wire into dies under high pressure. It is fast, efficient, and well suited for large-volume production.

For buyers, the important point is this: cold heading is not only a manufacturing choice. It affects strength, dimensional control, tooling cost, MOQ, and final unit price.

What Cold Heading Means

Cold heading starts with wire rod or drawn wire. The wire is cut to length, then shaped in dies by one or more forming blows. After heading, the part may go through thread rolling, heat treatment, surface finishing, sorting, and packing.

Many attaches standards are made this way because the process is stable and cost-effective when the quantity is suitable.

Basic Process Flow

1. Select wire material and diameter.
2. Prepare wire by drawing, annealing, or phosphating if required.
3. Cut wire blanks to controlled length.
4. Form the head, shank, shoulder, or special shape in dies.
5. Roll the thread instead of cutting it where applicable.
6. Apply heat treatment for required strength class.
7. Finish with zinc plating, black oxide, galvanizing, or other coating.
8. Inspect dimensions, hardness, thread, and surface condition.

How Cold Heading Affects Strength

Cold heading usually improves material flow compared with machining. Since the part is formed rather than cut from bar stock, the grain flow can follow the fastener shape more naturally. Thread rolling also compresses the thread surface, which can improve fatigue performance compared with cut threads in many applications.

This matters for high-strength carbon steel and alloy steel bolts. Buyers sourcing attaches en acier au carbone should confirm the required property class, heat treatment, and mechanical testing standard.

How Cold Heading Affects Cost

Cold heading has higher setup cost than simple machining because dies, punches, and process trials may be needed. But once the setup is correct, production speed is high and material waste is low.

That is why cold heading often offers the best unit cost for medium and large batches.

Cost Drivers

Pour les pièces basées sur des dessins, attaches personnalisées should be reviewed by process route before price comparison.

When Cold Heading Is the Right Choice

Cold heading is suitable when:

• The order quantity supports tooling cost.
• The material has enough ductility for forming.
• The shape can be made by die forming.
• Thread rolling is acceptable.
• Stable repeat production is expected.

It may not be the best choice for very small batches, very large diameters, deep complex cuts, sharp internal features, or materials that crack easily during forming.

RFQ Details Buyers Should Provide

Before asking for a quote, confirm:

• Drawing or standard
• Diameter, length, head type, and thread
• Matériau et qualité
• Required strength class
• Finition superficielle
• Quantity and annual demand
• Critical tolerances
• Rapports d'inspection
• Exigences en matière d'emballage et d'étiquetage

For coating choices after cold heading, buyers can review attaches enduites and confirm thread fit after finishing.

Conseil final

Cold heading can reduce cost and support strong, consistent fasteners when the part design, material, MOQ, and inspection plan match the process. It is not always the cheapest route for prototypes, but it is often the right route for repeat industrial orders.

Les acheteurs peuvent contacter XZ Fastener with drawings, material, grade, finish, quantity, and inspection requirements to evaluate whether cold heading is suitable before mass production.