fabricant d'attaches de remorque
XZ Fastener manufactures trailer fasteners for trailer builders, axle and suspension suppliers, repair kit distributors, agricultural trailer producers and heavy transport equipment buyers. Trailer assemblies often need reliable bolts, nuts, washers, screws and custom hardware for frames, couplers, ramps, hinges, wheel areas, landing legs, mudguards and lighting brackets. Orders can be supplied according to DIN, ISO, ASTM or buyer drawings, with material grade, coating, quantity, packaging and inspection documents confirmed before production. Matched bolt-nut-washer sets are available upon request.
Spécifications rapides
What Buyers Should Know Before Sourcing Trailer Fasteners
Trailer fasteners are used across structural, mechanical and accessory positions, so one trailer project may need several strength grades and surface finishes. Frame bolts, coupler hardware, spring hanger bolts, hinge fasteners and lighting bracket screws should not be mixed into one vague description. A clear bill of materials helps prevent grade mismatch and packing confusion.
Because trailers face road vibration, weather exposure, impact and repeated maintenance, buyers should review joint load, anti-loosening method and coating selection. For moving equipment, this guide on fixations pour chocs et vibrations is useful before finalizing a trailer hardware list.
Descriptions d'achat courantes
- Trailer frame bolts with nuts and flat washers packed by assembly position.
- Suspension bracket bolts, spring hanger bolts and axle mounting hardware.
- DIN 933 full thread hex bolts for brackets, guards and general trailer hardware.
- Grade 8.8 carbon steel hex bolts for structural frame and coupler assemblies.
- metric hex head bolts for trailer frames, ramps, hinges and mounting plates.
- zinc plated DIN 933 bolts for protected components and spare part kits.
- black oxide DIN 933 bolts for oil-protected machinery and workshop assemblies.
- hot dip galvanized DIN 933 bolts for outdoor trailers, utility frames and exposed supports.
- Custom fasteners made to drawing for trailer OEM and private-label service kits.
Tableau des spécifications détaillées
| Article | Options typiques | Notes de l'acheteur |
|---|---|---|
| Types de fixations | Hex bolts, flange bolts, carriage bolts, socket screws, self-tapping screws, nuts, washers, threaded rods and custom parts | Separate frame, axle, coupler, ramp and accessory hardware in the RFQ. |
| Normes | DIN 933, DIN 931, ISO 4017, ISO 4014, DIN 6923, DIN 985, ASTM, ASME and buyer drawings | Pour les boulons hexagonaux standard, les acheteurs peuvent comparer Boulons à tête hexagonale ISO 4017 and DIN full thread options. |
| Sujet | Métrique grossier, métrique fin, UNC, UNF, filetage complet, filetage partiel et longueur de filetage spéciale | Confirm pitch, nut type and coating allowance before production. |
| Gamme de tailles | Les tailles métriques et inch courantes peuvent être fournies selon les exigences de la commande | Envoyez le diamètre, la longueur, la longueur du filetage, le style de tête, la qualité, la finition et la quantité pour chaque ligne. |
| Classe de force | 4.8, 8.8, 10.9, 12.9, acier inoxydable A2 ou A4 et qualités spéciales disponibles sur demande | Higher strength should match joint design, nut grade and installation method. |
| Assemblages appariés | Bolt-nut-washer sets, lock nuts, flange nuts, flat washers, spring washers and labeled repair kits | Matched kits reduce sorting errors for trailer production lines and aftermarket service. |
| Documents | Rapport sur les matériaux, dureté, traction, inspection dimensionnelle, inspection du filetage et rapport de revêtement disponibles sur demande | Documents d’inspection d’État avant le début de la production. |
Explication du matériau et de la qualité
Trailer frame and coupler positions commonly use carbon steel Grade 8.8 or 10.9 fasteners, depending on design load and installation method. Lighter brackets, guards and accessory parts may use lower strength or stainless steel where corrosion exposure is the main concern. For axle, suspension and wheel-area hardware, buyers should confirm clamp load, fatigue risk and matching nut grade.
Material should be selected according to load, vibration, corrosion and service interval. For vehicle-related projects, this guide to vehicle fastener materials can help buyers compare carbon steel, alloy steel and stainless options.
Guide de sélection de finition de surface
Zinc plating is often selected for general trailer hardware and indoor storage conditions. Hot dip galvanizing is suitable for outdoor trailer frames, utility trailers and exposed steel assemblies, but thread fit should be checked. Black oxide or oil black finish can be used for protected assemblies. Dacromet, Geomet or PTFE coatings can be supplied when corrosion resistance or friction control is requested.
Lorsque les boulons, écrous et rondelles sont fournis ensemble, la compatibilité du revêtement doit être spécifiée comme un seul assemblage. Les acheteurs peuvent comparer les options courantes dans le guide de sélection de finition de surface.
Fabrication et contrôle qualité
Contrôle de production
XZ Fastener can manufacture standard and non-standard trailer fasteners according to order requirement. Production may include material preparation, cold forming, machining, heat treatment, thread rolling, coating, sorting and packing. For custom shoulder bolts, special carriage bolts, private-label repair kits or drawing-based components, buyers can use the attaches personnalisées service.
Points de contrôle
Common inspection points include material grade, dimensions, thread pitch, thread fit, hardness, tensile strength, coating thickness, surface condition, marking and packaging labels. For production-line supply, packing accuracy is as important as dimensional control. XZ Fastener’s processus de contrôle de la qualité des fixations explique les contrôles depuis la matière première jusqu'à l'emballage final.
Applications
- Utility trailers, cargo trailers, farm trailers and equipment transport trailers.
- Trailer frames, drawbars, couplers, safety chains, ramps, hinges and brackets.
- Axle mounts, suspension hangers, mudguards, lighting brackets and support plates.
- Repair kits for distributors, workshops and trailer service centers.
- OEM trailer production requiring consistent packing by workstation or assembly position.
- Outdoor trailers requiring zinc plated, hot dip galvanized or coated fasteners.
- Sacs de quincaillerie de marque privée fournis avec les étiquettes des clients et les marques de carton.
- Mixed fastener lists including bolts, nuts, washers, screws and custom components.
Comment obtenir un devis plus rapide
For trailer fasteners, send a size list with standard, diameter, length, thread pitch, thread length, head style, material grade, finish, quantity and packing method. If the fasteners are used for frame, axle, coupler, suspension or ramp positions, mark the application position in the file. Drawings, samples and photos help confirm non-standard parts.
For trailer OEM and distributor orders, include kit quantity, carton weight, pallet requirement, label format, inspection documents and delivery schedule. Buyers can use the Liste de contrôle de la demande de prix pour l'inspection et les tests des fixations avant d'envoyer une demande.
FAQ
Can XZ Fastener manufacture trailer fasteners according to drawings?
Yes. XZ Fastener can manufacture standard and custom trailer fasteners according to drawings, samples or detailed size lists. Buyers should provide material, grade, finish, quantity, tolerance and packing requirements.
What fasteners are commonly used for trailer production?
Common trailer fasteners include hex bolts, flange bolts, carriage bolts, nuts, flat washers, spring washers, lock nuts, self-tapping screws and custom hardware for frames, couplers, ramps, brackets and accessories.
Which finish is suitable for outdoor trailer fasteners?
Zinc plating and hot dip galvanizing are common for outdoor trailer hardware. Dacromet, Geomet, PTFE and stainless steel options can be considered when corrosion resistance or project-specific coating performance is required.
Can trailer fasteners be packed as bolt-nut-washer sets?
Yes. Bolt-nut-washer sets can be packed by size, assembly position, kit quantity or customer label. This is useful for trailer OEM production lines, spare part kits and distributor packaging.
How should buyers specify trailer frame bolts?
Buyers should provide standard, size, thread pitch, length, material grade, finish, nut and washer requirement, quantity, packing method and inspection documents. For structural positions, installation conditions should also be checked.
Can inspection documents be provided for trailer fastener orders?
Les documents d'inspection peuvent être fournis selon les exigences de la commande, y compris le rapport sur les matériaux, la dureté, la traction, l'inspection dimensionnelle, l'inspection des filetages et le rapport de revêtement. Les rapports requis doivent être répertoriés avant la production.
Send Your Trailer Fastener Inquiry
To prepare a practical quotation, send your size list, finish, quantity, packaging, and inspection requirements. For trailer frame bolts, axle hardware, coupler fasteners, ramp hardware, matched sets or custom parts, attach drawings, sample photos or assembly notes so XZ Fastener can check the details before production.
contacter XZ Fastener
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文