produsen baut alat berat
XZ Fastener manufactures and supplies heavy equipment bolts for excavators, loaders, cranes, mining machinery, agricultural machines, trailers, lifting equipment, and industrial maintenance programs. Buyers can source hex bolts, flange bolts, socket head cap screws, structural bolts, anchor bolts, threaded rods, nuts, and washers according to DIN, ISO, ASTM, ANSI, or custom drawings. Materials, grades, thread standards, heat treatment, surface finishes, marking, packaging, and inspection documents can be arranged according to order requirement. For high-load and vibration-prone machinery, XZ Fastener helps purchasing teams confirm grade, thread fit, coating, and assembly compatibility before production.
Standard high-strength bolts and custom heavy equipment fasteners can be quoted from drawings, samples, or size lists.
Spesifikasi Singkat
What Buyers Should Know Before Sourcing Heavy Equipment Bolts
Heavy equipment bolts are selected by load, vibration, fatigue risk, tightening method, mating material, and working environment. A purchasing list may include Grade 8.8 carbon steel hex bolts, 10.9 flange bolts, 12.9 socket head cap screws, structural bolts, wheel bolts, lock nuts, hardened washers, and custom machined parts. Buyers should confirm whether the bolt is for frame connection, bracket mounting, wear part replacement, hydraulic equipment, or engine-related assembly.
For application review, XZ Fastener provides guidance on pengencang terkena guncangan dan getaran, which is often relevant for construction and mining equipment.
Pemeriksaan sumber penting
- Confirm working load, vibration level, and whether the bolt is safety critical.
- Match bolt grade with nut proof strength and washer hardness.
- Check thread pitch, thread length, head style, and tightening access.
- Define coating requirements for outdoor, muddy, corrosive, or high-wear environments.
- Request inspection requirements before mass production and packing.
Deskripsi Pembelian Umum
Heavy equipment buyers may describe the same part in different ways: high tensile machinery bolts, excavator bolts, loader frame bolts, crane bolts, mining equipment bolts, tractor bolts, flange bolts for heavy machinery, Grade 10.9 metric bolts, Grade 12.9 socket bolts, and replacement bolt-nut-washer sets. Related purchasing lists may also include DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts.
For standard bolt categories, buyers can review XZ Fastener produk pengikat and compare high-strength options such as Grade 12.9 metric hex bolts.
Tabel Spesifikasi Detail
| Spesifikasi Barang | Opsi Umum | Catatan Pembeli |
|---|---|---|
| Jenis produk | Hex bolts, flange bolts, socket head cap screws, structural bolts, anchor bolts, wheel bolts, threaded rods, nuts, washers | Confirm whether the fastener is for OEM assembly, repair, or replacement stock. |
| Standar | DIN 931, DIN 933, ISO 4014, ISO 4017, ASTM, ANSI, JIS, GB, custom drawing | Provide the exact standard or drawing because head size, thread length, and tolerance can differ. |
| Benang | Metrik kasar, metrik halus, UNC, UNF, ulir penuh, ulir parsial, nada khusus | Thread pitch must match tapped holes, nuts, and field replacement parts. |
| Kisaran ukuran | Common metric and inch sizes according to standard, drawing, or sample | Large bolts may require heat treatment, special packing, and controlled inspection. |
| Bahan | Carbon steel, alloy steel, stainless steel 304, stainless steel 316, specified steel | Material should match load, fatigue risk, temperature, corrosion exposure, and cost target. |
| Kelas kekuatan | 8.8, 10.9, 12.9, B7, A2-70, A4-70, A4-80, custom mechanical requirement | High-strength bolts should be checked for hardness, tensile strength, and compatible assembly parts. |
| Permukaan akhir | Polos, berlapis seng, seng kuning, oksida hitam, hot dip galvanis, Dacromet, Geomet, fosfat | Finish affects corrosion resistance, assembly friction, thread fit, and service life. |
| Inspeksi | Dimensi, pengukur ulir, kekerasan, tarik, beban bukti, ketebalan lapisan, pemeriksaan visual, pemeriksaan pengepakan | Dokumen inspeksi dapat disiapkan sesuai dengan kebutuhan pesanan. |
Penjelasan Materi dan Kelas
Carbon steel and alloy steel are commonly used for heavy equipment bolts because they can be heat treated to meet higher strength levels. Grade 8.8 bolts are used in many machinery assemblies, while Grade 10.9 and 12.9 bolts may be selected where higher preload, compact design, or stronger clamp force is required. Stainless steel 304 or 316 can be used where corrosion resistance is more important than maximum tensile strength.
For high-load applications, buyers can review XZ Fastener’s panduan pemilihan pemasok untuk pengencang beban tinggi dan kekuatan tinggi before confirming final grade and testing requirements.
Panduan Pemilihan Permukaan Akhir
Oksida Hitam
Common for machinery bolts, socket head cap screws, and protected mechanical assemblies where a dark appearance and light oil protection are required.
Berlapis Seng
Suitable for general heavy equipment hardware, replacement bolts, brackets, covers, and assemblies requiring a clean finish and moderate corrosion protection.
Galvanis Celup Panas
Used for outdoor machinery frames, trailers, structural supports, and exposed assemblies. Thread allowance should be checked due to thicker coating.
Dacromet atau Geomet
Zinc flake coatings can be considered for high-corrosion environments where controlled coating thickness and improved durability are needed.
Fosfat
Used for certain mechanical assemblies, especially where oil retention or additional post-treatment is requested by the buyer.
Polos atau Diminyaki
Suitable for protected storage, internal equipment use, or parts that will receive further processing. Confirm corrosion expectations before selection.
Untuk perbandingan akhir, pembeli dapat meninjau grafik perbandingan permukaan akhir before selecting coating and salt spray requirements.
Manufaktur dan Kontrol Kualitas
Heavy equipment bolt production should control raw material, cold heading or machining, thread rolling, heat treatment, surface treatment, marking, inspection, and packing. For high-strength bolts, hardness, tensile strength, proof load, thread accuracy, head dimensions, and surface condition are important. When fasteners are used in vibration-prone equipment, thread fit, washer matching, and tightening method should be reviewed with the buyer’s engineering or maintenance team.
For additional quality planning, XZ Fastener provides guidance on bolt fatigue and vibration selection dan persyaratan torsi untuk pengencang mesin.
Aplikasi
- Excavator, loader, bulldozer, crane, and mining machinery assemblies
- Agricultural equipment, trailers, attachments, and replacement hardware
- Equipment frames, brackets, guards, base plates, and structural supports
- Hydraulic component mounting, engine covers, and mechanical sub-assemblies
- Outdoor machinery using hot dip galvanized or zinc flake coated fasteners
- High-vibration assemblies requiring lock nuts, washers, and controlled tightening
- Custom bolts produced from drawings, samples, or OEM specifications
Custom equipment parts
For non-standard shoulder length, special head style, left-hand thread, drilled hole, longer shank, or custom marking, XZ Fastener can support pengencang khusus sesuai dengan gambar, sampel, atau persyaratan pesanan.
Cara Mendapatkan Penawaran Lebih Cepat
To quote heavy equipment bolts accurately, send the standard, diameter, length, thread pitch, thread length, head style, material, grade, finish, quantity, packing method, and inspection requirements. If the bolt is used in a critical assembly, include working load, tightening method, washer or nut requirement, and whether replacement interchangeability is required.
Untuk penanganan cepat, kirimkan pertanyaan Anda melalui meminta penawaran atau hubungi XZ Fastener dengan gambar, foto, daftar ukuran, hasil akhir, kuantitas, pengemasan, dan persyaratan inspeksi.
FAQ
Can XZ Fastener supply Grade 10.9 and Grade 12.9 heavy equipment bolts?
Yes. Grade 10.9 and Grade 12.9 bolts can be supplied according to standard, drawing, or order requirement. Matching nuts, washers, coating, and inspection requirements should be confirmed together.
Which bolt finish is suitable for outdoor heavy equipment?
Hot dip galvanized, Dacromet, Geomet, zinc plated, black oxide with oil, or stainless steel may be considered depending on exposure, thread fit, corrosion expectation, and service life requirement.
Can heavy equipment bolts be made from samples?
Yes. Samples can be reviewed for dimensions, thread pitch, material, grade, finish, and special features. A drawing is recommended before mass production to reduce tolerance risk.
What inspection items should be requested for heavy equipment bolts?
Common inspection items include dimension check, thread gauge, hardness, tensile strength, proof load, coating thickness, visual appearance, marking, nut fit, and packing records.
Can bolts be supplied with nuts and washers as assembly kits?
Yes. Bolts, nuts, washers, and lock washers can be packed as sets according to size, grade, finish, and installation requirement.
Informasi apa yang diperlukan untuk kutipan lebih cepat?
Please send the size list, finish, quantity, packaging, inspection requirements, standard or drawing, material grade, thread pitch, and any special assembly or marking requirements.
Send Your Heavy Equipment Bolt Inquiry
Send your size list, finish, quantity, packaging, and inspection requirements to XZ Fastener. Drawings, sample photos, material grade, thread pitch, nut and washer matching details, coating specification, destination country, and delivery schedule will help prepare a faster and more accurate quotation.
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文