Pabrik sekrup flensa kepala tombol ISO 7380-2
XZ Fastener manufactures ISO 7380-2 button head flange screws for buyers who need a low-profile rounded head, integrated bearing flange, and reliable hex socket drive for machinery and assembly lines. These metric button head screws with flange are used on covers, guards, brackets, housings, automation equipment, and visible mounting points where load distribution and appearance both matter. Alloy steel, carbon steel, and stainless steel options can be supplied with property class, thread length, surface finish, packing, and inspection documents according to order requirement. Send size lists, drawings, finish targets, and quantity plans for factory quotation review.
Spesifikasi Singkat
Yang Harus Diketahui Pembeli Sebelum Membeli Sekrup Flange Kepala Tombol ISO 7380-2
ISO 7380-2 button head flange screws are metric hex socket screws with a rounded low-profile head and an integrated collar or flange under the head. The flange increases bearing area and can reduce the need for a separate washer in selected assemblies, but buyers should still check seating surface, clamp load, tool access, and head clearance before confirming production.
This product is often sourced with other pengencang standar for machinery and equipment projects. Buyers should clearly separate ISO 7380-2 flange screws from ISO 7380-1 button head screws without flange because head geometry and installation behavior are not the same.
Catatan Sumber Pabrik
- Confirm the exact ISO 7380-2 requirement, size, pitch, length, and flange dimensions.
- State whether the screw needs full thread, partial thread, or drawing-based thread length.
- Define socket depth, socket fit, head appearance, and burr control for visible assemblies.
- Provide packing, carton quantity, label format, and inspection requirements before production.
Deskripsi Pembelian Umum
Purchasing teams may describe this item as ISO 7380-2 button head flange screws, hex socket button head screws with collar, metric button head flange screws, button head Allen flange screws, or low-profile socket screws with flange. For accurate factory quotation, the inquiry should include size, material, property class, finish, quantity, drawing if available, and packing method.
Project purchasing lists often combine several metric fastener types. Along with ISO 7380-2 flange screws, buyers may also source DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts. Related baut industri can be quoted together when an assembly requires both socket screws and hex head fasteners.
Tabel Spesifikasi Detail
| Barang | Persyaratan Khas | Catatan Pengadaan |
|---|---|---|
| Standar | ISO 7380-2 | Hexagon socket button head screws with collar or flange; confirm drawing when dimensions are critical. |
| Kisaran Diameter | Ukuran metrik umum seperti M3 hingga M16 | Ukuran lainnya dapat ditinjau sesuai kebutuhan pesanan dan ketersediaan produksi. |
| Benang | Benang kasar metrik, opsi benang halus yang dipilih | Thread pitch and thread length should be clearly stated in the inquiry. |
| Kepala dan Flensa | Kepala kancing bulat dengan flensa terintegrasi | Confirm head diameter, flange diameter, flange thickness, and seating surface requirements. |
| Berkendara | Soket hex internal | Socket depth, socket concentricity, and tool fit are important for repeated assembly use. |
| Bahan | Baja paduan, baja karbon, baja tahan karat A2/A4 | Material should match strength, corrosion, and cost requirements. |
| Permukaan Selesai | Oksida hitam, berlapis seng, berlapis nikel, polos, tahan karat pasif | Finish selection should match environment, appearance, and storage conditions. |
| Pengepakan | Kotak kecil, karton bagian dalam, karton ekspor, kemasan palet | Buyer labels, barcode labels, and mixed-size packing plans are available upon request. |
For modified flange diameter, special head height, non-standard length, or drawing-based parts, XZ Fastener can review pengencang khusus sesuai dengan gambar dan kebutuhan pesanan.
Penjelasan Materi dan Kelas
Baja Paduan dan Baja Karbon
Alloy steel and carbon steel ISO 7380-2 button head flange screws are commonly used when mechanical strength, repeat assembly performance, and controlled cost are important. Property classes such as 8.8 and 10.9 can be discussed according to application requirements. Heat treatment, hardness, thread accuracy, and coating should be confirmed before production.
Baja Tahan Karat A2 dan A4
Stainless steel A2 and A4 options are suitable for equipment panels, light outdoor use, moisture-exposed assemblies, and applications where clean appearance is important. A4 stainless steel can be considered where stronger corrosion resistance is required. Passivation and clean packing can be supplied according to order requirement.
Saat pembeli membandingkan sekrup flensa ISO 7380-2 dengan yang lain produk pengikat, they should evaluate head clearance, bearing area, tool access, assembly torque, and whether a separate washer is still required by the design.
Panduan Pemilihan Permukaan Akhir
| Selesai | Penggunaan Khas | Pertimbangan Pembeli |
|---|---|---|
| Oksida Hitam | Mesin, perkakas, perlengkapan, rakitan dalam ruangan | Provides dark appearance; oil protection and carton lining should be confirmed for storage. |
| Berlapis Seng | Majelis industri umum dan stok distributor | Umum untuk sekrup baja karbon; nada warna dan target korosi dapat didiskusikan. |
| Berlapis Nikel | Perangkat keras yang terlihat dan tampilan aplikasi yang terkontrol | Berguna jika diperlukan hasil akhir yang lebih cerah; periksa lingkungan instalasi sebelum memilih. |
| Fosfat | Komponen industri membutuhkan retensi minyak | Often paired with protective oil; packaging should reduce moisture exposure. |
| Polos Stainless atau Pasif | Rakitan tahan karat dan peralatan yang tahan lembab | Pasifasi dapat diminta untuk meningkatkan kebersihan dan konsistensi permukaan. |
For orders involving multiple finishes or matched assemblies, XZ Fastener can also supply pengencang berlapis sesuai dengan kebutuhan proyek.
Manufaktur dan Kontrol Kualitas
Factory control for ISO 7380-2 button head flange screws should cover wire material, cold heading, flange forming, socket forming, thread rolling, heat treatment when applicable, surface treatment, sorting, and final packing. Important inspection points include head diameter, head height, flange diameter, flange thickness, socket depth, socket fit, thread accuracy, overall length, hardness, and finish appearance.
For visible assemblies, burr control, head marks, coating consistency, and packing protection are especially important. Buyers preparing technical files can refer to the Panduan standar pengikat DIN dan ISO when confirming standard references and product descriptions.
Aplikasi
- Penutup mesin, panel akses, dan pelindung
- Peralatan otomasi, kerangka robotika, dan sistem perlengkapan
- Braket, pelat pemasangan, rumah, dan rangka peralatan
- Visible assemblies where a low-profile head and wider bearing area are useful
- Maintenance kits, service parts, and factory assembly programs
The integrated flange can help distribute load across the bearing surface, but the final decision should follow the assembly design. When matching components are needed, XZ Fastener can also quote related mesin cuci datar dan kacang industri untuk daftar pembelian lengkap.
Cara Mendapatkan Penawaran Lebih Cepat
To receive a faster quotation, send diameter, pitch, length, material, property class, finish, quantity per size, drawing if available, packing method, label format, and required inspection documents. For ISO 7380-2 screws, it is also useful to confirm flange diameter, flange thickness, socket size, head appearance requirement, and whether the screw will be used on a painted or plated surface.
Untuk dimensi khusus, detail flensa non-standar, atau kemasan khusus pembeli, XZ Fastener’s layanan yang disesuaikan dapat meninjau permintaan sesuai dengan gambar dan persyaratan pesanan. Pembeli bisa hubungi XZ Fastener dengan daftar ukuran dan rencana kuantitas untuk dukungan kutipan pabrik.
FAQ
Apa perbedaan antara sekrup ISO 7380-2 dan ISO 7380-1?
ISO 7380-2 refers to button head socket screws with a collar or flange, while ISO 7380-1 is commonly used for button head socket screws without the same flange form. Buyers should confirm the required standard and drawing before ordering.
Can ISO 7380-2 button head flange screws be supplied in alloy steel?
Yes. Alloy steel options can be supplied according to property class, finish, size, and order requirement. Heat treatment and hardness requirements should be confirmed before production.
Are stainless steel ISO 7380-2 flange screws available?
Stainless steel A2 and A4 options are available upon request. Buyers should provide corrosion requirements, finish expectations, and packing requirements for quotation review.
Does the flange replace a washer?
The integrated flange increases bearing area and may reduce the need for a separate washer in selected applications. However, the final decision should follow the assembly design, surface material, and load requirement.
What inspection items are important for ISO 7380-2 screws?
Common inspection items include head diameter, head height, flange diameter, flange thickness, socket depth, thread accuracy, overall length, hardness, coating appearance, and packing verification.
Can ISO 7380-2 flange screws be packed with other fasteners?
Yes. ISO 7380-2 screws can be packed with bolts, nuts, washers, and other fasteners according to buyer instructions. Separate labels and item-level packing details help improve receiving control.
Send Your ISO 7380-2 Button Head Flange Screws Inquiry
For a faster quotation, send your size list, finish, quantity, packaging, and inspection requirements. Please include material grade, property class, thread details, flange dimensions, carton quantity, label format, drawings, and any sample reference needed for factory review.
hubungi XZ Fastener
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文