produsen baut perancah
XZ Fastener manufactures scaffolding bolts for tube clamp systems, couplers, base plates, ledger connections, braces, stair towers, working platforms and temporary construction structures. Scaffolding hardware often requires stable tightening, repeatable assembly, clean thread engagement and finishes suitable for outdoor jobsite exposure. Bolts, nuts and washers can be supplied according to DIN, ISO, ASTM, EN, GB, buyer samples or drawings, with material grade, coating, quantity, packaging and inspection requirements confirmed before production. Matched fastener sets are available for distributors, rental fleets, scaffold manufacturers and construction project buyers.
Minta Penawaran
Spesifikasi Singkat
What Buyers Should Know Before Sourcing Scaffolding Bolts
Scaffolding bolts are used in equipment that is assembled, adjusted, dismantled and reused many times. Buyers should separate coupler bolts, frame bolts, base plate bolts, guardrail connection bolts, brace bolts and platform hardware before sending an inquiry. XZ Fastener supplies a broad range of produk pengikat that can be matched to scaffold components, rental fleet repair lists and construction project bills of material.
For construction sites, the same bolt may face outdoor exposure, repeated tightening, vibration during handling and impact from transport. Procurement teams should confirm bolt grade, nut fit, washer design, coating and packing method together. For broader construction fastening decisions, buyers can review XZ Fastener’s guide to pengencang untuk proyek konstruksi.
Deskripsi Pembelian Umum
- Scaffolding coupler bolts with nuts and washers
- Scaffold clamp bolts for tube and clamp systems
- Galvanized scaffold bolts for outdoor construction sites
- Scaffolding frame bolts and brace connection bolts
- Custom scaffold hardware bolts according to drawing or sample
- DIN 933 full thread hex bolts for general scaffold fastening
- Grade 8.8 carbon steel hex bolts for higher strength scaffold assemblies
- baut kepala hex metrik dikemas berdasarkan ukuran dan kebutuhan proyek
- baut DIN 933 berlapis seng, baut DIN 933 oksida hitam dan baut DIN 933 galvanis hot dip
For projects requiring standard full-thread metric bolts, buyers may compare dimensions and finish options with DIN 933 baut hex ulir penuh before confirming the final scaffolding bolt list.
Tabel Spesifikasi Detail
| Barang | Opsi yang Tersedia | Catatan Pengadaan |
|---|---|---|
| Jenis Produk | Hex bolts, carriage bolts, flange bolts, eye bolts, clamp bolts, nuts, washers, special scaffold hardware | Can be supplied as individual parts or matched assemblies according to order requirement. |
| Rentang Ukuran | Ukuran metrik dan inch tersedia berdasarkan permintaan | Please provide diameter, length, thread pitch, head type, shank details and quantity. |
| Standar | DIN 933, ISO 4017, DIN 603, DIN 6921, ASTM, EN, GB, JIS, custom drawing | Standard and non-standard scaffold bolts should be confirmed against the actual coupler or frame design. |
| Kelas Kekuatan | 4.8, 8.8, 10.9, 12.9, A2-70, A4-70, custom requirement | Grade should follow the scaffold component design and buyer specification. |
| Bahan | Baja karbon, baja paduan, baja tahan karat | Carbon steel with protective coating is common for scaffold hardware; stainless steel can be considered for corrosive environments. |
| Permukaan Selesai | Polos, berlapis seng, seng kuning, oksida hitam, hot dip galvanis, Dacromet, Geomet | Finish should consider outdoor exposure, thread fit, reuse frequency and storage conditions. |
| Pengepakan | Bulk cartons, bags, small boxes, pallets, project kits, buyer label | Mixed-size packing can be arranged by scaffold component or installation sequence. |
| Inspeksi | Dimensi, kesesuaian benang, kekerasan, uji tarik, ketebalan lapisan, pencocokan perakitan | Dokumen inspeksi tersedia berdasarkan permintaan sebelum konfirmasi pesanan. |
Penjelasan Materi dan Kelas
Scaffolding bolts are commonly produced from carbon steel or alloy steel because these materials provide practical strength and stable cold-forming performance. Class 8.8 may be selected for stronger clamp or frame connections, while lower grades may be suitable for light-duty accessories when approved by the buyer. The nut grade, washer size and thread engagement should be reviewed together with the bolt grade.
Many scaffold components use special bolt heads, square necks, T-heads, eye shapes or shank dimensions that are not fully covered by common standards. For these items, XZ Fastener can manufacture pengencang khusus according to confirmed drawings or samples. Buyers should provide dimensional tolerances, material grade, coating, marking and packing details for review.
Panduan Pemilihan Permukaan Akhir
Scaffolding bolts used outdoors often require zinc plating, hot dip galvanizing or zinc-flake coating, depending on exposure level, service life and cost target. Zinc plated scaffold bolts are common for general use and clean appearance. Hot dip galvanized bolts provide heavier zinc coverage and are often selected for outdoor scaffolding, coastal projects or long storage periods.
Black oxide is mainly used where a dark appearance and light oil protection are required; it is not normally selected for heavy outdoor corrosion resistance. Dacromet and Geomet coatings can be supplied for specific corrosion or assembly requirements. Buyers can compare coating choices in XZ Fastener’s panduan pemilihan permukaan akhir.
Manufaktur dan Kontrol Kualitas
Scaffolding bolt production may include raw material inspection, cold heading, trimming, thread rolling, heat treatment when required, surface treatment, dimensional inspection, thread fit checking and packing verification. Because scaffold parts are often reused, consistent thread quality, coating adhesion and nut compatibility help reduce assembly problems in the field.
Inspection can be arranged according to order requirement, including dimensional reports, hardness checks, tensile testing, coating thickness checks and sample approval. Buyers who need material and grade traceability can review persyaratan sertifikat uji baut, sedangkan detail kontrol produksi dijelaskan dalam panduan XZ Fastener’ untuk kontrol kualitas pengikat selama produksi.
Aplikasi
Scaffold Systems and Components
Scaffolding bolts are used for clamps, couplers, ledger connections, frame joints, base plates, braces, platform supports, guardrails, ladder brackets and stair tower assemblies.
Construction, Rental and Maintenance Supply
Bolts, nuts and washers can be supplied for scaffold manufacturers, construction contractors, rental fleet maintenance, building repair projects, temporary platforms and industrial plant access systems.
Cara Mendapatkan Penawaran Lebih Cepat
A complete inquiry helps XZ Fastener confirm manufacturability, material, coating, packing and inspection scope. Please include:
- Bolt standard, drawing, sample photo or current purchasing description
- Diameter, panjang, jarak ulir, gaya kepala, jenis leher, dan kebutuhan mesin cuci
- Kelas material, kelas kekuatan, dan permukaan akhir
- Kuantitas berdasarkan ukuran dan jadwal pengiriman yang diharapkan
- Metode pengemasan, persyaratan label dan persyaratan palet
- Dokumen inspeksi, persyaratan ketebalan lapisan dan kebutuhan persetujuan sampel
FAQ
Can XZ Fastener manufacture scaffolding bolts according to drawings?
Yes. Scaffolding bolts can be manufactured according to buyer drawings, samples or confirmed technical descriptions. Please provide dimensions, grade, finish, quantity and inspection requirements.
Which finish is suitable for outdoor scaffolding bolts?
Hot dip galvanized, zinc plated, Dacromet or Geomet finishes may be considered depending on exposure, reuse frequency, storage conditions and buyer specification.
Can scaffolding bolts be supplied with nuts and washers?
Ya. Baut, mur, dan ring dapat dipasok sebagai rakitan yang sesuai dengan ukuran, kualitas, pelapisan, dan kebutuhan pengemasan.
Do you supply special scaffold clamp bolts?
Special head shapes, square necks, T-heads, eye bolts and non-standard shank dimensions can be reviewed according to drawings or samples.
What information is needed for bulk scaffolding bolt orders?
Silakan kirim daftar ukuran, hasil akhir, kuantitas, metode pengemasan, persyaratan inspeksi dan gambar proyek atau foto sampel yang ada.
Can scaffolding bolts be packed for rental fleet maintenance?
Yes. Packing can be arranged by size, component type, repair kit or buyer label according to order requirement.
Send Your Scaffolding Bolt Inquiry
To receive a faster quotation, send your size list, finish, quantity, packaging method and inspection requirements. Drawings, samples, current purchase descriptions or photos of existing scaffolding bolts are helpful for confirming the correct fasteners before production.
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文