Русский 
English 
Español 
Tiếng Việt 
العربية DIN 975 threaded rods exporter
XZ Fastener exports DIN 975 threaded rods for distributors, construction buyers, MEP contractors, OEM stock programs, and industrial maintenance supply. Export orders need more than correct thread size. Buyers also need stable material grade, clear finish control, export packing, accurate labels, and documents that match the purchase order. DIN 975 rods can be supplied in common 1 m, 2 m, and 3 m lengths, with cut lengths available according to order requirement. Carbon steel, alloy steel, and stainless steel options are available for different load and corrosion conditions.
![DIN 975 threaded rods exporter product illustration](data:image/svg+xml,%3Csvg xmlns="http://www.w3.org/2000/svg" width="1200" height="760" viewBox="0 0 1200 760"%3E%3Crect width="1200" height="760" fill="%23eef4fa"/%3E%3Crect x="84" y="82" width="1032" height="596" rx="28" fill="%23ffffff" stroke="%23b8c9d9" stroke-width="4"/%3E%3Cg transform="translate(155 190)"%3E%3Crect x="70" y="126" width="760" height="78" rx="18" fill="%237b8793"/%3E%3Cg fill="%23d7e1eb"%3E%3Crect x="100" y="130" width="18" height="70"/%3E%3Crect x="144" y="130" width="18" height="70"/%3E%3Crect x="188" y="130" width="18" height="70"/%3E%3Crect x="232" y="130" width="18" height="70"/%3E%3Crect x="276" y="130" width="18" height="70"/%3E%3Crect x="320" y="130" width="18" height="70"/%3E%3Crect x="364" y="130" width="18" height="70"/%3E%3Crect x="408" y="130" width="18" height="70"/%3E%3Crect x="452" y="130" width="18" height="70"/%3E%3Crect x="496" y="130" width="18" height="70"/%3E%3Crect x="540" y="130" width="18" height="70"/%3E%3Crect x="584" y="130" width="18" height="70"/%3E%3Crect x="628" y="130" width="18" height="70"/%3E%3Crect x="672" y="130" width="18" height="70"/%3E%3Crect x="716" y="130" width="18" height="70"/%3E%3Crect x="760" y="130" width="18" height="70"/%3E%3C/g%3E%3Crect x="42" y="102" width="62" height="126" rx="10" fill="%230b2f57"/%3E%3Crect x="810" y="102" width="62" height="126" rx="10" fill="%230b2f57"/%3E%3Crect x="105" y="276" width="730" height="50" rx="12" fill="%23123f6d"/%3E%3Crect x="170" y="354" width="560" height="36" rx="8" fill="%23b8c9d9"/%3E%3C/g%3E%3Ctext x="600" y="632" text-anchor="middle" font-family="Arial, Helvetica, sans-serif" font-size="34" font-weight="700" fill="%230b2f57"%3EDIN 975 Threaded Rods%3C/text%3E%3C/svg%3E)
Quick Specs
| Стандарт | DIN 975 metric threaded rods, full thread; DIN 976 comparison can be confirmed when required by project documents |
|---|---|
| Strength | Common classes include 4.8, 5.8, 8.8, and 10.9; stainless A2-70 and A4-70 can be supplied according to order requirement |
| Материал | Carbon steel, medium carbon steel, alloy steel, stainless steel 304/A2, stainless steel 316/A4 |
| Finish | Plain, zinc plated, black oxide, hot dip galvanized, zinc flake, passivated stainless steel |
| Приложение | Construction supports, MEP installation, pipe hangers, anchor assemblies, machinery, maintenance stock, and general fastening |
Export buyers can compare DIN 975 rods with other standard fasteners and prepare combined purchasing lists for rods, nuts, washers, and related bolt items.
What Buyers Should Know Before Sourcing DIN 975 Threaded Rods
Confirm the Standard Wording
DIN 975 is still common in distributor catalogs and international purchase orders. Some projects now reference DIN 976 for threaded rods, so buyers should confirm the accepted wording before production and document preparation.
If matching industrial nuts are required, nut grade, finish, and thread fit should be reviewed with the rod specification, especially for galvanized assemblies.
Export Packing Matters
Threaded rods are long, heavy, and easy to damage during ocean freight if packing is weak. Export packing should protect the thread, reduce bending risk, and keep labels readable after warehouse handling.
Buyers sourcing mixed shipments can review XZ Fastener’s fastener products to align rod orders with bolts, washers, anchors, and other project hardware.
Common Purchasing Descriptions
Clear descriptions help avoid mistakes in quotation, inspection, export documents, and customs review. Use one line for each diameter, length, grade, and finish.
| Purchasing Description | Typical Use | Buyer Note |
|---|---|---|
| DIN 975 threaded rod, M10 x 1000 mm, Class 4.8, zinc plated | General support hardware and distributor stock | Confirm carton, bundle, and pallet label format |
| DIN 975 threaded rod, M12 x 3000 mm, Class 8.8, plain finish | Fabrication, machinery, and cut-to-length stock | Confirm straightness, anti-rust protection, and certificate needs |
| DIN 975 threaded rod, M16 x 1000 mm, hot dip galvanized | Outdoor support systems and exposed construction hardware | Check matching nut fit after galvanizing |
| DIN 975 stainless steel threaded rod, M8 x 1000 mm, A4-70, passivated | Marine, washdown, and corrosive indoor environments | State A2 or A4 clearly on all export documents |
| DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts | Related bolt stock for metric fastener importers | Keep bolts and rods as separate invoice lines |
| Zinc plated DIN 933 bolts, black oxide DIN 933 bolts, hot dip galvanized DIN 933 bolts | Matching coated bolt inventory | Use consistent finish wording across the order |
When standard names are unclear, buyers can review the DIN and ISO fastener standards guide before confirming the final purchasing description.
Detailed Specifications Table
| Specification Item | Common Options | Export Order Checkpoint |
|---|---|---|
| Стандарт | DIN 975; DIN 976 reference available for comparison | Confirm the exact standard required by PO, drawing, or project file |
| Diameter | M3 to M36 commonly requested; other sizes available upon request | List each diameter separately for packing and invoice control |
| Length | 1000 mm, 2000 mm, 3000 mm, or custom cut length | Define tolerance, cut-end condition, and packing method |
| Thread | Metric coarse thread; metric fine thread available upon request | Confirm pitch, gauge inspection, and nut assembly requirement |
| Grade | 4.8, 5.8, 8.8, 10.9, A2-70, A4-70 | Match grade with certificate and shipment documents |
| Finish | Plain, zinc plated, black oxide, hot dip galvanized, zinc flake, passivated | Confirm coating appearance and thread function after finishing |
| Packing | Bundles, cartons, woven bags, pallets, or customer-labeled packing | Separate by size, length, grade, finish, and batch |
| Documents | Commercial invoice, packing list, certificate of origin, material certificate, inspection report when required | Keep descriptions consistent across all export paperwork |
Material and Grade Explanation
Carbon Steel and Alloy Steel
Class 4.8 DIN 975 threaded rods are commonly used for general fastening, light-duty supports, and distributor inventory. Class 8.8 and 10.9 rods are selected for higher-strength assemblies where tensile performance and thread consistency are more important.
For demanding assemblies, buyers may compare DIN 975 rods with related high-strength fasteners and confirm that the nut grade and washer hardness are suitable for the joint.
Stainless Steel Options
A2 stainless steel is often selected for clean indoor and general corrosion-resistant applications. A4 stainless steel, commonly tied to 316 material, is preferred for coastal exposure, wet areas, and chemical moisture.
Stainless steel export orders should define material, strength class, finish, and packing protection. Carbon steel contamination should be avoided during handling and palletizing.
Surface Finish Selection Guide
The finish affects corrosion resistance, storage life, appearance, thread fit, and import inspection. For export supply, finish wording should match the quotation, purchase order, invoice, packing list, and inspection document.
| Finish | Typical Use | Export Comment |
|---|---|---|
| Plain | Indoor fabrication or parts requiring later coating | Needs anti-rust oil or protected packing for ocean freight |
| Zinc Plated | General indoor hardware and light-duty construction use | Common option for clean appearance and moderate protection |
| Black Oxide | Machinery and indoor assemblies requiring dark appearance | Limited corrosion protection unless oiled or sealed |
| Hot Dip Galvanized | Outdoor support systems and exposed construction hardware | Coating thickness can affect thread fit; matching nuts should be confirmed |
| Zinc Flake | Higher corrosion resistance with controlled coating build | Available upon request for defined project requirements |
| Passivated Stainless | Stainless rods used in corrosive or clean environments | Pack carefully to avoid contamination and surface damage |
Buyers comparing surface treatments can review XZ Fastener’s coated fasteners for related finish planning.
Manufacturing and Quality Control
DIN 975 threaded rods are commonly produced by preparing steel material, forming continuous threads, cutting or sorting to length, cleaning, applying finish when required, and packing by item code. Export orders should include both production checks and document checks before shipment release.
- Confirm raw material grade and heat number where traceability is required.
- Check outside diameter, thread pitch, full-thread condition, and usable length.
- Inspect straightness, cut-end burrs, chamfer, and visible surface defects.
- Use thread gauges or mating nuts to confirm functional fit.
- Review coating appearance, rust protection, and post-coating thread function.
- Separate rods by size, length, grade, finish, batch, and packing label.
- Verify carton, bundle, pallet, invoice, packing list, and certificate consistency before shipment.
For cut lengths, customer labels, project packing, or drawing-based changes, XZ Fastener can discuss the required customized service before production.
Приложения
Construction and MEP Support
DIN 975 threaded rods are used for ceiling suspension, pipe supports, cable trays, ductwork, brackets, anchor connections, and general construction hardware. Buyers often combine rods with flat washers and hex nuts for complete installation supply.
OEM and Maintenance Stock
Equipment builders and maintenance teams use threaded rods for spacing, clamping, adjustment, repair, and fixture work. In export supply, clear labels and strong packing help reduce warehouse sorting time after arrival.
How to Get a Faster Quotation
A complete export request helps the supplier quote the correct rod, prepare packing volume, and avoid repeated clarification before shipment.
- Standard: DIN 975, DIN 976, or drawing requirement if modified.
- Diameter and pitch: for example, M10 coarse thread or M12 fine thread.
- Length: 1000 mm, 2000 mm, 3000 mm, or custom cut length.
- Grade and material: 4.8, 8.8, 10.9, A2-70, A4-70, or other specified material.
- Finish: plain, zinc plated, black oxide, hot dip galvanized, zinc flake, or passivated.
- Quantity: pieces, bundles, cartons, pallets, or container quantity.
- Packing: bundle weight, carton requirement, pallet marking, bar code label, or customer label.
- Inspection: certificate, gauge check, coating report, or third-party inspection if required.
- Export details: destination port, trade term, shipping mark, and document requirements.
Часто задаваемые вопросы
What is a DIN 975 threaded rod?
A DIN 975 threaded rod is a metric rod with external thread along the full length. It is used for fastening, spacing, suspension, anchoring, and assembly work where a standard bolt length is not suitable.
Is DIN 975 the same as DIN 976?
Many buyers still use DIN 975 in purchase orders, while DIN 976 is also commonly referenced for threaded rods. Buyers should confirm which standard wording is required by the drawing, project specification, or end customer.
What lengths are commonly exported?
Common export lengths are 1000 mm, 2000 mm, and 3000 mm. Custom cut lengths can be supplied according to order requirement, but length tolerance and cut-end condition should be confirmed before production.
Which grades are available for DIN 975 threaded rods?
Common carbon steel grades include 4.8, 5.8, 8.8, and 10.9. Stainless steel A2-70 and A4-70 can be supplied for corrosion-resistant applications. Special material requirements should be confirmed before production.
Can hot dip galvanized threaded rods have nut fit problems?
Yes. Hot dip galvanizing adds coating thickness to the thread. Buyers should confirm mating nuts and thread fit after galvanizing, especially for larger diameters and field-installed assemblies.
What export documents should buyers prepare for DIN 975 rods?
Common documents include commercial invoice, packing list, bill of lading, certificate of origin when required, material certificate, and inspection report. The product description should match across all documents.
Send Your DIN 975 Threaded Rod Export Requirement
For a faster and more accurate quotation, send your size list, finish, quantity, packaging method, and inspection requirements. Include grade, length, thread pitch, certificate needs, shipping marks, destination port, and whether matching nuts or washers are required.
Contact XZ Fastener