304不锈钢螺纹杆厂
XZ Fastener manufactures 304 stainless steel threaded rods for buyers who need corrosion-resistant continuous-thread fastening in machinery, construction hardware, pipe supports, equipment installation, and general stainless assemblies. Factory supply can be reviewed for metric sizes, UNC/UNF options, full-length rods, cut lengths, chamfered ends, plain or passivated surface, carton packing, pallet packing, and inspection requirements. 304 stainless steel, commonly specified as A2 stainless steel, is selected for general corrosion resistance and clean appearance. Buyers can combine rods with related 紧固件产品 用于安装套件、维护库存、分销商计划和基于项目的采购。
快速规格
买家在采购 304 不锈钢螺纹杆之前应了解什么
304 stainless steel threaded rods are used when adjustable installation length, continuous thread engagement, and general corrosion resistance are required. Buyers should confirm rod diameter, thread pitch, total length, cut-to-length tolerance, end chamfer, straightness, surface condition, and packing method. For non-standard lengths, special thread sections, machined ends, or project-specific assemblies, XZ Fastener can review 定制紧固件 根据图纸或样品。
Factory purchasing often includes related nuts, washers, anchors, and bolts in the same package. If the project includes mixed materials, threaded rods can be quoted together with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts for a broader fastener supply plan.
常见采购说明
- 304 不锈钢螺纹杆，DIN 976，公制粗牙螺纹，全长。
- A2 不锈钢螺纹杆，M6 至 M30，长度一米或三米，光面。
- 304 stainless cut threaded studs with chamfered ends and protective packing.
- ASTM F593不锈钢螺纹杆，带UNC或UNF螺纹，长度根据订单要求。
- 螺杆配有配套螺母， 平垫圈，以及需要时的锚固硬件。
详细规格表
| 项目 | 典型选项 | 买家须知 |
|---|---|---|
| 产品类型 | 全长螺杆、切削螺杆、特殊加工螺杆 | 确认是否需要全库存长度或定长切割供应。 |
| 直径范围 | 可以查看M4到M36等公制尺寸；可根据要求提供英制螺纹 | 可用性取决于材料、螺纹形式和订单数量。 |
| 线程 | 公制粗牙、公制细牙、UNC、UNF | 清楚地注明螺纹螺距，特别是对于细牙或英制螺纹项目。 |
| 长度 | 一米、两米、三米，或根据订单要求切割长度 | 生产前应规定切割长度公差和端部倒角。 |
| 材质 | 304 不锈钢 / A2 不锈钢 | 材料确认应与图纸、应用环境、采购说明相符。 |
| 表面 | Plain, passivated, cleaned, polished, waxed | Surface request should match corrosion, handling, and appearance needs. |
| 检查 | 螺纹量规、直径检查、长度检查、直线度检查、目视检查 | 检验文件可以在订单确认前讨论。 |
材质及牌号说明
304不锈钢在公制紧固件采购中通常指定为A2不锈钢。它广泛用于室内和中等室外环境中的一般耐腐蚀、外观整洁、可靠的不锈钢紧固。它不能直接替代高强度合金钢，因此买家应确认耐腐蚀性或抗拉强度是否是主要设计要求。对于公制标准之间的尺寸比较， DIN和ISO紧固件标准指南 可以帮助买家检查常用参考，而最终尺寸应遵循图纸、标准和订单要求。
表面处理选择指南
普通和钝化
普通 304 不锈钢螺纹杆适用于许多通用不锈钢组件。可根据要求提供钝化，以提高螺纹加工或切削后的表面清洁度。如果棒要长期存放或在可见的不锈钢组件中使用，买方应指定钝化、清洁和包装保护。
抛光、打蜡或特殊表面
Polished or waxed surfaces may be selected where appearance, assembly smoothness, or handling protection is important. If the same order also includes carbon steel products, XZ Fastener can review related 涂层紧固件 和不锈钢棒一起形成综合采购清单。
制造和质量控制
Manufacturing control for 304 stainless steel threaded rods focuses on stainless raw material, thread rolling or threading method, thread form, straightness, cut length, chamfered ends, surface condition, and packing protection. Thread gauges, calipers, length checks, visual inspection, and order-based material review can be used according to buyer specification. For factory supply, clear size lists, accepted tolerances, and packing requirements help reduce confirmation time and support smoother receiving inspection.
应用领域
如何获得更快的报价
To receive a faster quotation, send the standard or drawing, diameter, thread pitch, total length, cut-length tolerance, material grade, surface requirement, quantity by size, end chamfer requirement, packing method, delivery expectation, and inspection requirements. If the rods are part of a larger installation package, you can 联系方式 XZ Fastener 并提供完整的物料清单以供审查。
常问问题
Can XZ Fastener manufacture 304 stainless steel threaded rods in bulk quantities?
Yes. Factory supply can be reviewed according to diameter, thread pitch, length, quantity, surface condition, packing method, inspection plan, and delivery schedule.
304不锈钢螺纹杆常用哪些标准？
常见参考包括DIN 976、DIN 975 样式描述、ASTM F593、公制螺纹要求、UNC/UNF螺纹要求或买方图纸。
304不锈钢和A2不锈钢一样吗？
在很多公制紧固件采购说明中，304不锈钢通常被称为A2不锈钢。买家应在生产前确认确切的材料和性能等级。
Can threaded rods be supplied cut to length?
Yes. Cut-to-length threaded rods can be reviewed according to length, tolerance, end chamfer, quantity, and packing requirement.
可以提供钝化或清洗吗？
可根据要求提供钝化、清洁、抛光、打蜡或其他表面处理。报价前应确认所需表面。
检验文件需要哪些信息？
买方应在订单确认前说明螺纹规格检查、长度公差、直径检查、材料确认、表面要求以及任何特定于项目的报告格式。
Send Your 304 Stainless Threaded Rod Inquiry
For a clear quotation, send your size list, finish, quantity, packaging, and inspection requirements. Include drawings, thread pitch, length tolerance, stainless grade, end chamfer needs, and receiving requirements when available, then use 请求报价 联系XZ Fastener团队进行工厂供应审核。
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文