DIN 933 黑色氧化六角螺栓供应商
XZ Fastener supplies DIN 933 black oxide hex bolts for buyers who need full-thread metric hex head bolts with a dark surface, controlled dimensions, and practical assembly performance. Black oxide is often selected for indoor machinery, fixtures, equipment frames, and oiled assemblies where low coating buildup and appearance are important. Sizes, strength grades, packaging, and inspection requirements can be reviewed according to order requirement. Buyers can also compare black oxide DIN 933 bolts with zinc plated DIN 933 bolts and hot dip galvanized DIN 933 bolts before confirming the finish.
快速规格
What Buyers Should Know Before Sourcing DIN 933 Black Oxide Hex Bolts
确认全螺纹及标准
DIN 933 full thread hex bolts are used when continuous thread engagement is required along the shank. If the project drawing allows DIN 933 or ISO 4017, confirm the standard, length under head, thread pitch, and grade before quotation. Buyers can review related DIN 931 and DIN 933 black oxide carbon steel hex head bolts for product reference.
Understand the black oxide finish
Black oxide is a thin conversion finish that gives a dark appearance and limited corrosion protection when used with oil. It is often chosen when the buyer wants a darker surface and less coating buildup than heavier corrosion-resistant finishes. For heavier outdoor protection, another coating may be more suitable.
Separate full thread from partial thread
DIN 933 bolts are fully threaded, while DIN 931 bolts are partially threaded. This matters for grip length, nut position, and thread engagement. If the purchase record is unclear, the DIN 933 与DIN 931 指南 can help confirm the correct description.
Match grade to assembly load
Grade 8.8 carbon steel hex bolts are commonly used for machinery and structural assemblies. Grade 10.9 may be requested for higher strength applications, but the nut grade, washer hardness, tightening method, and service conditions should also be reviewed before order confirmation.
常见采购说明
Procurement teams may describe the same or related items in different ways. Clear wording helps confirm material, grade, finish, inspection scope, and packaging requirements.
- DIN 933 black oxide hex bolts, full thread, metric coarse thread
- DIN 933 full thread hex bolts, black oxide and oiled finish
- Grade 8.8 carbon steel hex bolts, black oxide, DIN 933 / ISO 4017
- Metric hex head bolts, M6 to M36, full thread, carbon steel
- 机械和夹具装配用黑色氧化DIN 933 螺栓
- Zinc plated DIN 933 bolts for buyers comparing indoor corrosion protection
- Hot dip galvanized DIN 933 bolts for projects requiring heavier outdoor coating
For additional bolt, nut, washer, screw, and custom part sourcing, buyers can browse XZ Fastener’s 紧固件产品.
详细规格表
| 项目 | 典型供应信息 | 买家须知 |
|---|---|---|
| 产品展示 | DIN 933 黑色氧化六角螺栓 | Full-thread metric hex head bolts with dark finish and oil protection. |
| 标准型 | DIN 933、ISO 4017 等效讨论可用 | Confirm whether the drawing requires DIN, ISO, or buyer-specific reference. |
| 尺寸范围 | 常见公制尺寸如M6-M36，其他尺寸待审核 | Provide diameter, length under head, thread pitch, and quantity for each size. |
| 线程 | 通常要求全螺纹、公制粗螺纹 | Fine thread or special pitch should be clearly shown in the inquiry. |
| 强度等级 | 4.8, 8.8, 10.9 according to order requirement | Grade selection should match the assembly load and mating nut or washer requirement. |
| 材质 | 碳钢或合金钢取决于等级 | 较高等级通常需要受控热处理和机械检查。 |
| 完成 | Black oxide with oil, or other finishes upon request | State appearance, oil requirement, corrosion expectation, and packing protection. |
| 检查 | 尺寸、螺纹规格、硬度、表面、涂层、包装检查 | 机械报告或第三方检验可以在订购前讨论。 |
| 包装 | 散装纸箱、小箱、托盘或买家指定的包装 | Include carton weight limit, label format, barcode, and anti-rust packing requirement. |
材质及牌号说明
DIN 933 black oxide hex bolts are usually ordered in carbon steel or alloy steel according to the required property class. Grade 8.8 carbon steel hex bolts are common for machinery, brackets, and general steel assemblies. Higher grades such as 10.9 may be used where the design requires higher strength, but grade changes should be approved according to the project specification.
Buyers comparing mechanical classes can review XZ Fastener’s ISO 898-1 螺栓等级指南. Bolt grade, nut grade, washer hardness, tightening method, and finish should be considered together because each factor affects final assembly performance.
表面处理选择指南
黑色氧化
Black oxide DIN 933 bolts are suitable for dark appearance, low coating buildup, and controlled indoor assemblies. Oil protection is usually important because black oxide alone is not intended for heavy corrosion exposure.
镀锌
Zinc plated DIN 933 bolts are commonly selected for general indoor corrosion protection and bright or yellow appearance. Buyers comparing zinc plating with black oxide should consider appearance, corrosion expectation, and any high-strength process concerns.
热镀锌
Hot dip galvanized DIN 933 bolts may be considered for outdoor steelwork, but the coating is thicker and can affect thread fit. Buyers can compare coating options in the 表面光洁度对比图.
锌片及其他涂料
Zinc flake coatings may be discussed when corrosion resistance is needed without electroplating. Color, thickness, friction, and salt spray requirements should be confirmed. XZ Fastener’s 紧固件涂层指南 explains common coating choices for industrial fasteners.
制造和质量控制
Production typically includes material review, heading, thread rolling, heat treatment where required, black oxide finishing, oil application, sorting, and packing. Key dimensional checks include diameter, length under head, across flats, head height, thread pitch, full thread length, chamfer, and bearing surface. Surface checks may include appearance, oil coverage, and protection during packing.
Thread verification is important for metric hex head bolts because the coating and oil should not create assembly problems. Buyers can request thread gauge checks according to order requirement. The 通过/不通过螺纹量规测试指南 解释了螺栓、螺母和螺钉的实用检查方法。
应用领域
- Machinery manufacturing, fixture assembly, and equipment maintenance
- Indoor steel frames, brackets, supports, and machine guards
- Tooling, jigs, clamps, conveyors, and automation equipment
- Assemblies requiring a dark surface and low coating buildup
- General engineering use where black oxide with oil protection is acceptable
For outdoor or wet environments, buyers should compare black oxide with zinc plating, hot dip galvanizing, or zinc flake coatings before confirming the order. The 镀锌与热镀锌螺栓指南 can help when heavier corrosion protection is being considered.
如何获得更快的报价
Prepare a clear size list with diameter, length, pitch, grade, finish, quantity, packaging method, delivery destination, and inspection requirements. If the black oxide bolts must match a drawing, sample, or previous purchase record, attach those files with the inquiry. Buyers can 请求报价 for DIN 933 black oxide hex bolts and related fasteners.
常问问题
Are DIN 933 black oxide hex bolts fully threaded?
Yes. DIN 933 is a full-thread hex head bolt standard. If the assembly needs a partial thread, DIN 931 or another drawing-controlled standard should be checked.
Is black oxide suitable for outdoor bolts?
Black oxide is generally used for controlled indoor applications and usually needs oil protection. For outdoor or wet environments, zinc plating, hot dip galvanizing, or zinc flake coating may be more suitable.
Can Grade 8.8 carbon steel hex bolts be supplied with black oxide?
Grade 8.8 carbon steel hex bolts can be discussed with black oxide finish according to size, grade requirement, inspection scope, and order quantity.
What should be specified for black oxide DIN 933 bolts?
Buyers should specify size, length, thread pitch, grade, black oxide and oil requirement, quantity, packaging method, and required inspection documents.
黑色氧化可以改变螺纹配合吗？
Black oxide is a thin finish and usually has less buildup than heavier coatings, but thread fit should still be checked when the assembly has strict tolerance requirements.
XZ Fastener可以提供配套的螺母和垫圈吗？
配套螺母和垫圈可根据订单要求协商。提供螺栓等级、表面处理、标准参考和装配条件以进行兼容性审查。
Send Your DIN 933 Black Oxide Hex Bolt Inquiry
为了更快地得到答复，请发送您的尺寸表、表面处理、数量、包装方法和检验要求。 XZ Fastener可审查DIN 933全螺纹六角螺栓，8.8 级碳钢六角螺栓，公制六角头螺栓，镀锌DIN 933螺栓，黑色氧化DIN 933螺栓，热浸镀锌DIN 933根据订单要求提供螺栓和相关紧固件。
索取报价 与您的图纸、采购清单或项目规范。
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文