40Cr high tensile bolts exporter
XZ Fastener supplies 40Cr high tensile bolts for international buyers who need controlled alloy steel material, heat treatment, thread accuracy, surface finish, packing, and export documents. 40Cr is commonly used for stronger metric hex head bolts, studs, and special bolting parts in machinery, vehicle components, tooling, and steel structure assemblies. Products can be supplied according to DIN, ISO, GB, ANSI, or buyer drawings. Purchasing teams can review related منتجات السحابة before sending a size list for quotation.
المواصفات السريعة
What Buyers Should Know Before Sourcing 40Cr High Tensile Bolts
Export buyers should confirm more than size and quantity. 40Cr high tensile bolts require clear information about property class, heat treatment, thread tolerance, finish, packing, and inspection. These details affect production route, batch control, delivery time, and final assembly performance.
For non-standard head dimensions, shoulder sections, fine threads, extended lengths, drilled holes, or project-specific markings, XZ Fastener can review السحابات المخصصة according to drawings, samples, or clear technical descriptions.
أوصاف الشراء الشائعة
- 40Cr high tensile hex bolts, quenched and tempered, black oxide finish.
- 40Cr metric hex head bolts, Grade 10.9, partial thread, export pallet packing.
- DIN 933 full thread hex bolts in 40Cr alloy steel for machinery assembly.
- الصف 8.8 فولاذ كربوني مسامير سداسية for medium-strength applications and replacement stock.
- Zinc plated DIN 933 bolts and black oxide DIN 933 bolts for equipment and workshop inventory.
- Hot dip galvanized DIN 933 bolts for outdoor steel structures, with coating thickness and thread fit reviewed before production.
جدول المواصفات التفصيلية
| البند | الخيارات المتاحة | تصدير ملاحظات المشتري |
|---|---|---|
| نوع المنتج | Hex bolts, heavy hex bolts, flange bolts, studs, shoulder bolts, and special bolting parts | Send drawings for non-standard geometry, special head height, or controlled tolerance. |
| مادة | 40Cr alloy steel; alternative alloy steel grades available upon request | Equivalent grades should be confirmed by chemical composition and mechanical properties. |
| قياسي | DIN 931, DIN 933, ISO 4014, ISO 4017, GB, ANSI, ASTM, or buyer drawing | State the standard revision if the project specification controls it. |
| نطاق القطر | Metric and inch bolt sizes can be reviewed according to order quantity and tooling | Large diameters may require additional review for heat treatment depth and straightness. |
| الموضوع | متري خشن، متري ناعم، UNC، UNF، خيط كامل، قلاوظ جزئي | Include pitch, tolerance, and mating nut requirement in the size list. |
| المعالجة الحرارية | Quenching and tempering according to strength, hardness, or drawing requirement | Provide required property class, hardness range, tensile strength, or test method. |
| الانتهاء من السطح | Plain oil, black oxide, zinc plated, phosphate, Geomet, Dacromet, hot dip galvanized | Finish selection should match corrosion exposure, torque condition, and shipping route. |
| التفتيش | Dimensional check, thread gauge, hardness, tensile, proof load, coating thickness, visual inspection | Inspection reports or third-party checks should be confirmed before order placement. |
| التعبئة | Bulk cartons, small boxes, pallets, export labels, project labels, mixed-size packing | Provide carton weight limit, pallet rules, label format, and shipping mark if needed. |
شرح المواد والصف
40Cr is a chromium alloy steel commonly used for high tensile bolts after quenching and tempering. Compared with ordinary low carbon steel, 40Cr can offer improved hardenability and higher strength potential when heat treatment is properly controlled.
For international orders, 40Cr should not be treated as automatically interchangeable with another grade unless the drawing or buyer specification allows it. Buyers should confirm chemical composition, mechanical properties, hardness, tensile strength, proof load, and test method before production.
دليل اختيار تشطيب السطح
- Plain oil: suitable for indoor storage or parts that will be assembled soon after delivery.
- أكسيد أسود: common for machinery bolts where a dark appearance and light oil protection are acceptable.
- مطلي بالزنك: used for general corrosion protection and clean appearance in dry environments.
- Phosphate: selected for controlled friction, oil retention, or specific assembly requirements.
- Geomet or Dacromet: considered when improved corrosion resistance is needed for high tensile bolts.
- مجلفن بالغمس الساخن: used for outdoor steel structures, with coating thickness and thread fit reviewed in advance.
التصنيع ومراقبة الجودة
Production Review
Export production planning covers material confirmation, drawing review, heading or machining, thread rolling or cutting, heat treatment, surface finishing, inspection, batch separation, and packing. For 40Cr bolts, heat treatment control is a key step because it affects strength, hardness, and service performance.
For material traceability, buyers can discuss raw material inspection, batch control, and documentation before production starts.
نقاط التفتيش
Common checks include size measurement, thread gauge inspection, head dimension verification, hardness test, tensile or proof load test when required, coating thickness, surface appearance, marking, quantity, and packing label review.
For more detail on process checks, review XZ Fastener’s article about manufacturing quality control.
التطبيقات
الآلات الثقيلة
Used in frames, brackets, housings, lifting components, and equipment maintenance assemblies.
Automotive and Transport
Selected for mechanical assemblies where strength, thread engagement, and vibration resistance matter.
معدات التعدين
Applied in high-load fastening positions where impact and repeated maintenance cycles are considered.
Tooling Fixtures
Used in clamping systems, fixture plates, dies, molds, and workshop tooling assemblies.
الهياكل الفولاذية
Can be reviewed for structural bolting packages where grade, finish, and inspection are controlled.
الصيانة الصناعية
Supplied for replacement stock, repair kits, and multi-size maintenance fastener orders.
كيفية الحصول على عرض أسعار أسرع
A complete inquiry helps the export team check material, tooling, heat treatment, finish, inspection, packing, and shipping details without repeated clarification. For 40Cr high tensile bolts, strength class and heat treatment requirements should be listed clearly.
- Send size list with diameter, length, thread pitch, standard, and quantity.
- Confirm full thread or partial thread, property class, and material grade.
- Attach drawings for non-standard dimensions, special markings, holes, or controlled tolerances.
- State finish, packaging method, label format, carton weight, pallet requirement, and destination.
- List inspection requirements, reports, or third-party checking before quotation.
Export Packing and Documents
Export bolt orders may require item labels, pallet marks, carton weight control, moisture protection, and accurate document descriptions. Buyers can prepare invoice information, packing list details, shipping marks, and destination requirements in advance. XZ Fastener can discuss export shipping documents before shipment planning.
For project orders, separate each bolt size and finish by line item. If bolts will be assembled with nuts, washers, painted steel, or galvanized steel, mention the mating parts so thread fit and coating thickness can be reviewed.
الأسئلة الشائعة
Can XZ Fastener export 40Cr high tensile bolts according to DIN or ISO standards?
Yes. 40Cr high tensile bolts can be reviewed according to DIN, ISO, GB, ANSI, ASTM, or buyer drawings. Please provide the standard, size, thread pitch, grade, finish, quantity, and inspection requirement.
What strength class can 40Cr bolts be supplied in?
40Cr bolts can be heat treated for high tensile applications, with classes such as 8.8 or 10.9 reviewed according to size, standard, and order requirement. Buyers should state the required property class or mechanical values.
Which finish is commonly used for export 40Cr high tensile bolts?
Black oxide, zinc plating, phosphate, Geomet, Dacromet, and hot dip galvanizing can be discussed. The suitable finish depends on corrosion exposure, assembly torque, storage time, and appearance requirements.
Can 40Cr bolts be supplied with inspection reports?
Inspection reports for dimensions, hardness, tensile or proof load, coating thickness, and other agreed items can be discussed before order confirmation. Requirements should be stated in the inquiry.
Can XZ Fastener make non-standard 40Cr bolts from drawings?
Drawing-based bolts can be reviewed according to order requirement. Please provide dimensions, tolerances, material grade, heat treatment, finish, inspection requirements, and quantity.
ما هي المعلومات المطلوبة لعرض أسعار التصدير؟
Please send product standard or drawing, size list, thread pitch, material, strength class, finish, quantity, packaging, inspection requirements, delivery destination, and required shipping documents.
Send Your 40Cr High Tensile Bolt Export Inquiry
For a faster quotation, send your size list, finish, quantity, packaging, and inspection requirements. Drawings, samples, mating nut details, destination, and document needs help XZ Fastener confirm production and export supply arrangements more accurately.
English 
Español 
Tiếng Việt 
Русский 
العربية