العربية 
English 
Español 
Tiếng Việt 
Русский A fastener RFQ looks simple only when the part is simple. In real purchasing work, many quotation problems start with missing details: size without grade, material without coating, or a drawing without thread tolerance.
After years of reviewing bolt, nut, washer, screw, anchor, and stud inquiries, one rule is clear: the more complete the RFQ, the more reliable the quotation.
A clear RFQ helps the supplier quote the right item, choose the right production route, and avoid wrong-spec delivery.
Why Fastener RFQs Go Wrong
Most fastener selection mistakes are not caused by bad intention. They happen because buyers assume the supplier already knows the application.
That is risky.
| Missing RFQ Detail | Possible Result |
|---|---|
| Strength grade | Wrong mechanical performance |
| Thread pitch | Nut mismatch or assembly failure |
| Surface finish | Poor corrosion resistance or thread fit issue |
| Application environment | Wrong material or coating selection |
| Matching parts | Bolt, nut, and washer may not work together |
| Standard or drawing | Dimensions may not match project needs |
For regular items, buyers can compare available standard fasteners before preparing the inquiry.
Core Information Every RFQ Should Include
Product and Dimensional Data
The RFQ should clearly identify the fastener type and size. Avoid short descriptions such as “M12 bolt” or “stainless screw.”
Provide:
- Product type: bolt, nut, washer, screw, anchor, stud, or threaded rod
- Standard: DIN, ISO, ASTM, ASME, ANSI, EN, or drawing
- Diameter, length, thread pitch, and thread length
- Head type, drive type, or special shape
- Full thread, partial thread, or custom thread length
- Quantity and unit: pieces, sets, kilograms, or cartons
For complete sourcing, buyers may review the full fastener products range.
Material, Grade, and Finish
Fastener selection depends on load, corrosion exposure, installation method, and service life.
| RFQ Item | What to Specify |
|---|---|
| مادة | Carbon steel, alloy steel, stainless steel, brass, etc. |
| درجة | 4.8, 8.8, 10.9, 12.9, A2-70, A4-80, B7, etc. |
| Finish | Zinc plated, HDG, black oxide, zinc flake, PTFE, plain |
| Matching parts | Nut grade, washer hardness, coating compatibility |
| Documents | MTC, inspection report, coating report, certificate |
For load-bearing projects, include requirements for high-strength fasteners. For corrosive environments, compare coated fasteners or stainless steel fasteners.
Application Details Matter
Working Conditions
A supplier cannot select the right fastener without knowing where it will be used.
State whether the fastener is used in:
- Indoor machinery
- Outdoor structures
- Marine or coastal areas
- Chemical plants
- Automotive assemblies
- Wind power equipment
- Concrete anchoring
- High-vibration joints
For drawing-based or unusual parts, use custom non-standard fasteners and provide drawings, samples, or marked photos.
Final RFQ Checklist
Before sending an inquiry, confirm:
- Product name and standard
- Size, pitch, length, and thread length
- Material and strength grade
- Surface finish and corrosion requirement
- Matching nuts, washers, or assembled parts
- Working environment and load condition
- Quantity, packaging, and delivery requirement
- Required inspection reports or certificates
A good RFQ does not need to be complicated. It needs to be complete. Clear information at the start prevents wrong pricing, wrong production, and field installation problems later.