Stainless Steel Carriage Bolts Wholesale Supplier
XZ Fastener supplies stainless steel carriage bolts for distributors, OEM buyers, construction hardware suppliers, machinery builders, and project procurement teams that need reliable round head square neck bolts in bulk. These bolts are commonly ordered to DIN 603 or drawing-based requirements, with A2/304 and A4/316 stainless steel options for indoor, outdoor, marine-adjacent, and corrosion-sensitive assemblies. The square neck helps prevent rotation during tightening, while the smooth mushroom head gives a finished appearance and reduces snag points. Standard sizes, mixed cartons, private labeling, and inspection documents can be arranged according to order requirement.
For a directly related item page, review XZ Fastener’s DIN 603 stainless steel carriage bolts.
المواصفات السريعة
What Buyers Should Know Before Sourcing Stainless Steel Carriage Bolts
Head and Neck Fit
Carriage bolts rely on the square neck under the mushroom head to resist rotation. Before purchasing, confirm the square hole or receiving material thickness, because a neck that is too shallow may slip and a neck that is too large may damage the assembly.
Material and Environment
A2/304 is widely used for general corrosion resistance. A4/316 is normally chosen for more demanding outdoor, coastal, chemical, or washdown environments. For multiple bolt styles in one order, compare sizes and finishes against XZ Fastener’s carriage bolt product options.
Stainless steel carriage bolts are commonly selected for corrosion resistance and clean appearance. They are not always interchangeable with high-strength carbon steel bolts in structural load applications; project engineers should confirm load, safety factor, and installation conditions.
أوصاف الشراء الشائعة
International buyers may describe the same product in several ways. Clear descriptions reduce back-and-forth during quotation and sampling.
For general comparison between head styles, see this bolt type guide covering hex bolts, flange bolts, carriage bolts, and related fasteners.
جدول المواصفات التفصيلية
| البند المواصفات | الخيارات المشتركة | ملاحظات الشراء |
|---|---|---|
| نوع المنتج | Carriage bolt, coach bolt, round head square neck bolt | Confirm whether the order follows DIN 603, inch standard, or buyer drawing. |
| نطاق القطر | M5, M6, M8, M10, M12, M16, M20 and selected inch sizes | Non-standard diameters can be reviewed with drawing and annual demand. |
| نطاق الطول | Short, medium, and long lengths according to standard or drawing | Length is normally measured from under the head to the bolt end. |
| الموضوع | Metric coarse, metric fine, UNC, UNF, full or partial thread | Specify thread pitch clearly, especially for replacement parts and export orders. |
| مادة | 304/A2, 316/A4 stainless steel; other stainless grades upon request | 316/A4 is often selected when chloride exposure is a concern. |
| فئة القوة | A2-70, A4-70, A4-80 where applicable | Mechanical properties should match the application and mating nut grade. |
| السطح | Plain, passivated, polished, coated, waxed | Passivation and polishing can improve appearance and surface cleanliness. |
| أجزاء متطابقة | Hex nuts, lock nuts, flat washers, spring washers | Complete sets can be packed together when assembly teams need ready-to-use kits. |
| التعبئة | Bulk carton, small box, poly bag, carton on pallet, buyer label | Carton weight, moisture protection, and label format should be confirmed before production. |
| التفتيش | Dimensional report, visual check, thread gauge check, material document upon request | Define inspection level before order confirmation to avoid missing project documentation. |
شرح المواد والصف
304/A2 stainless steel is a practical choice for general industrial hardware, furniture, machinery covers, and many outdoor applications. It offers good corrosion resistance and stable appearance when the installation environment is not highly aggressive. 316/A4 stainless steel contains molybdenum and is commonly selected for coastal, marine-adjacent, chemical, food equipment, and washdown environments where additional corrosion resistance is required.
A2-70 and A4-70 indicate stainless steel fastener property classes, not carbon steel grades. Buyers replacing Grade 8.8 or Grade 10.9 carbon steel bolts should confirm the required tensile strength before switching to stainless. For a deeper purchasing reference, review XZ Fastener’s guide to درجات الترباس فولاذ مقاوم للصدأ.
دليل اختيار تشطيب السطح
| إنهاء | الاستخدام النموذجي | النظر في المشتري |
|---|---|---|
| عادي غير القابل للصدأ | General assembly where natural stainless appearance is acceptable | Cost-effective for many standard bulk orders. |
| تخميلها | Outdoor hardware, clean equipment, corrosion-sensitive assemblies | Helps remove free iron contamination from the surface. |
| مصقول | Visible furniture, railings, decorative hardware | Improves appearance but should be specified with clear surface expectations. |
| Black Coated | Dark hardware, machinery covers, visible assemblies | Coating type, adhesion, and corrosion requirement should be confirmed. |
| مشمع أو مشحم | Assembly work where installation consistency is important | Confirm compatibility with mating nuts and working environment. |
When the project includes carbon steel hex bolts as well as stainless carriage bolts, finish selection may differ by part. XZ Fastener’s finish selection guide explains how service life, environment, and assembly conditions affect the choice.
التصنيع ومراقبة الجودة
Stainless steel carriage bolts are typically made through wire preparation, cold heading, square neck forming, thread rolling, cleaning, surface treatment, inspection, and packing. For custom parts, drawing review should confirm head diameter, head height, neck width, neck depth, shank length, thread length, tolerance, and any special marking requirement before production.
Quality control can include raw material verification, first-piece inspection, in-process dimensional checks, GO/NO-GO thread gauges, head and neck measurements, visual surface sorting, packing confirmation, and final sampling according to order requirement. More detail is available in XZ Fastener’s article on manufacturing and quality control.
التطبيقات
- Wood-to-metal fastening for frames, brackets, and support structures.
- Outdoor furniture, benches, playground hardware, and public facility components.
- Machinery guards, equipment covers, and panels where a smooth head is preferred.
- Railings, fencing, gate hardware, and general construction hardware.
- Marine-adjacent and washdown assemblies when A4/316 stainless is specified.
- Agricultural equipment, trailers, and utility hardware with exposed fasteners.
- OEM kits requiring paired bolts, nuts, washers, and labeled small packs.
- Replacement parts where anti-rotation installation is required from one side.
كيفية الحصول على عرض أسعار أسرع
To shorten quotation time, send a clear size list and application notes. A complete request helps confirm material, production method, packing, inspection scope, and delivery schedule without repeated clarification.
- Standard or drawing: DIN 603, ANSI/ASME B18.5, sample photo, or technical drawing.
- Size list: diameter, length, thread pitch, full or partial thread, and quantity per size.
- Material and grade: 304/A2, 316/A4, A2-70, A4-70, or other requested grade.
- Finish: plain, passivated, polished, black coated, waxed, or project-specific surface treatment.
- Accessories: nuts, flat washers, spring washers, lock nuts, or packed sets.
- Packing: bulk carton, small box, bagged kits, pallet requirement, label, barcode, or private brand packing.
- Inspection: dimensional report, material document, sample approval, photo report, or third-party inspection requirement.
When the list is ready, طلب عرض أسعار from XZ Fastener with your target delivery schedule and destination market.
الأسئلة الشائعة
Are carriage bolts and coach bolts the same product?
In many purchasing documents, carriage bolts and coach bolts refer to the same round head square neck bolt. The exact standard, dimensions, and thread type should still be confirmed before ordering.
Can XZ Fastener supply both 304 and 316 stainless steel carriage bolts?
Yes. A2/304 and A4/316 stainless steel carriage bolts can be supplied according to order requirement. 316/A4 is normally chosen when stronger corrosion resistance is needed.
Can I order mixed sizes in one shipment?
Mixed sizes can usually be arranged. Buyers should provide quantity per size, packing preference, carton weight limits, and whether each size needs separate labels or barcode information.
Which finish is recommended for stainless steel carriage bolts?
Plain stainless is common for standard use. Passivation is often requested for cleaner surface condition, while polishing or coating may be selected for visible hardware or specific appearance requirements.
Can stainless carriage bolts be supplied with nuts and washers?
Yes. Matching stainless steel nuts and washers can be supplied as separate bulk items or packed together as sets. Confirm the nut standard, washer type, and packing method during quotation.
ما هي وثائق التفتيش التي يمكن طلبها؟
Common documents include dimensional inspection reports, thread gauge inspection records, packing photos, and material documents when traceability is arranged before production. Third-party inspection can be discussed if required by the project.
Send Your Stainless Steel Carriage Bolt RFQ
For a faster and more accurate quotation, send your size list, finish, quantity, packaging method, and inspection requirements. If you have drawings, samples, photos, or a current supplier specification, include them with the request so XZ Fastener can review the correct head, square neck, thread, material, and packing details.
- Size list: diameter, length, thread pitch, and quantity.
- Finish: plain, passivated, polished, coated, or custom requirement.
- Packaging: bulk carton, small box, poly bag, pallet, label, or kit packing.
- Inspection: dimensional report, material document, sample approval, or third-party inspection.
English 
Español 
Tiếng Việt 
Русский 
العربية