Fabricant d'écrous hexagonaux DIN 934
XZ Fastener supplies DIN 934 hex nuts for machinery assembly, steel structures, construction hardware, equipment maintenance, threaded rods, and bolt-nut-washer sets. DIN 934 is a common metric hex nut standard used with metric hex head bolts, studs, threaded rods, and anchors. Carbon steel, stainless steel, and alloy steel options can be supplied according to strength, corrosion exposure, and assembly requirements. Buyers can specify thread size, grade, material, surface finish, quantity, packaging method, matched bolts or washers, and inspection documents before production.
Spécifications rapides
Ce que les acheteurs doivent savoir avant de se procurer des écrous hexagonaux DIN 934
DIN 934 hex nuts look simple, but purchasing errors often happen when thread size, nut grade, bolt grade, coating thickness, and packaging labels are not clearly defined. A DIN 934 nut should be selected together with the mating bolt, threaded rod, washer, tightening method, and service environment. For example, Grade 8.8 carbon steel hex bolts usually need compatible nut grades rather than a random low-strength nut.
Thread Compatibility
DIN 934 nuts are normally supplied with metric coarse thread, while fine pitch can be reviewed by order. Buyers should confirm thread pitch when ordering replacement nuts, threaded rod nuts, or mixed bolt-nut sets.
Matched Assembly
When DIN 934 nuts are used with DIN 933 full thread hex bolts or DIN 931 partial thread bolts, nut grade and washer selection should match the working load. This guide de correspondance des boulons, écrous et rondelles can help buyers prepare a more complete purchase list.
Pour une référence produit proche, voir XZ Fastener’s DIN 934 écrous hexagonaux métriques page with carbon steel and stainless steel options for machinery and industrial fastening.
Descriptions d'achat courantes
DIN 934 hex nuts may be described differently by importers, distributors, project buyers, and maintenance teams. A practical purchasing description should include the standard, thread size, material, grade, finish, and packing requirement.
- DIN 934 hex nuts, M12, Class 8, zinc plated carbon steel
- DIN 934 metric hex nuts, M16, black oxide finish, for machinery assembly
- Carbon steel DIN 934 nuts with Grade 8.8 carbon steel hex bolts and flat washers
- Écrous DIN 934 galvanisés à chaud assortis aux boulons DIN 933 galvanisés à chaud
- Stainless steel DIN 934 hex nuts, A2 or A4, plain finish
- DIN 934 nuts packed in small boxes with pallet labels for distributor stock
For buyers building complete fastening kits, XZ Fastener can also review related produits de fixation, including washers, threaded rods, anchors, DIN 931 bolts, and DIN 933 full thread hex bolts.
Tableau des spécifications détaillées
| Article | Exigence typique | Notes de l'acheteur |
|---|---|---|
| Norme | DIN 934 écrous hexagonaux métriques | Confirm if the project requires DIN, ISO, ASTM, or another nut standard. |
| Taille du fil | M2 to M64 common supply range; larger sizes reviewed by inquiry | Provide exact thread size and pitch for fine-thread or special-thread nuts. |
| Type de filetage | Filetage métrique grossier en fourniture courante ; emplacement fin disponible sur demande | Thread gauge inspection can be arranged according to order requirement. |
| Matériel | Carbon steel, alloy steel, stainless steel 304 / 316, brass | Material should match strength, corrosion exposure, and mating bolt material. |
| Catégorie de noix | Class 4, 5, 6, 8, 10, 12 or buyer-specified grade | Nut grade should be checked with the bolt grade and tightening method. |
| Terminer | Plaine, zingué, zinc jaune, oxyde noir, galvanisé à chaud, Dacromet, Geomet | Coating thickness affects thread fit, corrosion protection, and appearance. |
| Pièces assorties | DIN 931 bolts, DIN 933 bolts, threaded rods, flat washers, spring washers | Matched sets reduce assembly mismatch and warehouse picking errors. |
| Contrôle | Thread gauge, dimensions, hardness, proof load, coating thickness, visual checks | Inspection documents should be confirmed before production. |
| Emballage | Carton en vrac, petite boîte, sac, palette, marque privée, étiquette code-barres | Distributor packing and project labels can be prepared according to order requirement. |
For nut-grade and bolt-grade matching, buyers can review this guide on correspondance de la qualité des écrous et du couple des boulons avant de valider les assemblages à haute résistance.
Explication du matériau et de la qualité
Carbon steel DIN 934 hex nuts are common for machinery, construction, and distributor stock because they provide practical strength and cost control. Class 8 nuts are often paired with Grade 8.8 carbon steel hex bolts. For higher bolt grades, stronger nut classes may be required. Stainless steel DIN 934 nuts are selected when corrosion resistance is more important than high carbon-steel strength.
Nut selection should not be based only on thread size. Buyers should confirm nut grade, bolt grade, washer hardness, coating, and installation method. A nut that is too weak for the bolt can strip or fail before the joint reaches the intended clamp load. For threaded rods, studs, and structural bolt sets, proof load and hardness requirements may also need to be specified.
Guide de sélection de finition de surface
Surface finish should be selected according to corrosion exposure, appearance requirement, thread fit, storage time, and matching bolt finish. DIN 934 nuts can be supplied with the same or compatible finish as the bolts and washers in the assembly.
| Terminer | Utilisation appropriée | Considération d'achat |
|---|---|---|
| Nu ou huilé | Temporary assembly, controlled indoor storage, later coating | Nécessite une prévention contre la rouille pendant le stockage et le transport. |
| Zingué | Indoor equipment, warehouse stock, general fastening | Clean appearance and common availability; often matched with zinc plated DIN 933 bolts. |
| Zinc jaune | Distributor stock, general machinery, color-coded assemblies | Confirmer la tolérance d'apparence et les exigences environnementales locales. |
| Oxyde noir | Intérieurs de machines, assemblages huilés, exigences en matière de surface noire | Limited corrosion protection unless oil or other protection is applied; can be matched with black oxide DIN 933 bolts. |
| Galvanisé à chaud | Outdoor steelwork, guardrails, brackets, construction hardware | Thicker coating improves corrosion allowance, but internal thread fit must be controlled. Often matched with hot dip galvanized DIN 933 bolts. |
| Dacromet ou Géomet | Équipements extérieurs et ensembles sensibles à la corrosion | Utile lorsque les performances contre la corrosion et l’accumulation contrôlée du revêtement sont toutes deux importantes. |
For broader finish comparison, see XZ Fastener’s guide de revêtement des fixations before finalizing zinc plated, black oxide, hot dip galvanized, or zinc flake requirements.
Fabrication et contrôle qualité
DIN 934 hex nuts are normally produced through wire or bar preparation, cold forming or hot forging depending on size, tapping, heat treatment when required, surface finishing, inspection, and packing. Internal thread quality is critical because the nut must assemble smoothly with metric hex head bolts, threaded rods, and studs.
- Contrôles de la largeur des surplats, de la hauteur de l'écrou, du chanfrein et de la profondeur du filetage
- Go/no-go thread gauge inspection for metric thread compatibility
- Hardness or proof load testing when required by grade or project specification
- Examen de la couverture du revêtement, de la couleur, de l'épaisseur et de l'accumulation de filetage interne
- Séparation des tailles, poids des cartons, marquage des palettes et contrôles d'identification des lots
For purchase-order details specific to nuts, XZ Fastener also provides a practical guide to Exigences de la demande de prix pour les noix, including thread, grade, standard, coating, and packing information.
Applications
Machines et équipements
DIN 934 hex nuts are used with bolts and threaded rods in machinery frames, industrial skids, conveyors, agricultural equipment, and general equipment maintenance.
Construction and Steelwork
Carbon steel and hot dip galvanized DIN 934 nuts can be supplied for brackets, steel structures, guardrails, and exposed construction hardware when compatible bolts and washers are specified.
Assemblages de tiges filetées et de goujons
DIN 934 nuts are commonly used with threaded rods, double-end studs, anchor systems, and adjustable assemblies where thread fit and grade consistency are important.
Programmes de stocks de distributeurs
Importers and wholesalers can request mixed sizes, box labels, barcode labels, pallet marks, and matched bolt-nut-washer sets according to warehouse and customer needs.
Comment obtenir un devis plus rapide
Une enquête complète permet à XZ Fastener de vérifier plus efficacement les matériaux, l'outillage, la qualité, la finition, l'emballage et les délais de livraison. Si les écrous doivent être associés à des boulons, incluez la norme et la qualité du boulon dans la même demande.
- Norme : DIN 934 ou référence du dessin de l'acheteur
- Liste des tailles : taille et pas de filetage, tels que M8, M12, M16 x 1.5.
- Nut grade: Class 4, 5, 6, 8, 10, 12, or project-specified grade
- Matériau : acier au carbone, acier allié, acier inoxydable 304 / 316 ou autre exigence
- Finition : ordinaire, zingué, zinc jaune, oxyde noir, galvanisé à chaud, Dacromet, Geomet ou autre revêtement
- Quantité : quantité par taille et demande répétée attendue si disponible
- Emballage : carton en vrac, petite boîte, sac, palette, marque privée, code-barres ou marque de projet
- Exigences d'inspection : rapport dimensionnel, calibre de filetage, dureté, charge d'épreuve, épaisseur du revêtement, brouillard salin ou inspection par un tiers
Envoyez vos coordonnées via le demander un devis page ou contacter XZ Fastener for review of DIN 934 hex nuts and matched fastener assemblies.
FAQ
Qu'est-ce qu'un écrou hexagonal DIN 934 ?
DIN 934 is a metric hex nut standard used with metric bolts, threaded rods, studs, and anchors. It defines common hex nut dimensions such as across-flats width and nut height.
Can DIN 934 nuts be matched with Grade 8.8 bolts?
Yes. Class 8 DIN 934 nuts are commonly matched with Grade 8.8 carbon steel hex bolts. The final selection should consider bolt grade, washer type, tightening method, and project requirements.
What materials are available for DIN 934 hex nuts?
Common materials include carbon steel, alloy steel, stainless steel 304, stainless steel 316, and brass. Material selection depends on strength, corrosion exposure, and mating bolt material.
Which finishes can be supplied for DIN 934 nuts?
Common finishes include plain, zinc plated, yellow zinc, black oxide, hot dip galvanized, Dacromet, and Geomet. The correct finish depends on corrosion exposure, appearance requirement, and thread-fit needs.
XZ Fastener peut-il fournir des écrous DIN 934 avec boulons et rondelles ?
Yes. DIN 934 nuts can be supplied with DIN 931 bolts, DIN 933 full thread hex bolts, flat washers, spring washers, hardened washers, and assembled bolt-nut-washer sets according to order requirement.
Que dois-je fournir pour un devis précis ?
Veuillez fournir la liste des tailles, le pas de filetage, la qualité, le matériau, la finition, la quantité, la méthode d'emballage, les exigences d'inspection et toute exigence relative aux boulons ou aux rondelles correspondants.
Envoyez votre demande sur l'écrou hexagonal DIN 934
For a faster response, send your size list, finish, quantity, packaging method, and inspection requirements. XZ Fastener can review DIN 934 hex nuts, matched washers, threaded rods, DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts, metric hex head bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, and hot dip galvanized DIN 933 bolts according to your purchasing plan.
Demander un devis
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文