APERÇUS XZ

Connaissances en matière de fixation industrielle · Tendances de l'industrie · Informations techniques

Individual Fastener Serial Numbers: Build the Inspection Register

Facebook
X
LinkedIn
Reddit
WhatsApp
Courriel

Table of Contents

Batch traceability tells a buyer which manufacturing lot supplied a fastener. An individual serial number answers a different question: which particular piece was inspected, shipped or assigned to an equipment position? Decide whether the project needs that extra level of identification before adding serial marking to an RFQ.

Define what the serial number must accomplish

Write the use case first. The buyer may need to connect a particular part to an individual dimensional examination, a fitted assembly, a maintenance record or an installation location. Those purposes require different information and should not be reduced to a request for “full traceability.”

Keep the original manufacturing lot and material identity in the record. A serial number is an additional identifier, not a substitute for grade markings, manufacturer identification or other required product information.

Approve the marking before it is applied

Have the responsible technical authority approve the location, method, format and any restrictions on the part. The supplier should not choose a marking position solely because it is convenient to reach. Where permanent marking is unsuitable, agree an alternative identification method and its limitations with the purchaser.

State which party controls the numbering sequence. If several suppliers work on one project, define how duplicate numbers are prevented and whether the identifier must include a project or item prefix. Approve a layout before marking the production batch.

Build a piece-to-record register

  • Purchase order, item number, drawing and revision.
  • Unique piece identifier and manufacturing lot reference.
  • Material report reference and the supplied material condition.
  • Individual examination results, where such examinations are specified.
  • Sampled test reports, clearly identified as representing a lot rather than each piece.
  • Packing unit, shipment and any approved equipment-position reference.

Do not attach the same result to every serial number in a way that suggests every piece was tested when the report actually represents a sample. Make the relationship explicit so receiving personnel can distinguish individual measurements from lot-level evidence.

Control replacements and rejected pieces

Agree how unused numbers, damaged marks and rejected pieces will be recorded. If a replacement is supplied, its register entry should identify the replacement relationship without creating two active pieces with the same identity.

For split shipments, issue a register extract that matches the pieces in that consignment. Keep a controlled master record so later shipments do not reuse a number already dispatched. If the purchaser assigns final installation positions after receipt, distinguish that update from the supplier’s original manufacturing record.

Put the requirement into the quotation

Send XZ Fastener the identification purpose, quantity, drawing restrictions and required register format. Ask for a feasibility review of the marking and inspection scope before assuming that every available product can receive the same marking method. Material inspection reports, dimensional reports and batch traceability can be included in the document review; specify the issuing parties and scope for any EN 10204 3.1/3.2 or third-party requirement.

Utilisez le documented RFQ form. Keep the serial register alongside the project order control records et receiving checklist.

Rechercher des articles
Abonnez-vous aux actualités techniques

Connaissances en matière de fixation industrielle · Tendances de l'industrie · Informations techniques

Contactez rapidement un expert métier

XZ Ingénieur commercial

Bulk fastener quotations · MOQ 1,000 pieces

Tell us your fastener requirements. Our sales team will prepare your quotation.

Lead time: 3 days. Custom packaging available. Shipping time and order details are confirmed in your quotation.

Optional: attach drawings, photos or a specification list. Accepted: PDF, JPG, PNG, Word, Excel, XML and TXT.

Merci de votre visite !

Veuillez partager votre demande à sales@xzfastener.com