DIN 931 Grade 8.8 produsen baut hex
XZ Fastener supplies DIN 931 Grade 8.8 hex bolts for machinery frames, steel structures, equipment bases, bridge components, guardrail systems, and industrial maintenance programs. DIN 931 is a metric partial thread hex head bolt standard, commonly referenced with ISO 4014, and Grade 8.8 is selected where higher tensile strength is required than general low-carbon fasteners. Buyers can specify diameter, length, thread pitch, finish, matching nuts and washers, packing format, and inspection documents according to project or distributor requirements.
Spesifikasi Singkat
What Buyers Should Know Before Sourcing DIN 931 Grade 8.8 Hex Bolts
DIN 931 Grade 8.8 hex bolts are partial-thread bolts. They are often chosen when the unthreaded shank must pass through the shear plane or when the assembly requires a stronger bearing area than a fully threaded bolt can provide. Before confirming an order, buyers should check grip length, thread length, nut engagement, washer selection, finish thickness, and the working load condition.
Partial Thread Matters
The unthreaded shank helps reduce thread contact inside the clamped hole and can improve alignment in structural or mechanical assemblies. For mixed assemblies, compare DIN 931 with DIN 933 versus DIN 931 sebelum mengubah spesifikasi.
Grade 8.8 Needs Controlled Processing
Grade 8.8 carbon steel hex bolts are normally heat treated to meet mechanical properties. Buyers should confirm whether hardness, tensile testing, material certificates, coating thickness, or third-party inspection will be required before production.
Untuk referensi produk terdekat, lihat XZ Fastener’s DIN 931 ISO 4014 baut kepala hex page with partial thread, Grade 8.8, zinc, black oxide, and HDG options.
Deskripsi Pembelian Umum
Importers, project buyers, and maintenance teams may describe the same DIN 931 Grade 8.8 hex bolts in different ways. A clear purchasing description should include the standard, size, strength class, finish, and whether matched nuts and washers are required.
- DIN 931 Grade 8.8 hex bolts, M16 x 80, zinc plated, partial thread
- DIN 931 / ISO 4014 metric hex head bolts, Grade 8.8 carbon steel, black oxide finish
- Baut hex baja karbon Grade 8.8 dengan mur DIN 934 dan ring datar
- DIN 931 partial thread hex head bolts for machinery base assembly
- Hot dip galvanized DIN 931 Grade 8.8 bolts for outdoor steel structure use
For buyers also purchasing DIN 933 full thread hex bolts, XZ Fastener can help align partial thread DIN 931 sizes with fully threaded items in the same stock program.
Tabel Spesifikasi Detail
| Barang | Persyaratan Khas | Catatan Pembeli |
|---|---|---|
| Standar | DIN 931, commonly referenced with ISO 4014 | Confirm project drawings if strict standard interchangeability is required. |
| Tipe Baut | Baut kepala hex dengan ulir parsial | Do not substitute DIN 933 full thread hex bolts unless the assembly design allows it. |
| Kelas Kekuatan | Grade 8.8 / property class 8.8 | Mechanical properties should follow the applicable standard and inspection requirement. |
| Bahan | Carbon steel or alloy steel suitable for Grade 8.8 heat treatment | Material certificate and heat number traceability can be supplied according to order requirement. |
| Kisaran Diameter | Ukuran metrik umum seperti M6 hingga M36; ukuran lain ditinjau melalui penyelidikan | MOQ may vary by diameter, length, material, and finish. |
| Rentang Panjang | Standard DIN 931 lengths and project-specific size lists | Thread length should be checked against grip thickness and nut engagement. |
| Benang | Benang metrik kasar sebagai pasokan umum; nada halus tersedia berdasarkan permintaan | State pitch clearly for non-standard or fine-thread metric hex head bolts. |
| Selesai | Plain, zinc plated, black oxide, hot dip galvanized, zinc flake, or other coating | Coating thickness affects thread fit, appearance, corrosion resistance, and cost. |
| Matched Components | DIN 934 nuts, flat washers, spring washers, or hardened washers | Matched bolt-nut-washer sets reduce receiving and assembly mismatch. |
| Inspeksi | Dimensions, thread gauge, hardness, tensile test, coating checks, packing checks | Define the inspection scope before production to avoid shipment delays. |
Penjelasan Materi dan Kelas
Grade 8.8 indicates a high-strength metric bolt property class commonly used for steel structures, machinery, brackets, and heavy equipment assemblies. In practical purchasing, Grade 8.8 carbon steel hex bolts should be evaluated by mechanical properties, heat treatment consistency, thread quality, surface finish, and nut compatibility.
The grade is not only a marking on the bolt head. Buyers should confirm the standard, material route, hardness range, tensile requirement, and whether documentation is needed for project records. For a deeper grade comparison, XZ Fastener provides a practical guide on Sifat mekanik baut 8.8, 10.9, dan 12.9.
Panduan Pemilihan Permukaan Akhir
Surface finish should be selected according to installation environment, expected storage time, appearance requirement, and assembly method. DIN 931 Grade 8.8 hex bolts can be supplied with several finishes, but each option has different corrosion performance and thread-fit considerations.
| Selesai | Penggunaan yang Cocok | Pertimbangan Pembelian |
|---|---|---|
| Berlapis seng | Indoor equipment, warehouse stock, general machinery, light corrosion conditions | Good appearance and common availability; for related fully threaded parts, see baut DIN 933 berlapis seng. |
| Oksida hitam | Interior mesin, rakitan yang diminyaki, persyaratan tampilan hitam | Limited corrosion protection unless oil or extra protection is applied; baut oksida hitam DIN 933 may be purchased together for mixed thread-length programs. |
| Galvanis celup panas | Outdoor steelwork, guardrail systems, solar brackets, exposed assemblies | Thicker zinc layer improves corrosion allowance, but thread fit and nut matching should be confirmed. Buyers may also compare hot dip galvanized DIN 933 bolts for full-thread needs. |
| Dacromet or zinc flake | Outdoor or equipment applications requiring higher corrosion performance and controlled coating build-up | Cost, color, friction behavior, and salt spray requirement should be stated in the RFQ. |
Untuk pilihan lapisan yang lebih luas, tinjau XZ Fastener’s panduan lapisan pengikat before finalizing the finish requirement.
Manufaktur dan Kontrol Kualitas
DIN 931 Grade 8.8 hex bolts usually involve wire preparation, heading or forging depending on size, shank and thread forming, heat treatment, surface finishing, inspection, and packing. Quality control should focus on the dimensions that affect fit and the mechanical properties that affect service performance.
- Across-flats width, head height, shank diameter, total length, and thread length checks
- Thread gauge inspection for correct pitch and fit with matched nuts
- Hardness and tensile testing when required by project or buyer specification
- Coating appearance, coverage, thickness, and thread build-up review
- Size separation, carton weight, pallet marking, and batch identification checks
For mixed stock requirements involving both partial-thread and full-thread bolts, XZ Fastener can review Baut segi enam DIN 931 dan DIN 933 Grade 8.8 in the same inquiry.
Aplikasi
Steel Structures and Frames
DIN 931 Grade 8.8 bolts are used in steel frames, support brackets, guardrails, and fabricated structures where a partial-thread shank is preferred through the grip area.
Mesin dan Peralatan
Metric hex head bolts in Grade 8.8 are common in machinery bases, conveyors, agricultural equipment, industrial skids, and maintenance replacement lists.
Konstruksi dan Infrastruktur
With suitable finish selection, DIN 931 bolts can be supplied for outdoor construction hardware, support plates, steel brackets, and project fastener kits.
Program Stok Distributor
Importers and wholesalers can request mixed sizes, matched nuts and washers, carton labels, pallet marks, and repeat stock lists according to local demand.
Cara Mendapatkan Penawaran Lebih Cepat
A complete RFQ helps XZ Fastener check production route, surface finish, packing cost, and delivery schedule quickly. If drawings or project standards are available, attach them with the size list.
- Standar: DIN 931, ISO 4014, atau referensi gambar pembeli
- Size list: diameter x length, such as M10 x 60, M12 x 80, M16 x 100
- Strength: Grade 8.8, or another property class if required
- Finish: plain, zinc plated, black oxide, hot dip galvanized, Dacromet, or other coating
- Quantity: quantity per size and total expected order volume
- Matched parts: nuts, washers, spring washers, hardened washers, or assembled kits
- Packaging: bulk carton, small box, woven bag, pallet, label, barcode, or project mark
- Persyaratan inspeksi: sertifikat material, laporan dimensi, kekerasan, uji tarik, ketebalan lapisan, semprotan garam, atau inspeksi pihak ketiga
Send the details through the meminta penawaran halaman atau hubungi XZ Fastener for a direct review of DIN 931 Grade 8.8 hex bolts and related fastener products.
FAQ
What is the difference between DIN 931 and DIN 933 hex bolts?
DIN 931 is a partial-thread hex head bolt, while DIN 933 is a full-thread hex head bolt. DIN 931 is often used when an unthreaded shank is preferred through the clamped parts, while DIN 933 full thread hex bolts are useful when full thread engagement is needed across shorter or variable grip lengths.
Can DIN 931 Grade 8.8 hex bolts be supplied with nuts and washers?
Yes. DIN 934 hex nuts, flat washers, spring washers, and hardened washers can be supplied according to order requirement. Matched sets are recommended when thread fit, coating thickness, or project receiving control is important.
Which finish should I choose for Grade 8.8 DIN 931 bolts?
Zinc plated finish is common for indoor use, black oxide is often selected for machinery appearance, and hot dip galvanizing is usually preferred for outdoor exposure. Dacromet or zinc flake coatings can also be reviewed when higher corrosion resistance is required.
Are Grade 8.8 bolts suitable for structural applications?
Grade 8.8 bolts are widely used in structural and machinery applications, but final suitability depends on the project standard, load condition, installation method, nut and washer selection, and required inspection documents.
Can XZ Fastener supply DIN 931 bolts in custom lengths?
Standard DIN 931 sizes are common, and custom or less common lengths can be reviewed according to diameter, quantity, material, and finish. A drawing or complete size list helps confirm feasibility.
What documents can be requested with DIN 931 Grade 8.8 hex bolts?
Depending on the order, buyers may request material certificates, dimensional reports, hardness results, tensile test reports, coating thickness checks, packing photos, or third-party inspection support.
Send Your DIN 931 Grade 8.8 Hex Bolt Inquiry
For a faster quotation, send your size list, finish, quantity, packaging method, and inspection requirements. XZ Fastener can review DIN 931 Grade 8.8 hex bolts, matched nuts and washers, metric hex head bolts, DIN 933 full thread hex bolts, zinc plated DIN 933 bolts, black oxide DIN 933 bolts, hot dip galvanized DIN 933 bolts, and related Grade 8.8 carbon steel hex bolts according to your purchasing plan.
Minta Penawaran
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文