XZ Fastener Internal Thread Concrete Anchors
penurunan pemasok jangkar Cina
XZ Fastener supplies drop in anchors from China for flush-mounted concrete fastening where an internally threaded anchor is required for bolts, studs or threaded rod assemblies. Drop in anchors are commonly used for pipe supports, suspended services, cable trays, machinery brackets, HVAC hangers, ceiling fixtures and equipment support points in solid concrete. Products can be supplied in carbon steel or stainless steel, with zinc plating, hot dip galvanizing, plain finish or passivation according to order requirement. Sizes, internal thread, setting depth, packaging and inspection details can be confirmed from drawings, samples or buyer specifications.
Spesifikasi Singkat
What Buyers Should Know Before Sourcing Drop In Anchors
Drop in anchors are internally threaded expansion anchors installed into pre-drilled holes in solid concrete. After the anchor is inserted, a setting tool expands the internal plug and locks the anchor body against the concrete. Buyers should confirm thread size, outside diameter, anchor length, setting depth, compatible bolt or threaded rod size, finish, base material and installation tool requirement before ordering.
For project comparison, XZ Fastener’s guide on penggunaan jangkar drop-in, kapasitas beban dan pemilihan provides practical points for buyers reviewing suspended supports and flush-mounted anchoring.
Catatan Pengadaan
- Drop in anchors are normally used in solid concrete rather than hollow base materials.
- Internal thread size must match the bolt, stud or threaded rod used on site.
- Correct setting tool use is important for expansion and installation reliability.
- For overhead suspension, confirm project load and inspection requirements clearly.
Deskripsi Pembelian Umum
Common RFQ descriptions include M6 zinc plated drop in anchor, M8 internal thread concrete anchor, M10 drop in anchor for threaded rod, M12 stainless steel drop in anchor for humid environments, carbon steel drop in anchor with yellow zinc finish and heavy-duty drop in anchors for suspended pipe supports. Buyers can also review the jangkar drop-in referensi produk saat menyiapkan daftar ukuran dan persyaratan pengemasan.
Untuk pembelian pengikat gabungan, XZ Fastener juga dapat mengutip item terkait seperti baut hex ulir penuh DIN 933, baut hex baja karbon Grade 8.8, baut kepala hex metrik, baut DIN 933 berlapis seng, baut oksida hitam DIN 933 dan baut hot dip galvanis Baut DIN 933 sesuai kebutuhan pesanan.
Tabel Spesifikasi Detail
| Barang | Opsi Umum | Konfirmasi Pembeli Diperlukan |
|---|---|---|
| Tipe Jangkar | Standard drop in anchor, lipped drop in anchor, stainless steel drop in anchor | Flush installation, setting method, base concrete and load direction |
| Ukuran Benang | M6, M8, M10, M12, M16, M20 and inch thread sizes upon request | Internal thread size, thread depth and compatible bolt or rod |
| Ukuran Tubuh | Standar diameter luar dan panjang sesuai kebutuhan pesanan | Drill hole diameter, anchor length and minimum embedment depth |
| Bahan | Baja karbon, baja karbon sedang, baja tahan karat 304/316 | Kelas, lingkungan korosi dan preferensi magnetik |
| Permukaan Selesai | Polos, seng elektro, seng kuning, oksida hitam, galvanis celup panas, baja tahan karat pasif | Ketebalan lapisan, warna, kebutuhan semprotan garam, dan kesesuaian benang |
| Installation Accessory | Setting tool available upon request for matched anchor sizes | Manual or project installation method and tool quantity |
| Pengepakan | Bulk cartons, inner boxes, plastic bags, pallets, private labels and shipping marks | Jumlah per kotak, batas berat karton, persyaratan barcode dan palet |
| Inspeksi | Dimension check, internal thread gauge, coating inspection, visual sorting, packing review | Tingkat AQL, format laporan, dan persyaratan inspeksi pihak ketiga |
Penjelasan Materi dan Kelas
Carbon steel drop in anchors are commonly selected for indoor construction, pipe suspension, cable tray support and equipment bracket installation. Stainless steel drop in anchors are suitable for humid, wash-down or corrosive environments where rust resistance is more important. Material choice should consider base concrete, service environment, project load and the strength of the mating bolt or threaded rod.
Untuk pemilihan jangkar yang lebih luas, panduan XZ Fastener’ tentang bagaimana memilih jangkar yang tepat untuk aplikasi beton can help buyers compare drop in anchors with wedge anchors, sleeve anchors and chemical anchor systems.
Panduan Pemilihan Permukaan Akhir
Penggunaan Dalam Ruangan dan Umum
Zinc plated drop in anchors are widely used for dry indoor work, suspended pipe systems, electrical supports and general concrete fixing. Plain finish can be supplied for controlled storage, temporary installation or buyer-specified treatment, while black oxide may be requested for selected industrial assemblies.
Paparan Luar Ruangan dan Korosi
Hot dip galvanized or stainless steel drop in anchors may be considered where moisture, outdoor exposure or corrosion risk is present. The internal thread should be checked after finishing when coating thickness is important. Buyers can review XZ Fastener’s panduan pemilihan permukaan akhir saat membandingkan pilihan pelapis.
Manufaktur dan Kontrol Kualitas
Drop in anchor production may include material cutting, body forming or machining, drilling or internal shaping, tapping, plug processing, surface finishing, inspection and packing. Internal thread accuracy, body diameter, plug fit and anchor length are important because they affect installation with the matching setting tool and the bolt or threaded rod used on site.
Untuk ukuran khusus, gambar atau badan jangkar non-standar, pengencang khusus dapat disediakan sesuai dengan kebutuhan pembeli. Inspeksi dapat mencakup pemeriksaan pengukur ulir, pengukuran panjang dan diameter, tampilan lapisan, peninjauan kesesuaian steker, penyortiran visual, dan verifikasi pengepakan. XZ Fastener juga memberikan informasi praktis tentang kontrol kualitas pengikat selama produksi.
Aplikasi
- Suspended pipe supports, threaded rod hangers and HVAC ceiling fixtures
- Cable trays, electrical supports and mechanical service installations
- Machinery brackets, equipment supports and maintenance fixing points
- Concrete ceiling and floor applications requiring flush internal threads
- Commercial buildings, factories, warehouses and infrastructure maintenance
Cara Mendapatkan Penawaran Lebih Cepat
To receive a faster quotation, send the internal thread size, anchor outside diameter, total length, material grade, finish, quantity, packaging method and inspection requirements. If a setting tool is required, mention the tool size and quantity. For project orders, include drawings, installation notes, bolt or threaded rod specifications, label requirements and carton weight limits.
FAQ
Can XZ Fastener supply drop in anchors from China according to drawings?
Yes. Drop in anchors can be supplied according to buyer drawings, samples or project specifications. Please provide internal thread size, body diameter, length, material, finish and expected quantity.
Are drop in anchors suitable for overhead suspension?
Drop in anchors are commonly used for threaded rod and suspended supports in solid concrete. The project should confirm load requirement, installation depth, base concrete condition and inspection needs.
Can setting tools be supplied with drop in anchors?
Matched setting tools can be discussed according to anchor size and order requirement. Buyers should specify whether tools are needed with the anchor shipment.
Which finish is suitable for drop in anchors?
Pelapisan seng biasa dilakukan untuk penggunaan di dalam ruangan yang kering. Lapisan baja tahan karat atau galvanis hot dip dapat dipertimbangkan untuk lingkungan lembab atau luar ruangan, tergantung pada paparan proyek dan persyaratan kesesuaian benang.
What information is needed for a drop in anchor RFQ?
Please provide internal thread size, outside diameter, length, material, finish, quantity, packaging, inspection requirements and any drawing or sample photo. Mating bolt or threaded rod details are helpful.
Can mixed drop in anchor sizes be supplied in one order?
Mixed sizes can be discussed. Buyers should send a clear size list with quantity, finish, packaging and label requirements for each drop in anchor item.
Send Your Drop In Anchor Requirement
Send XZ Fastener your size list, finish, quantity, packaging method and inspection requirements. Drawings, samples, photos, setting tool needs or installation notes help confirm the correct drop in anchor specification and shorten quotation time.
Minta Penawaran
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文