XZ Fastener Internal Thread Concrete Anchors
中国落锚供应商
XZ Fastener supplies drop in anchors from China for flush-mounted concrete fastening where an internally threaded anchor is required for bolts, studs or threaded rod assemblies. Drop in anchors are commonly used for pipe supports, suspended services, cable trays, machinery brackets, HVAC hangers, ceiling fixtures and equipment support points in solid concrete. Products can be supplied in carbon steel or stainless steel, with zinc plating, hot dip galvanizing, plain finish or passivation according to order requirement. Sizes, internal thread, setting depth, packaging and inspection details can be confirmed from drawings, samples or buyer specifications.
快速规格
What Buyers Should Know Before Sourcing Drop In Anchors
Drop in anchors are internally threaded expansion anchors installed into pre-drilled holes in solid concrete. After the anchor is inserted, a setting tool expands the internal plug and locks the anchor body against the concrete. Buyers should confirm thread size, outside diameter, anchor length, setting depth, compatible bolt or threaded rod size, finish, base material and installation tool requirement before ordering.
For project comparison, XZ Fastener’s guide on 嵌入式锚栓的用途、承载能力和选择 provides practical points for buyers reviewing suspended supports and flush-mounted anchoring.
采购须知
- Drop in anchors are normally used in solid concrete rather than hollow base materials.
- Internal thread size must match the bolt, stud or threaded rod used on site.
- Correct setting tool use is important for expansion and installation reliability.
- For overhead suspension, confirm project load and inspection requirements clearly.
常见采购说明
Common RFQ descriptions include M6 zinc plated drop in anchor, M8 internal thread concrete anchor, M10 drop in anchor for threaded rod, M12 stainless steel drop in anchor for humid environments, carbon steel drop in anchor with yellow zinc finish and heavy-duty drop in anchors for suspended pipe supports. Buyers can also review the 插入式锚 准备尺寸表和包装要求时的产品参考。
对于组合紧固件采购，XZ Fastener还可以报价相关项目，如DIN 933全螺纹六角螺栓、8.8 级碳钢六角螺栓、公制六角头螺栓、镀锌DIN 933螺栓、黑色氧化DIN 933螺栓和热浸镀锌DIN 933 螺栓按订单要求。
详细规格表
| 项目 | 常用选项 | 需要买家确认 |
|---|---|---|
| 锚类型 | Standard drop in anchor, lipped drop in anchor, stainless steel drop in anchor | Flush installation, setting method, base concrete and load direction |
| 螺纹尺寸 | M6, M8, M10, M12, M16, M20 and inch thread sizes upon request | Internal thread size, thread depth and compatible bolt or rod |
| 机身尺寸 | 标准外径和长度根据订单要求 | Drill hole diameter, anchor length and minimum embedment depth |
| 材质 | 碳钢、中碳钢、不锈钢 304/316 | 牌号、腐蚀环境和磁性偏好 |
| 表面处理 | 普通、电镀锌、黄锌、黑色氧化、热镀锌、钝化不锈钢 | 涂层厚度、颜色、盐雾要求和螺纹配合 |
| Installation Accessory | Setting tool available upon request for matched anchor sizes | Manual or project installation method and tool quantity |
| 包装 | Bulk cartons, inner boxes, plastic bags, pallets, private labels and shipping marks | 每箱数量、纸箱重量限制、条形码和托盘要求 |
| 检查 | Dimension check, internal thread gauge, coating inspection, visual sorting, packing review | AQL等级、报告格式及第三方检验要求 |
材质及牌号说明
Carbon steel drop in anchors are commonly selected for indoor construction, pipe suspension, cable tray support and equipment bracket installation. Stainless steel drop in anchors are suitable for humid, wash-down or corrosive environments where rust resistance is more important. Material choice should consider base concrete, service environment, project load and the strength of the mating bolt or threaded rod.
对于更广泛的锚点选择，XZ Fastener’s 指南 如何为具体应用选择合适的锚栓 can help buyers compare drop in anchors with wedge anchors, sleeve anchors and chemical anchor systems.
表面处理选择指南
室内和一般用途
Zinc plated drop in anchors are widely used for dry indoor work, suspended pipe systems, electrical supports and general concrete fixing. Plain finish can be supplied for controlled storage, temporary installation or buyer-specified treatment, while black oxide may be requested for selected industrial assemblies.
户外和腐蚀暴露
Hot dip galvanized or stainless steel drop in anchors may be considered where moisture, outdoor exposure or corrosion risk is present. The internal thread should be checked after finishing when coating thickness is important. Buyers can review XZ Fastener’s 表面光洁度选择指南 在比较涂层选择时。
制造和质量控制
Drop in anchor production may include material cutting, body forming or machining, drilling or internal shaping, tapping, plug processing, surface finishing, inspection and packing. Internal thread accuracy, body diameter, plug fit and anchor length are important because they affect installation with the matching setting tool and the bolt or threaded rod used on site.
对于特殊尺寸、图纸或非标准锚体， 定制紧固件 可根据买家要求供货。检查可包括螺纹量规检查、长度和直径测量、涂层外观、插头配合检查、目视分类和包装验证。 XZ Fastener 还提供了实用信息 紧固件制造过程中的质量控制.
应用领域
- Suspended pipe supports, threaded rod hangers and HVAC ceiling fixtures
- Cable trays, electrical supports and mechanical service installations
- Machinery brackets, equipment supports and maintenance fixing points
- Concrete ceiling and floor applications requiring flush internal threads
- Commercial buildings, factories, warehouses and infrastructure maintenance
如何获得更快的报价
To receive a faster quotation, send the internal thread size, anchor outside diameter, total length, material grade, finish, quantity, packaging method and inspection requirements. If a setting tool is required, mention the tool size and quantity. For project orders, include drawings, installation notes, bolt or threaded rod specifications, label requirements and carton weight limits.
常问问题
Can XZ Fastener supply drop in anchors from China according to drawings?
Yes. Drop in anchors can be supplied according to buyer drawings, samples or project specifications. Please provide internal thread size, body diameter, length, material, finish and expected quantity.
Are drop in anchors suitable for overhead suspension?
Drop in anchors are commonly used for threaded rod and suspended supports in solid concrete. The project should confirm load requirement, installation depth, base concrete condition and inspection needs.
Can setting tools be supplied with drop in anchors?
Matched setting tools can be discussed according to anchor size and order requirement. Buyers should specify whether tools are needed with the anchor shipment.
Which finish is suitable for drop in anchors?
镀锌通常用于干燥的室内使用。根据项目暴露和螺纹配合要求，可以考虑在潮湿或室外环境中使用不锈钢或热浸镀锌饰面。
What information is needed for a drop in anchor RFQ?
Please provide internal thread size, outside diameter, length, material, finish, quantity, packaging, inspection requirements and any drawing or sample photo. Mating bolt or threaded rod details are helpful.
Can mixed drop in anchor sizes be supplied in one order?
Mixed sizes can be discussed. Buyers should send a clear size list with quantity, finish, packaging and label requirements for each drop in anchor item.
Send Your Drop In Anchor Requirement
Send XZ Fastener your size list, finish, quantity, packaging method and inspection requirements. Drawings, samples, photos, setting tool needs or installation notes help confirm the correct drop in anchor specification and shorten quotation time.
索取报价
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文