carbon steel threaded rods wholesale supplier
XZ Fastener supplies carbon steel threaded rods for wholesalers, distributors, construction supply companies, pipe support fabricators, and maintenance inventory buyers. As a carbon steel threaded rods wholesale supplier, we support DIN 975, DIN 976, ASTM, metric, and inch thread requirements with practical options for grade, length, finish, carton labels, bundle packing, and pallet loading. Rods can be supplied in standard full lengths or cut-to-length pieces according to order requirement. Buyers can request plain, zinc plated, black oxide, hot dip galvanized, Dacromet, or other finishes with inspection details confirmed before shipment.
Quick Specs
What Buyers Should Know Before Sourcing Carbon Steel Threaded Rods
Plan the wholesale range before ordering
Wholesale threaded rod orders often include several diameters, lengths, grades and finishes in one shipment. Buyers should confirm whether rods are needed in standard full lengths, shorter cut studs, mixed cartons or bundled pallets. When a purchasing list includes rods together with nuts, washers, bolts and anchors, XZ Fastener can help match related fastener products for repeat distributor supply.
Check fit, load and packing together
Threaded rods must fit the selected nuts, anchors, coupling nuts and support hardware. Grade, thread pitch, coating thickness and straightness all affect assembly performance. For load-related questions, buyers can review the guide on threaded rod load capacity before confirming diameter and grade for construction or industrial use.
Common Purchasing Descriptions
Clear purchasing descriptions help XZ Fastener check stock planning, production route, coating, packing and shipment cost more quickly. Common wholesale descriptions include:
- DIN 975 carbon steel threaded rods, M8 x 1000 mm, class 4.8, zinc plated, bundle packing.
- DIN 976 cut threaded rods, M12 x 300 mm, grade 8.8, black oxide, chamfered ends.
- ASTM B7 threaded rods, UNC thread, hot dip galvanized, matched nuts required.
- Metric full thread rods, M16 x 2000 mm, yellow zinc plated, private label cartons.
- Mixed wholesale order with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts and metric hex head bolts.
- Coated fastener list including zinc plated DIN 933 bolts, black oxide DIN 933 bolts and hot dip galvanized DIN 933 bolts.
For special lengths, private labels, non-standard thread pitch or drawing-based threaded parts, XZ Fastener can review custom fasteners according to order requirement.
Detailed Specifications Table
| Предмет | Available Specification | Wholesale Buyer Notes |
|---|---|---|
| Product type | Fully threaded rods, cut threaded studs, threaded bars and special threaded rods | Confirm whether goods are supplied as long rods, cut pieces or mixed length packages. |
| Стандарт | DIN 975, DIN 976, ASTM A307, ASTM A193 B7, ISO, JIS or customer drawing | Standard selection affects thread tolerance, material grade and matching hardware. |
| Diameter range | Common metric sizes from M6 to M36; inch sizes available upon request | Distributors often combine fast-moving sizes with project-specific diameters. |
| Length range | 1 m, 2 m, 3 m, 6 ft, 12 ft or cut length according to order requirement | Long rods should be bundled carefully to reduce bending during transport and storage. |
| Thread type | Metric coarse, metric fine, UNC, UNF or special pitch | Always provide thread pitch when the requirement is not standard coarse thread. |
| Материал | Low carbon steel, medium carbon steel or alloy steel | Material is selected according to mechanical grade and application environment. |
| Strength class | 4.8, 5.8, 8.8, 10.9, B7 and other project grades | Higher-strength rods may require heat treatment and mechanical test records. |
| Finish | Plain, zinc plated, yellow zinc, black oxide, phosphate, HDG, Dacromet, Geomet | Coating thickness can affect thread fit, nut matching and assembly torque. |
| Packing | Bundles, cartons, wooden cases, pallets or customized wholesale packing | Private labels, barcode labels and itemized carton marks can be discussed. |
| Inspection | Dimension, thread gauge, straightness, hardness, tensile and coating checks | Photos, test reports and third-party inspection can be arranged according to order requirement. |
Material and Grade Explanation
Carbon steel threaded rods are commonly selected for wholesale stock because they provide practical strength, wide availability and flexible surface treatment options. Class 4.8 and 5.8 rods are often used for general fixing and support work. Grade 8.8, 10.9 or B7 may be selected for heavier mechanical assemblies, structural supports or project requirements where higher tensile strength is specified.
Grade selection should be reviewed together with nut grade, thread engagement, coating, installation method and working environment. A stronger rod is not always a direct replacement if the mating parts or installation torque are not matched. XZ Fastener’s threaded rod strength grades guide gives buyers a practical comparison of 4.8, 8.8, B7 and stainless steel options.
Surface Finish Selection Guide
| Finish | Typical Use | Wholesale Purchasing Consideration |
|---|---|---|
| Plain or oiled | Indoor use, further processing or short-term storage | Lower corrosion resistance; moisture control is important for inventory storage. |
| Zinc plated | General construction fixing, equipment installation and distributor inventory | Common for standard wholesale cartons where appearance and cost matter. |
| Yellow zinc plated | Visible hardware, replacement stock and general assembly | Confirm color requirement and local environmental restrictions before ordering. |
| Чернение | Indoor machinery, black hardware sets and low-reflection assemblies | Usually requires oil protection and is not preferred for outdoor exposure. |
| Hot dip galvanized | Outdoor construction, utility projects and steel structures | Thread fit, coating thickness and matching nut requirements should be checked. |
| Dacromet or Geomet | Higher corrosion resistance with controlled coating thickness | Available upon request for project specifications and special assemblies. |
For buyers comparing coating choices across rods, bolts, studs, nuts and washers, XZ Fastener provides a practical fastener coating guide.
Manufacturing and Quality Control
Carbon steel threaded rods can be produced by thread rolling, thread cutting or a combined process depending on diameter, material grade, length and quantity. A typical supply process includes raw material preparation, straightening, cutting, threading, heat treatment when required, surface finishing, thread cleaning, inspection, labeling and packing. Cut-to-length rods can be chamfered or deburred according to order requirement.
Quality control may include diameter checking, length tolerance, straightness inspection, thread gauge testing, surface appearance, hardness, tensile strength, coating thickness and packing verification. For buyers reviewing how threads are formed, the thread rolling process guide explains important production points for bolts, screws, studs and rods.
Приложения
Carbon steel threaded rods are used where adjustable connection length, full thread engagement and convenient site cutting are needed. Common wholesale applications include:
- Pipe hangers, HVAC supports, cable trays and suspended installation systems.
- Construction anchoring, formwork, embedded fixing and base plate connections.
- Steel structure bracing, spacer assemblies, tie rods and frame adjustment.
- Machinery mounting, equipment alignment and industrial maintenance repair.
- Distributor stock for resale, cutting service, local fabrication and project supply.
Wholesale buyers building a broader inventory can use XZ Fastener’s guide on how to build a fastener stock list to organize common sizes, grades and finishes.
How to Get a Faster Quotation
A complete inquiry helps XZ Fastener check size mix, production route, coating, packing and shipment preparation quickly. For carbon steel threaded rod wholesale orders, please include:
- Diameter, length, thread pitch and quantity for each size.
- Required standard such as DIN 975, DIN 976, ASTM, ISO or drawing-based specification.
- Material and strength grade such as 4.8, 8.8, 10.9 or B7.
- Finish requirement, including coating thickness or salt spray expectation when specified.
- Cutting, chamfering, deburring or special end-processing requirements.
- Packaging method, carton labels, barcode labels, bundle weight and pallet requirement.
- Inspection documents, test reports, pre-shipment photos or third-party inspection needs.
Send drawings, sample photos or an Excel size list through the request a quote page. For urgent replenishment or distributor planning, please contact XZ Fastener with target delivery schedule and destination country.
Часто задаваемые вопросы
Can XZ Fastener supply carbon steel threaded rods for wholesale stock?
Yes. Carbon steel threaded rods can be supplied for wholesale stock in common diameters, lengths, grades and finishes according to order requirement.
Can threaded rods be packed with private labels or barcode labels?
Yes. Carton labels, barcode labels, shipping marks, bundle labels and pallet packing can be discussed before order confirmation.
Can rods be supplied as both full length and cut-to-length pieces?
Yes. Standard full lengths and cut-to-length rods can be supplied. Chamfering, deburring and special packing can be arranged according to the buyer’s requirement.
Which grades are common for carbon steel threaded rods?
Common grades include 4.8, 5.8, 8.8, 10.9 and B7. The correct grade depends on load requirement, nut matching, coating and installation conditions.
What finish should wholesale buyers choose for outdoor use?
Hot dip galvanized, Dacromet, Geomet or other corrosion-resistant finishes may be considered for outdoor use. Thread fit and matching nut requirements should be checked before ordering.
What information is needed for a faster wholesale quotation?
Please send the size list, standard, grade, material, finish, quantity, packaging and inspection requirements. Drawings or photos are useful for custom lengths or special threads.
Send Your Threaded Rod Wholesale Inquiry
For a practical quotation, send XZ Fastener your size list, finish, quantity, packaging plan and inspection requirements. Please include the standard, material grade, thread pitch, rod length, label needs, bundle weight, pallet requirement and destination country when available.
Запросить цитату
English 
Español 
Tiếng Việt 
Русский 
العربية