eksportir batang berulir baja karbon
XZ Fastener exports carbon steel threaded rods for importers, distributors, construction contractors, pipe support fabricators, and industrial maintenance buyers. As a carbon steel threaded rods exporter, we support DIN 975, DIN 976, ASTM, metric, and inch thread requirements with grade, length, finish, packing, and inspection details confirmed before shipment. Rods can be supplied in standard full lengths or cut-to-length pieces according to order requirement. Export packing, bundle labels, pallet loading, pre-shipment photos, and test documents are available upon request for buyers who need predictable supply control across international projects and repeat orders.
Spesifikasi Singkat
Yang Harus Diketahui Pembeli Sebelum Membeli Batang Berulir Baja Karbon
Define rod length and thread requirement
International threaded rod orders should clearly state the required standard, diameter, pitch, total length, grade, finish and packing style. Some buyers need one-meter or three-meter rods, while others need cut threaded studs with chamfered ends. When comparing carbon steel with corrosion-resistant alternatives, XZ Fastener’s referensi produk batang berulir penuh can help buyers review similar rod formats before confirming material.
Review the complete assembly
A threaded rod is usually used together with nuts, washers, anchors, couplers or support hardware. Load capacity depends on rod grade, nut grade, thread engagement, coating thickness, installation method and working environment. For procurement teams checking application limits, the guide on kapasitas beban batang berulir provides useful background for safer specification review.
Deskripsi Pembelian Umum
Clear descriptions help XZ Fastener check production feasibility, packing method and shipment preparation more quickly. Typical export purchasing descriptions include:
- DIN 975 carbon steel threaded rods, M10 x 1000 mm, class 4.8, zinc plated, bundle packing.
- DIN 976 cut threaded studs, M12 x 300 mm, grade 8.8, black oxide, chamfered ends.
- ASTM B7 threaded rods, UNC thread, hot dip galvanized, matched heavy hex nuts required.
- Metric full thread rods, M16 x 2000 mm, yellow zinc plated, export pallet packing.
- Project order with DIN 933 full thread hex bolts, Grade 8.8 carbon steel hex bolts and metric hex head bolts.
- Mixed coated fastener list including zinc plated DIN 933 bolts, black oxide DIN 933 bolts and hot dip galvanized DIN 933 bolts.
For non-standard pitches, special cutting lengths, marking, bundle weight limits or drawing-based threaded parts, XZ Fastener can review pengencang khusus sesuai dengan kebutuhan proyek.
Tabel Spesifikasi Detail
| Barang | Spesifikasi yang Tersedia | Ekspor Catatan Pembeli |
|---|---|---|
| Jenis produk | Batang berulir penuh, kancing berulir potong, batang berulir, dan batang berulir khusus | Confirm whether goods are shipped as long rods, short studs or mixed lengths. |
| Standar | DIN 975, DIN 976, ASTM A307, ASTM A193 B7, ISO, JIS or customer drawing | Standard selection affects thread tolerance, material grade and matching hardware. |
| Kisaran diameter | Common metric sizes from M6 to M36; inch sizes available upon request | Large diameters and high-strength grades may require longer preparation time. |
| Rentang panjang | 1 m, 2 m, 3 m, 6 kaki, 12 kaki atau dipotong panjang sesuai kebutuhan pesanan | Long rods should be packed to reduce bending risk during transport. |
| Jenis benang | Metrik kasar, metrik halus, UNC, UNF atau nada khusus | Always provide thread pitch when the requirement is not standard coarse thread. |
| Bahan | Baja karbon rendah, baja karbon sedang atau baja paduan | Material is selected according to mechanical grade and installation environment. |
| Kelas kekuatan | 4.8, 5.8, 8.8, 10.9, B7 and other project grades | Higher-strength rods may require heat treatment and mechanical test records. |
| Selesai | Polos, berlapis seng, seng kuning, oksida hitam, fosfat, HDG, Dacromet, Geomet | Coating thickness can affect thread fit, nut matching and assembly torque. |
| Pengepakan | Bundel, karton, kotak kayu, palet atau kemasan ekspor yang disesuaikan | Provide shipping marks, bundle weight and pallet limits before order confirmation. |
| Inspeksi | Pemeriksaan dimensi, pengukur ulir, kelurusan, kekerasan, tarik dan pelapisan | Photos, test reports and third-party inspection can be discussed before shipment. |
Penjelasan Materi dan Kelas
Carbon steel threaded rods are selected for practical strength, wide availability and flexible surface treatment. Class 4.8 and 5.8 rods are often used for general fixing and support work, while grade 8.8, 10.9 or B7 may be selected for heavier mechanical or construction assemblies. The correct choice depends on load condition, nut grade, thread engagement, working temperature, corrosion exposure and project specification.
Buyers should avoid changing grade based only on price or availability. Higher strength can be useful, but it may require compatible nuts, controlled heat treatment, suitable coating and proper installation control. The threaded rod strength grades guide explains common grade choices including 4.8, 8.8, B7 and stainless steel options.
Panduan Pemilihan Permukaan Akhir
| Selesai | Penggunaan Khas | Pertimbangan Pembelian |
|---|---|---|
| Biasa atau diminyaki | Indoor use, short-term protection or further processing | Lower corrosion resistance; moisture-proof packing should be considered. |
| Berlapis seng | General construction fixing, equipment installation and distributor inventory | Common for export orders needing clean appearance and basic corrosion protection. |
| Berlapis seng kuning | Visible hardware, replacement stock and general assembly | Confirm color preference and any local environmental restriction before production. |
| Oksida hitam | Indoor machinery, low-reflection assemblies and black hardware sets | Usually requires oil protection and careful storage; not preferred for outdoor exposure. |
| Galvanis celup panas | Outdoor construction, steel structures and utility projects | Thread fit, nut oversizing and coating thickness should be confirmed in advance. |
| Dacromet atau Geomet | Ketahanan korosi yang lebih tinggi dengan ketebalan lapisan yang terkontrol | Available upon request when project specifications require enhanced protection. |
For buyers comparing zinc, hot dip galvanizing, Dacromet, PTFE and other coatings across rods, studs, bolts and nuts, XZ Fastener provides a practical panduan lapisan pengikat.
Manufaktur dan Kontrol Kualitas
Carbon steel threaded rods can be produced by thread rolling, thread cutting or a combined process depending on diameter, material grade, length and order quantity. A typical export production flow includes raw material preparation, straightening, cutting, threading, heat treatment when required, surface finishing, thread cleaning, inspection, packing and loading preparation.
Inspection may include diameter checking, length tolerance, thread gauge testing, straightness, surface appearance, hardness, tensile strength, coating thickness and packing verification. For buyers who want to understand the production route, XZ Fastener’s panduan proses penggulungan benang explains why controlled thread forming matters for bolts, screws, studs and rods.
Aplikasi
Carbon steel threaded rods are used where adjustable connection length, full thread engagement and simple field installation are required. Common export applications include:
- Pipe hangers, HVAC supports, cable trays and suspended installation systems.
- Construction anchoring, formwork, embedded fixing and base plate connections.
- Steel structure bracing, spacer assemblies, tie rods and frame adjustment.
- Machinery mounting, equipment alignment and industrial maintenance repair.
- Distributor stock for cutting, resale, fabrication workshops and project supply.
When the rod will be paired with nuts, this tabel ukuran baut stud can help buyers review diameter, length, thread and nut requirement details before final confirmation.
Cara Mendapatkan Penawaran Lebih Cepat
A complete inquiry helps XZ Fastener check raw material, production route, coating, packing and shipping preparation quickly. For carbon steel threaded rod export orders, please include:
- Diameter, length, thread pitch and quantity for each size.
- Required standard such as DIN 975, DIN 976, ASTM, ISO or drawing-based specification.
- Material and strength grade such as 4.8, 8.8, 10.9 or B7.
- Finish requirement, including coating thickness or salt spray expectation when specified.
- Persyaratan pemotongan, chamfering, deburring, atau pemrosesan akhir khusus.
- Packaging method, shipping marks, label format, bundle weight and pallet requirement.
- Inspection documents, test reports, pre-shipment photos or third-party inspection needs.
Send drawings, sample photos or an Excel size list through the meminta penawaran page. For urgent schedules, please hubungi XZ Fastener with destination country and target delivery date.
FAQ
Can XZ Fastener export carbon steel threaded rods in standard full lengths?
Yes. Standard full lengths such as 1 m, 2 m, 3 m, 6 ft and 12 ft can be discussed according to diameter, grade, finish and packing requirement.
Can threaded rods be supplied as cut-to-length studs?
Yes. Cut-to-length rods can be supplied according to order requirement. End chamfering, deburring and special packing can be confirmed before production.
Which grades are commonly exported for carbon steel threaded rods?
Common grades include 4.8, 5.8, 8.8, 10.9 and B7. The correct grade depends on load requirement, nut matching, coating and installation conditions.
What finish is suitable for outdoor threaded rods?
Hot dip galvanized, Dacromet, Geomet or other corrosion-resistant finishes may be considered for outdoor use. Thread fit and matching nut requirements should be checked before ordering.
How are long threaded rods packed for export?
Long rods are commonly packed in bundles, cartons, wooden cases or pallets. Packing should consider rod length, total weight, handling method, shipping marks and destination requirements.
What documents can be prepared for export orders?
Inspection reports, material information, coating details, packing photos and other order-related documents can be discussed according to buyer requirements before shipment.
Send Your Threaded Rod Export Inquiry
For a practical quotation, send XZ Fastener your size list, finish, quantity, packaging plan and inspection requirements. Please include the standard, material grade, thread pitch, rod length, end processing, shipping marks and destination country when available.
Minta Penawaran
English 
Español 
Français 
Español de México 
العربية 
Deutsch 
Русский 
Tiếng Việt 
Bahasa Indonesia 
Italiano 
简体中文